Friction Torque Model and Experiment Verification on the Free Rotor of Hydraulic Transformer

doi:10.3901/JME.2025.06.308

Abstract

Abstract: Friction torque model is an essential prerequisite for the rotor dynamic analysis and performance evaluation of hydraulic transformer. However, an accurate friction torque model within the full speed range is currently lacking. Based on the Stribeck friction model, the friction states of each friction pair are analyzed. The friction coefficient for boundary lubrication, mixed lubrication, and fluid lubrication are solved successively. According to the continuous condition of the friction coefficient, the calculation method of the transition points between lubrication states is given, and the general friction coefficient model for each friction pair is established. Based on the general friction coefficient model, the friction parameters of the slipper pair and the flow distribution pair are determined, the friction coefficients are solved, and the calculation method of the friction torque is given. The stirring torque of the free rotor is calculated, and the friction torque model of the free rotor in the full speed range is established. A platform on friction torque of the free rotor is built, and the test is carried out to verify the correctness of the theoretical model. The friction torque model provides a good basis for the dynamic analysis and accurate control of the hydraulic transformer.

Key words: hydraulic transformer, free rotor, Stribeck friction model, friction coefficient, friction torque

CLC Number:

TH137

BAO Qianqian, ZHOU Junjie, JING Chongbo, LIAO Wenbo, DU Shanxiao, ZHANG Zhu. Friction Torque Model and Experiment Verification on the Free Rotor of Hydraulic Transformer[J]. Journal of Mechanical Engineering, 2025, 61(6): 308-315.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2025.06.308

http://www.cjmenet.com.cn/EN/Y2025/V61/I6/308

References

[1] Achten P A J，Fu Z，Vael G E M. Transforming future hydraulics：A new design of a hydraulic transformer[C]//Proc. 5th Scandinavian International Conference on Fluid Power，Linkoping，1997：1-24.
[2] ZHOU Junjie，JING Chongbo，WU Wei. Energy efficiency modeling and validation of swash plate-rotating type hydraulic transformer[J]. Energy，2020，193：234-239.
[3] JING Chongbo，ZHOU Junjie，YUAN Shihua. Research on the pressure ratio characteristics of a swash plate-rotating hydraulic transformer[J]. Energies，2018，11(6)：161.
[4] 姜继海. 二次调节压力耦联静液传动技术[M]. 北京：机械工业出版社，2012. JIANG Jihai. Secondary regulating pressure coupled hydrostatic transmission technology[M]. Beijing：China Machine Press，2012.
[5] 姜继海，杨冠中. 液压系统中液压变压器的发展及研究现状[J]. 长安大学学报，2016，36(6)：118-126. JIANG Jihai，YANG Guanzhong. Development and research status of hydraulic transformer in hydraulic system[J]. Journal of Chang’an University，2016，36(6)：118-126.
[6] Vael G，Achten P. The innas fork lift truck-working under constant pressure[C/CD]//Proceedings of the 1st International Fluid Power Conference，Aachen，Germany，1998.
[7] SHEN Wei，JIANG Jihai，SU Xiaoyu，et al. Control strategy analysis of the hydraulic hybrid excavator[J]. Journal of the Franklin Institute，2015，352(2)：541-561.
[8] WU Wei，HU Jibin，JING Chongbo. Investigation of energy efficient hydraulic hybrid propulsion system for automobiles[J]. Energy，2014，73：497-505.
[9] WU Wei，HU Jibin，YUAN Shihua. A hydraulic hybrid propulsion method for automobiles with self-adaptive system[J]. Energy，2016，114：683-692.
[10] SHEN W，KARIMI H R，ZHAO R. Comparative analysis of component design problems for integrated hydraulic transformers[J]. International Journal of Advanced Manufacturing Technology，2019，103(1-4)：389-407.
[11] 王永富，王殿辉，柴天佑. 摩擦诱发极限环的分析与自适应主动控制[J]. 机械工程学报，2011，47(11)：45-51. WANG Yongfu，WANG Dianhui，CHAI Tianyou. Analysis and adaptive active control of friction-induced limit cycle[J]. Journal of Mechanical Engineering，2011，47(11)：44-51.
[12] 刘成强. 电液伺服斜盘柱塞式液压变压器的研究[D]. 哈尔滨：哈尔滨工业大学，2013. LIU Chengqiang. Electro-hydraulic servo swashplate piston hydraulic transformer[D]. Harbin：Harbin Institute of Technology，2013.
[13] 杨冠中. 变量液压变压器的特性及其配流研究[D]. 哈尔滨：哈尔滨工业大学，2019． YANG Guanzhong. Research on characteristics of variable hydraulic transformer and its flow distribution[D]. Harbin：Harbin Institute of Technology，2019.
[14] Werndin R，Palmberg J O. Controller design for a hydraulic transformer[C]//Proceedings of 5th International Conference on Fluid Power Transmission and Control，Hangzhou，China，2001：56-61.
[15] Ronnie W，Palmberg J O. Hydraulic transformer in low-speed operation-a study of control strategies[C]// Proceedings of the 5th International Symposium on Fluid Power，Nara，Japan，2002：849-854.
[16] 孟涛. 液压变压器压力与流量输出控制研究[D]. 北京：北京理工大学，2011. MENG Tao. Press and flow output of hydraulic transformer control research[D]. Beijing：Beijing Institute of Technology，2011.
[17] 荆崇波. 旋转斜盘液压变压器特性研究[D]. 北京：北京理工大学，2010. JING Chongbo. Research on characteristics of rotate-plate hydraulic transformer[D]. Beijing：Beijing Institute of Technology，2010.
[18] BAO Qianqian ，ZHOU Junjie，JING Chongbo，et al. Hydro-dynamic model and low-speed stability analysis of hydraulic transformer[J]. IEEE Access，2021，99：61200- 61210.
[19] 刘丽兰，刘宏昭，吴子英，等. 机械系统中摩擦模型的研究进展[J]. 力学进展，2008，38(2)：201-213. LIU Lilan，LIU Hongzhao，WU Ziying，et al. Research progress of friction models in mechanical systems[J]. Advances in Mechanics，2008，38(2)：201-213.
[20] 段书用，李昌洛，韩旭，等. 机械臂动力学分析及关节非线性摩擦模型建立[J]. 机械工程学报，2020，56(9)：18-28. DUAN Shuyong，LI Changluo，HAN Xu，et al. Forward-inverse dynamics analysis of robot arm trajectories and development of a nonlinear friction model for robot joints[J]. Journal of Mechanical Engineering，2020，56(9)：18-28.
[21] 孔祥臻，王勇，蒋守勇. 基于Stribeck模型的摩擦颤振补偿[J]. 机械工程学报，2010，46(5)：68-71. KONG Xiangzhen，WANG Yong，JIANG Shouyong. Friction flutter compensation based on Stribeck model[J]. Journal of Mechanical Engineering，2010，46(5)：68-71.
[22] 温诗铸，黄平. 摩擦学原理[M]. 北京：清华大学出版社，2002. WEN Shizhu，HUANG Ping. Tribology principle[M]. Beijing：Tsinghua University Press，2002.
[23] Hutchings I M. Tribology：Friction and wear of engineering materials[M]. London：CRC Press，1992.
[24] 王远梅. 大深度海水液压柱塞马达容积效率及扭矩特性仿真研究[D]. 武汉：华中科技大学，2016. WANG Yuanmei. A thesis submitted in partial Fulfillment of the requirements[D]. Wuhan：Huazhong University of Science and Technology，2016.
[25] Manring N D. Torque on the cylinder block of an axial-piston swash-plate type hydrostatic pump[D]. Ames：Iowa State University，1996.