• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (16): 52-61.doi: 10.3901/JME.260554

Previous Articles    

Research on Wheel-rail Adhesion Characteristics of High-speed Trains Considering Electromechanical Coupling Effects

GUO Yong, REN Zunsong, WANG Wenquan, MA Juefan   

  1. School of Mechanical, Electronic & Control Engineering, Beijing Jiaotong University, Beijing 100044
  • Received:2025-08-13 Revised:2026-04-02 Published:2026-10-14

Abstract: With the increasing speed of high-speed trains, the wheel rail adhesion characteristics under Electromechanical Coupling need to be further studied. Based on the vehicle dynamics theory, a high-speed vehicle system dynamics model is established by comprehensively considering the traction motor control, electromechanical coupling and wheel rail adhesion. The vibration characteristics and wheel rail contact characteristics of high-speed train system excited by motor harmonic torque are studied, and the effects of vehicle speed, wheel rail contact conditions and traction load on wheel rail adhesion characteristics are analyzed. The research results show that the harmonic torque of the motor aggravates the vibration of the frame and wheel set to a certain extent, increases the axle load transfer phenomenon, changes the wheel rail contact characteristics, increases the wheel rail creep rate, and makes the wheel set easier to lose the wheel rail adhesion. Under the electromechanical coupling effect, the increase of train speed will further degrade the wheel rail adhesion performance. When the train is running under traction, both dry and wet conditions meet the creep rate safety threshold, and oil condition can cause wheelset slip. When the rail surface is in the oil state, under the influence of harmonic torque excitation of the motor, wheelset slip will still occur when the traction load is reduced to 80%. When the traction load is reduced to 70% or less, the wheel rail adhesion performance can meet the threshold requirements of wheel rail creep rate for safe operation of high-speed trains. The research results can provide theoretical support for traction optimization and adhesion control strategy design of high-speed train.

Key words: electromechanical coupling, harmonic torque, wheel rail adhesion, creepage

CLC Number: