Thermo-electric Coupling Modeling and Visual Characterization of Lithium-ion Batteries

doi:10.3901/JME.2025.02.268

Abstract

Abstract: The electrochemical reactions and heat generation mechanism inside lithium ion batteries (LIBs) are complex, which can be influenced by many factors. Precise mathematical modeling and visualization of LIB internal states are of importance for battery management systems. A model based on coupling electrochemical and thermal characteristic is established, in which the characteristics of battery shape and micro-geometry structure are also considered. Moreover, a method is further proposed to obtain model parameters, which combines measurements and data-driven parameter identification. To visualize lithium ion concentration in solid-phase, numerical equations describing the electrochemical reaction are established based on the lithium ion diffusion mechanism, which can explain the coupling effects of temperatures and charging rates on LIB capacity. model validation results show that the prediction error of terminal voltage is less than 50 mV and the estimation error of temperature is less than 2 ℃.

Key words: lithium-ion battery, co-simulation, visual analysis, dismantling measurement, electrochemical-thermal coupling mode

CLC Number:

TM912

XIONG Rui, ZHANG Kaixuan, LI Hailong. Thermo-electric Coupling Modeling and Visual Characterization of Lithium-ion Batteries[J]. Journal of Mechanical Engineering, 2025, 61(2): 268-280.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2025.02.268

http://www.cjmenet.com.cn/EN/Y2025/V61/I2/268

References

[1] 熊瑞. 动力电池管理系统核心算法[M]. 2版. 北京：机械工业出版社，2021. XIONG Rui. Core algorithm of battery management system for EVs[M]. 2nd ed. Beijing：China Machine Press，2021.
[2] YANG Ruixin，XIONG Rui，SHEN Weixiang，et al. Extreme learning machine-based thermal model for lithium-ion batteries of electric vehicles under external short circuit[J]. Engineering，2021，7(3)：395-405.
[3] LIN Jiayuan，LIU Xinhua，LI Shen，et al. A review on recent progress，challenges and perspective of battery thermal management system[J]. International Journal of Heat and Mass Transfer，2021，167：120834.
[4] 熊瑞，李幸港. 基于双卡尔曼滤波算法的动力电池内部温度估计[J]. 机械工程学报，2020，56(14)：146-151. XIONG Rui，LI Xinggang. Battery internal temperature estimation method through double extended Kalman filtering algorithm[J]. Journal of Mechanical Engineering，2020，56(14)：146-151.
[5] MESBAHI T，SUGRANES B，BAKRI R，et al. Coupled electro-thermal modeling of lithium-ion batteries for electric vehicle application[J]. Journal of Energy Storage，2021，35：102260.
[6] GOUTAM S，NIKOLIAN A，JAGUEMONT J，et al. Three-dimensional electro-thermal model of Li-ion pouch cell：Analysis and comparison of cell design factors and model assumptions[J]. Applied thermal engineering，2017，126：796-808.
[7] DENG Jie，BAE C，MARCICKI J，et al. Safety modelling and testing of lithium-ion batteries in electrified vehicles[J]. Nature Energy，2018，3(4)：261-266.
[8] XU Meng，ZHANG Zhuqian，WANG Xia，et al. Two- dimensional electrochemical–thermal coupled modeling of cylindrical LiFePO4 batteries[J]. Journal of power sources，2014，256：233-243.
[9] KUPPER C，BESSLER W G. Multi-scale thermo- electrochemical modeling of performance and aging of a LiFePO4/graphite lithium-ion cell[J]. Journal of The Electrochemical Society，2017，164(2)：A304-A320.
[10] MEI Wenxin，LIANG Chen，SUN Jinhua，et al. Three-dimensional layered electrochemical-thermal model for a lithium-ion pouch cell[J]. International Journal of Energy Research，2020，44(11)：8919-8935.
[11] HE C X，YUE Q L，WU M C，et al. A 3D electrochemical-thermal coupled model for electrochemical and thermal analysis of pouch-type lithium-ion batteries[J]. International Journal of Heat and Mass Transfer，2021，181：121855.
[12] LI Chengshuai，ZHANG Hongya，ZHANG Runjie，et al. On the characteristics analysis and tab design of an 18650 type cylindrical LiFePO4 battery[J]. Applied Thermal Engineering，2021，182：116144.
[13] LI Junfu，WANG Lixin，LYU Chao，et al. New method for parameter estimation of an electrochemical-thermal coupling model for LiCoO₂ battery[J]. Journal of Power Sources，2016，307(1)：220-230.
[14] REHNLUND D，WANG Zhaohui，NYHOLM L. Lithium-diffusion induced capacity losses in lithium-based batteries[J]. Advanced Materials，2022，34(19)：2108827.
[15] DOYLE M，NEWMAN J，FULLER T. Modeling of galvanostatic charge and discharge of the lithium/ polymer/insertion cell[J]. Journal of the Electrochemical Society，1993，140(6)：1526-1533.
[16] VETH C，DRAGICEVIC D，MERTEN C. Thermal characterizations of a large-format lithium ion cell focused on high current discharges[J]. Journal of Power Sources，2014，267：760-769.
[17] BAHIRAEI F，GHALKHANI M，FARTAJ A，et al. A pseudo 3D electrochemical-thermal modeling and analysis of a lithium-ion battery for electric vehicle thermal management applications[J]. Applied Thermal Engineering，2017，125：904-918.
[18] FULLER T，DOYLE M，NEWMAN J. Simulation and optimization of the dual lithium ion insertion cell[J]. Journal of the Electrochemical Society 1994，141(1)：1-10.
[19] 熊瑞，马骕潇，陈泽宇，等. 锂离子电池极速自加热中的电-热耦合特性及建模[J]. 机械工程学报，2021，57(2)：179-189. XIONG Rui，MA Suxiao，CHEN Zeyu，et al. Electrochemical thermal coupling characteristics and modeling for lithium-ion battery operating with extremely self-fast heating[J]. Journal of Mechanical Engineering，2021，57(2)：179-189.
[20] ABADA S，MARLAIR G，LECOCP A，et al. Safety focused modeling of lithium-ion batteries：A review[J]. Journal of Power Sources，2016，306：178-192.
[21] DONG Ti，PENG Peng，JIANG Fangming. Numerical modeling and analysis of the thermal behavior of NCM lithium-ion batteries subjected to very high C-rate discharge/charge operations[J]. International Journal of Heat and Mass Transfer，2018，117：261-272.
[22] VALBΦEN L O，REIMERS J N. Transport properties of LiPF6-based Li-ion battery electrolytes[J]. Journal of The Electrochemical Society，2005，152(5)：A882-A891.
[23] HAN Xuebing，OUYANG Minggao，LU Langlang，et al. Simplification of physics-based electrochemical model for lithium ion battery on electric vehicle. Part II：Pseudo- two-dimensional model simplification and state of charge estimation[J]. Journal of Power Sources，2015，278：814-825.
[24] ZHAO Wei，LUO GANG，WANG Chaoyang. Modeling internal shorting process in large-format Li-ion cells[J]. Journal of The Electrochemical Society，2015，162(7)：A1352-A1364.
[25] 李利淼，吕岩，仝俊利，等. 锂离子电池负极衰减机理的研究进展[J]. 电源技术，2017，41(2)：318-320. LI Limiao，LÜ Yan，TONG Junli，et al. Research progress in anode decay mechanism of lithium ion battery[J]. Chinese Journal of Power Sources，2017，41(2)：318-320.
[26] 马骕骁. 动力电池电触发快速加热机理、建模与优化策略研究[D]. 北京：北京理工大学，2021. MA Suxiao. Research on the mechanism，model and optimization strategy of the electric trigger preheating for battery[D]. Beijing：Beijing Institute of Technology，2021.
[27] 杨淞元，田勇，田劲东. 基于iCEEMDAN和迁移学习的锂离子电池SOH估计[J]. 电气工程学报，2022，17(4)：2-10. YANG Songyuan，TIAN Yong，TIAN Jindong. State of health estimation of lithium-ion batteries based on iCEEMDAN and transfer learning[J]. Journal of Electrical Engineering，2022，17(4)：2-10.
[28] 方德宇，楚潇，刘涛，等. 基于数据-模型驱动的锂离子电池健康状态估计[J]. 电气工程学报，2022，17(4)：20-31. FANG Deyu，CHU Xiao，LIU Tao，et al. Research on health assessment method of lithium-ion battery based on data-model hybrid drive[J]. Journal of Electrical Engineering，2022，17(4)：20-31.
[29] 刘王泽宇，李青，庾甜甜，等. 锂离子电池过放电状态的阻抗特性研究[J]. 电气工程学报，2022，17(4)：51-60. LIU Wangzeyu，LI Qing，YU Tiantian，et al. Study on impedance characteristics of lithium-ion battery in over discharge state[J]. Journal of Electrical Engineering，2022，17(4)：51-60.
[30] RUAN Haijun，JIANG Jiuchun，SUN Bingxiang，et al. A rapid low-temperature internal heating strategy with optimal frequency based on constant polarization voltage for lithium-ion batteries[J]. Applied Energy，2016，177：771-782.
[31] 庞辉. 基于电化学模型的锂离子电池多尺度建模及其简化方法[J]. 物理学报，2017，66(23)：312-322. PANG Hui. Multi-scale modeling and its simplification method of Li-ion battery based on electrochemical model[J]. Acta Physica Sinica，2017，66(23)：312-322.
[32] QU Z，JIANG Z，WANG Q. Experimental study on pulse self-heating of lithium-ion battery at low temperature[J]. International Journal of Heat and Mass Transfer，2019，135：696-705.
[33] CHIEW J，CHIN C S，TOH W D，et al. A pseudo three-dimensional electrochemical-thermal model of a cylindrical LiFePO₄/graphite battery[J]. Applied Thermal Engineering，2019，147：450-463.
[34] WU Peihao，LYU Nawei，SONG Yuhang，et al. Li-ion battery failure warning methods for energy-storage systems[J]. Chinese Journal of Electrical Engineering，2024，10(1)：86-100.
[35] LI Kuijie，LI Yalun，RUI Xinyu，et al. Experimental study on the effect of state of charge on failure propagation characteristics within battery modules[J]. Chinese Journal of Electrical Engineering，2023，9(3)：3-14.
[36] 龚奕畅，朱昱豪，顾鑫，等. 基于多参量的动力电池剩余使用价值定义与评价方法[J]. 电气工程学报，2024，19(1)：117-123. GONG Yichang，ZHU Yuhao，GU Xin，et al. Definition and evaluation method of surplus use value of power battery based on multi-parameters[J]. Journal of Electrical Engineering，2024，19(1)：117-123.
[37] 李雨佳，欧阳权，刘灏仪，等. 基于支持向量机与改进高斯过程混合模型的车用电池容量预测方法[J]. 电气工程学报，2024，19(1)：87-96. LI Yujia，OUYANG Quan，LIU Haoyi，et al. Vehicle battery capacity prediction based on hybrid model of support vector machine and improved Gaussian process[J]. Journal of Electrical Engineering，2024，19(1)：87-96.
[38] AN Zhoujian，JIA Li，WEI Liting，et al. Investigation on lithium-ion battery electrochemical and thermal characteristic based on electrochemical-thermal coupled model[J]. Applied Thermal Engineering，2018，137：792-807.
[39] 王亢亢. 车用三元圆柱锂离子电池电化学-热特性研究[D]. 镇江：江苏大学，2019. WANG Kangkang. Study on electrochemical-thermal characteristics of ternary cylindrical lithium ion batteries for automotive[D]. Zhenjiang：Jiangsu University，2019.