• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (16): 322-330.doi: 10.3901/JME.260714

Previous Articles    

Research on Control Technology of Variable Stiffness Yaw Damper

SUN Baokai1, DAI Liangcheng1, CHI Maoru1, TAN Lei2   

  1. 1. State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu 610031;
    2. Research and Development Center, CRRC Qingdao Sifang Co., Ltd., Qingdao 266111
  • Received:2025-08-06 Revised:2026-02-15 Published:2026-10-14

Abstract: Wheel wear, excessive wheel truing, or excessive rail grinding can lead to changes in the equivalent conicity of wheel-rail matching, which in turn trigger primary and secondary hunting instability phenomena in vehicles. Traditional yaw dampers are difficult to effectively cope with different types of hunting. To address this, a variable stiffness yaw damper based on a hydraulic rubber joint is proposed. The series stiffness of the damper is dynamically adjusted through an electromagnetic proportional valve, and a corresponding control strategy is designed. A mechanical model of the variable stiffness yaw damper and its hydraulic rubber joint is established, and the dynamic characteristics of the hydraulic rubber joint are verified through experiments. Based on the damper's mechanical model and control strategy, a vehicle co-simulation model is built to analyze the suppression effect of the variable stiffness yaw damper on vehicle hunting motion under different wheel-rail matching conditions. The results show that under primary hunting conditions, the amplitude at the main frequency of the lateral acceleration vibration of the carbody is reduced by 78.9%; under secondary hunting conditions, the amplitude at the main frequency of the lateral acceleration vibration at the end of the bogie is reduced by 79.7%.

Key words: yaw damper, variable stiffness joint, damper model, control techniques

CLC Number: