Review on Hot Stamping Process and Equipment of High Strength Steel Sheet

doi:10.3901/JME.2022.20.319

Abstract

Abstract: The hot stamping process of high strength steel sheet is one of important ways to realize lightweight and improve safety of automobile. It has been widely used in automobile industry and is the focus of attention and research for steel, die, equipment, part and automobile manufacturers as well as scholars. The application key points are reviewed in research of traditional hot stamping process from the perspective of actual production in the following aspects: ① the effect of chemical compositions of materials on their properties, the characteristics and application scope of commonly used coatings; ② the application key points of heating, forming, quenching, cutting, surface treatment and connection process; ③ the important factors and the process of numerical simulation; ④ the types and characteristics of heating systems and presses; ⑤ the key points of material selection, design, manufacture and optimization design process of dies. Finally, hot stamping related directions worthy of attention will be discussed.

Key words: high strength steel sheet, hot stamping process, numerical simulation, heating system, press, die

CLC Number:

TG142

XIE Dongxuan, ZHUANG Weimin, WANG Nan, SHI Hongda, WANG Pengyue, LIU Yang, CHEN Yanhong. Review on Hot Stamping Process and Equipment of High Strength Steel Sheet[J]. Journal of Mechanical Engineering, 2022, 58(20): 319-338.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2022.20.319

http://www.cjmenet.com.cn/EN/Y2022/V58/I20/319

References

[1] MERKLEIN M，WIELAND M，LECHNER M，et al. Hot stamping of boron steel sheets with tailored properties:A review[J]. Journal of Materials Processing Technology，2016，228:11-24.
[2] MERKLEIN M，JOHANNES M，LECHNER M，et al. A review on tailored blanks - Production，applications and evaluation[J]. Journal of Materials Processing Technology，2014，214(2):151-164.
[3] KARBASIAN H，TEKKAYA A E. A review on hot stamping[J]. Journal of Materials Processing Technology，2010，210(15):2103-2118.
[4] 张宜生，王子健，王梁. 高强钢热冲压成形工艺及装备进展[J]. 塑性工程学报，2018，25(5):11-23. ZHANG Yisheng，WANG Zijian，WANG Liang. Progress in hot stamping process and equipment for high strength steel sheet[J]. Journal of Plasticity Engineering，2018，25(5):11-23.
[5] 金学军，龚煜，韩先洪，等. 先进热成形汽车钢制造与使用的研究现状与展望[J]. 金属学报，2020，56(4):411-428. JIN Xuejun，GONG Yu，HAN Xianhong，et al. A review of current state and prospect of the manufacturing and application of advanced hot stamping automobile steels[J]. Acta Metallurgica Sinica，2020，56(4):411-428.
[6] BARIANI P F，BRUSCHI S，GHIOTTI A，et al. Testing formability in the hot stamping of HSS[J]. CIRP Annal - Manufacturing Technology，2008，57(1):265-268.
[7] GEIGER M，MERKLEIN M，HOFF C. Basic investigations on the hot stamping steel 22MnB5[J]. Advanced Materials Research，2005，6-8:795-804.
[8] NADERI M. Hot stamping of ultra high strength steels[D]. Aachen:RWTH Aachen University，2007.
[9] MOHRBACHER H. Martensitic automotive steel sheet - fundamentals and metallurgical optimization strategies[J]. Advanced Materials Research，2015，1063:130-142.
[10] TOTTEN G E. Steel heat treatment:metallurgy and technologies[M]. Boca Raton:CRC Press，2006.
[11] AYDIN H，ESSADIQI E，JUNG I H，et al. Development of 3rd generation AHSS with medium Mn content alloying compositions[J]. Materials Science & Engineering A，2013，564(3):501-508.
[12] NADERI M，KETABCHI M，ABBASI M，et al. Analysis of microstructure and mechanical properties of different boron and non-boron alloyed steels after being hot stamped[J]. Procedia Engineering，2011，10(7):460-465.
[13] TATEYAMA S，ISHIO R，HAYASHI K，et al. Microstructures and mechanical properties of V and/or Nb bearing ultrahigh strength hot stamped steel components[J]. Tetsu-to-Hagane，2014，100(9):1114-1122.
[14] GANAPATHY M，LI N，LIN J，et al. A feasibility study on warm forming of an as-quenched 22MnB5 boron steel[J]. International Journal of Lightweight Materials and Manufacture，2020，3(3):277-283.
[15] LEE C W，FAN D W，SOHN I R，et al. Liquid-metal-induced embrittlement of Zn-coated hot stamping steel[J]. Metallurgical and Materials Transactions A，2012，43(13):5122-5127.
[16] GONZALEZ I M，STRAUBE O. Development of zinc coated parts for hot stamping[C]//Proceedings of the New Developments in Sheet Metal Forming Conference，Stuttgart，Germany，2016:265-276.
[17] NASH P，PAN Y Y. The Ni-Zn (Nickel-Zinc) system[J]. Journal of Phase Equilibria，1987，8(5):422.
[18] JHAJJ K S. Heat transfer modeling of roller hearth and muffle furnace[D]. Waterloo:University of Waterloo，2015.
[19] SEPEUR S. The company Nano-X GmbH:products for the automotive industry[C/CD]//Presentated at Deutsche Börse，July 10，2006，Frankfurt，Germany.
[20] TURETTA A，BRUSCHI S，GHIOTTI A. Investigation of 22MnB5 formability in hot stamping operations[J]. Journal of Materials Processing Technology，2006，177(1-3):396-400.
[21] LECHLER J，MERKLEIN M. Hot stamping of ultra strength steels as a key technology for lightweight construction[C]//Materials Science and Technology (MS&T)，Pittsburgh，Pennsylvania，2008:1698-1709.
[22] GÜLER H，ERTAN R，ÖZCAN R. Influence of heat treatment parameters on the microstructure and mechanical properties of boron-alloyed steels[J]. Materials Testing，2012，54(9):619-624.
[23] 贺连芳，赵国群，李辉平，等. 基于响应曲面方法的热冲压硼钢B1500HS淬火工艺参数优化[J]. 机械工程学报，2011，47(8):77-82. HE Lianfang，ZHAO Guoqun，LI Huiping，et al. Optimization of quenching parameters for hot stamping boron steel B1500HS based on response surface methodology[J]. Journal of Mechanical Engineering，2011，47(8):77-82.
[24] MERKLEIN M，LECHLER J，GEIGER M. Characterisation of the flow properties of the quenchenable ultra high strength steel 22MnB5[J]. CIRP Annals - Manufacturing Technology，2006，55(1):229-232.
[25] MERKLEIN M，LECHLER J. Investigation of the thermo-mechanical properties of hot stamping steels[J]. Journal of Materials Processing Technology，2006，177(1-3):452-455.
[26] NADERI M，DURRENBERGER L，MOLINARI A，et al. Constitutive relationships for 22MnB5 boron steel deformed isothermally at high temperatures[J]. Materials Science and Engineering A，2008，478(1-2):130-139.
[27] LI N，SUN C，GUO N，et al. Experimental investigation of boron steel at hot stamping conditions[J]. Journal of Materials Processing Technology，2016，228:2-10.
[28] 林建平，王立影，田浩彬，等. 超高强度钢热流变行为[J]. 塑性工程学报，2009，16(2):180-183. LIN Jianping，WANG Liying，TIAN Haobin，et al. Research on hot forming behavior of ultrahigh strength steel[J]. Journal of Plasticity Engineering，2009，16(2):180-183.
[29] GUI Z X，LIANG W K，ZHANG Y S. Formability of aluminum-silicon coated boron steel in hot stamping process[J]. Transactions of Nonferrous Metals Society of China，2014，24(6):1750-1757.
[30] GEIGER M，MERKLEIN M，LECHLER J. Determination of tribological conditions within hot stamping[J]. Production Engineering，2008，2(3):269-276.
[31] YANAGIDA A，AZUSHIMA A. Evaluation of coefficients of friction in hot stamping by hot flat drawing test[J]. CIRP Annals - Manufacturing Technology，2009，58(1):247-250.
[32] YANAGIDA A，KURIHARA T，AZUSHIMA A. Development of tribo-simulator for hot stamping[J]. Journal of Materials Processing Technology，2010，210(3):456-460.
[33] AZUSHIMA A，UDA K，YANAGIDA A. Friction behavior of aluminum-coated 22MnB5 in hot stamping under dry and lubricated conditions[J]. Journal of Materials Processing Technology，2012，212(5):1014-1021.
[34] GHIOTTI A，BRUSCHI S，BORSETTO F. Tribological characteristics of high strength steel sheets under hot stamping conditions[J]. Journal of Materials Processing Technology，2011，211(11):1694-1700.
[35] TIAN X，ZHANG Y，LI J. Investigation on tribological behavior of advanced high strength steels:influence of hot stamping process parameters[J]. Tribology Letters，2012，45(3):489-495.
[36] HEIN P，WILSIUS J. Status and innovation trends in hot stamping of USIBOR 1 500 P[J]. Steel Research International，2008，79(2):85-91.
[37] MIN J，LIN J，LI J，et al. Investigation on hot forming limits of high strength steel 22MnB5[J]. Computational Materials Science，2010，49(2):326-332.
[38] LI J，MIN J，QIN K，et al. Investigation on the effects of sheet thickness and deformation temperature on the forming limits of boron steel 22MnB5[J]. Key Engineering Materials，2011，474-476:993-997.
[39] SHI D Y，YING L，HU P，et al. Experimental and numerical determination of thermal forming limit diagrams (TFLD) of high strength steel 22MnB5[C]//Proceedings of the 11th International Conference on Numerical Methods in Industrial Forming Processes，Shenyang，China，2013:406-413.
[40] CUI J，SUN G，XU J，et al. A method to evaluate the formability of high-strength steel in hot stamping[J]. Materials and Design，2015，77:95-109.
[41] KRAJCINOVIC D. Damage mechanics:accomplishments，trends and needs[J]. International Journal of Solids and Structures，2000，37(1-2):267-277.
[42] 解东旋. 基于热冲压成形的车身抗撞构件材料性能梯度分布研究[D]. 长春:吉林大学，2017. XIE Dongxuan. Research on the graded material property distribution of autobody crashworthy components based on hot stamping[D]. Changchun:Jilin University，2017.
[43] LIN J，LIU Y，DEAN T A. A review on damage mechanisms，models and calibration methods under various deformation conditions[J]. International Journal of Damage Mechanics，2005，14(4):299-319.
[44] MERKLEIN M，LECHLER J，STOEHR T. Investigations on the thermal behavior of ultra high strength boron manganese steels within hot stamping[J]. International Journal of Material Forming，2009，2(Suppl.1):259-262.
[45] HAY B A，BOUROUGA B，DESSAIN C. Thermal contact resistance estimation at the blank/tool interface:experimental approach to simulate the blank cooling during the hot stamping process[J]. International Journal of Material Forming，2010，3(3):147-163.
[46] 李辉平，贺连芳，赵国群. 硼钢B1500HS界面传热系数与压力关系的研究[J]. 机械工程学报，2013，49(16):77-83. LI Huiping，HE Lianfang，ZHAO Guoqun. Research on the surface heat transfer coefficient depending on surface pressure of boron steel B1500HS[J]. Journal of Mechanical Engineering，2013，49(16):77-83.
[47] ZHANG Z，PENG G，LIU C，et al. Experimental and simulation study for heat transfer coefficient in hot stamping of high-strength boron steel[J]. Metallurgical and Materials Transactions B，2015，46(6):2419-2422.
[48] KIM H K，OH S I. Evaluation of heat transfer coefficient during heat treatment by inverse analysis[J]. Journal of Materials Processing Technology，2001，112(2-3):157-165.
[49] NIKRAVESH M，NADERI M，AKBARI G H，et al. Phase transformations in a simulated hot stamping process of the boron bearing steel[J]. Materials and Design，2015，84:18-24.
[50] NADERI M，SAEED-AKBARI A，BLECK W. The effects of non-isothermal deformation on martensitic transformation in 22MnB5 steel[J]. Materials Science and Engineering A，2008，487(1-2):445-455.
[51] BARCELLONA A，PALMERI D. Effect of plastic hot deformation on the hardness and continuous cooling transformations of 22MnB5 microalloyed boron steel[J]. Metallurgical and Materials Transactions A，2009，40(5):1160-1174.
[52] BARDELCIK A，SALISBURY C P，WINKLER S，et al. Effect of cooling rate on the high strain rate properties of boron steel[J]. International Journal of Impact Engineering，2010，37(6):694-702.
[53] NISHIBATA T，KOJIMA N. Effect of quenching rate on hardness and microstructure of hot-stamped steel[J]. Journal of Alloys and Compounds，2013，577(Suppl.1):S549-S554.
[54] KOLLECK R，VEIT R，MERKLEIN M，et al. Investigation on induction heating for hot stamping of boron alloyed steels[J]. CIRP Annals - Manufacturing Technology，2009，58(1):275-278.
[55] CHOI H S，KIM B M，KIM D H，et al. Application of mechanical trimming to hot stamped 22MnB5 parts for energy saving[J]. International Journal of Precision Engineering and Manufacturing，2014，15(6):1087-1093.
[56] CHOI H S，SHIN J H，HAN J G，et al. The effect of inclined angle and positioning on the sheared edge in mechanical trimming using hot half-trimming of 22MnB5[J]. Advances in Materials and Processing Technologies，2016，2(2):245-251.
[57] LAUMANN T，PICAS I，GRANÉ M，et al. Hard cutting of tailored hardened 22MnB5[C]//IDDRG Conference:Anniversary Conference:Tools & Technologies for the Processing of Ultra High Strength Steels，Graz，Austria，2010:355-362.
[58] HU P，YING L，HE B. Hot stamping advanced manufacturing technology of lightweight car body[M]. Beijing:Science Press，2017.
[59] MALLICK P K. Materials，design and manufacturing for lightweight vehicles[M]. UK:Woodhead Publishing Limited，2010.
[60] KURZ H，GOEDE M. Requirements of sustainable automobile production for future material developments[C/CD]//Presented at Insight Edition Conference，Solihull，UK，2014.
[61] MESCHUT G，JANZEN V，OLFERMANN T. Innovative and highly productive joining technologies for multi-material lightweight car body structures[J]. Journal of Materials Engineering and Performance，2014，23(5):1515-1523.
[62] MESCHUT G，MATZKE M，HOERHOLD R，et al. Hybrid technologies for joining ultra-high-strength boron steels with aluminum alloys for lightweight car body structures[J]. Procedia CIRP，2014，23:19-23.
[63] LING Z，LI Y，LUO Z，et al. Resistance element welding of 6061 aluminum alloy to uncoated 22MnMoB boron steel[J]. Materials and Manufacturing Processes，2016，31(16):2174-2180.
[64] ALBER U. Friction element welding - innovations for hybrid body parts[C/CD]//Presented at Joining in Car Body Engineering，Bad Nauheim，Germany，2012.
[65] 李永兵，马运五，楼铭，等. 轻量化多材料汽车车身连接技术进展[J]. 机械工程学报，2016，52(24):1-23. LI Yongbing，MA Yunwu，LOU Ming，et al. Advances in welding and joining processes of multi-material lightweight car body[J]. Journal of Mechanical Engineering，2016，52(24):1-23.
[66] ÅKERSTRÖM P. Modeling and simulation of hot stamping[D]. Sweden:Luleå University of Technology，2006.
[67] SHAPIRO A. Finite element modeling of hot stamping[J]. Steel Research International，2010，80(9):658-664.
[68] BILLUR E. Hot stamping of ultra high-strength steels:From a technological and business perspective[M]. Switzerland:Springer International Publishing，2019.
[69] ZHOU J，MU Y，WANG B. A damage-coupled unified viscoplastic constitutive model for prediction of forming limits of 22MnB5 at high temperatures[J]. International Journal of Mechanical Sciences，2017，133:457-468.
[70] ÅKERSTRÖM P，BERGMAN G，OLDENBURG M. Numerical implementation of a constitutive model for simulation of hot stamping[J]. Modelling and Simulation in Materials Science and Engineering，2007，15(2):105-119.
[71] ÅKERSTRÖM P，OLDENBURG M. Austenite decomposition during press hardening of a boron steel-computer simulation and test[J]. Journal of Materials Processing Technology，2006，174(1-3):399-406.
[72] BOK H H，LEE M G，PAVLINA E J，et al. Comparative study of the prediction of microstructure and mechanical properties for a hot-stamped B-pillar reinforcing part[J]. International Journal of Mechanical Sciences，2011，53(9):744-752.
[73] BOK H H，KIM S N，SUH D W，et al. Non-isothermal kinetics model to predict accurate phase transformation and hardness of 22MnB5 boron steel[J]. Materials Science and Engineering A，2015，626:67-73.
[74] HEIN P. A global approach of the finite element simulation of hot stamping[J]. Advanced Materials Research，2005，6:763-770.
[75] LEHMANN H. Developments in the field of schwartz heat treatment furnaces for press hardening industry[C]//Proceedings of the 3rd International Conference on Hot Sheet Metal Forming of High Performance Steel，Kassel，Germany，2011:171-179.
[76] LEHMANN H. Furnaces for press hardening[C/CD]// Presented at AP&T Press Hardening，Next Step Seminar，March 24，2010，Shanghai，China.
[77] BEHRENS B A，HÜBNER S. Conductive heating in press-hardening process[C/CD]//Presented at Doors and Closures in Car Body Engineering，November 16-17，2011，BadNauheim，Germany.
[78] HOLZWEISSIG M J，LACKMANN J，KONRAD S，et al. Influence of short austenitization treatments on the mechanical properties of low-alloy steels for hot forming applications[J]. Metallurgical & Materials Transactions A，2015，46(7):3199-3207.
[79] LOVREC D，KASTREVC M，ULAGA S. Electro-hydraulic load sensing with a speed-controlled hydraulic supply system on forming-machines[J]. International Journal of Advanced Manufacturing Technology，2009，41:1066-1075.
[80] KONNERTH U. A hydraulic high-speed tryout press for the simulation of mechanical forming processes[J]. Journal of Materials Processing Technology，2001，111:159-163.
[81] AKERS A，GASSMAN M，SMITH R J. Hydraulic power system analysis[M]. Boca Raton:CRC Press，2006.
[82] HUND R，BRAUN M. Continuous improvement of hot forming technology[C]//Proceedings of the 3rd International Conference on Hot Sheet Metal Forming of High Performance Steel，Kassel，Germany，2011:189-200.
[83] MAKI T，AMINO M，HIRANO K，et al. Mechanical link servo press for hot forming[C]//Proceedings of the 5th International Conference on Hot Sheet Metal Forming of High Performance Steel，Toronto，Canada，2015:179-187.
[84] LANDGREBE D，RAUTENSTRAUCH A，KUNKE A，et al. The effect of cushion-ram pulsation on hot stamping[C/CD]//Proceedings of the 19th International ESAFORM Conference on Material Forming，April 27-29，2016，Nantes，France.
[85] SJÖSTRÖM J，BERGSTRÖM J. Thermal fatigue testing of chromium martensitic hot-work tool steel after different austenitizing treatments[J]. Journal of Materials Processing Technology，2004，153-154(1):1089-1096.
[86] GHIOTTI A，SGARABOTTO F，BRUSCHI S. A novel approach to wear testing in hot stamping of high strength boron steel sheets[J]. Wear，2013，302(1-2):1319-1326.
[87] 王春涛，白植雄，贾永闯，等. 热冲压模具钢发展现状与趋势[J]. 模具制造，2017(9):93-97. WANG Chuntao，BAI Zhixiong，JIA Yongchuang，et al. Development status and trend of hot stamping die steels[J]. Die & Mould Manufacture，2017(9):93-97.
[88] HOFFMANN H，SO H，STEINBEISS H. Design of hot stamping tools with cooling system[J]. CIRP Annals - Manufacturing Technology，2007，56(1):269-272.
[89] SCHIECK F，HOCHMUTH C，POLSTER S，et al. Modern tool design for component grading incorporating simulation models，efficient tool cooling concepts and tool coating systems[J]. CIRP Journal of Manufacturing Science & Technology，2011，4(2):189-199.
[90] LIU H，LEI C，XING Z. Cooling system of hot stamping of quenchable steel BR1500HS:optimization and manufacturing methods[J]. International Journal of Advanced Manufacturing Technology，2013，69(1-4):211-223.
[91] KIM H. Prediction and elimination of galling in forming galvanized advanced high strength steels[M]. Columbus:Ohio State University，2008.
[92] GALI O A，SHAFIEI M，HUNTER J A，et al. The tribological behavior of PVD coated work roll surfaces during rolling of aluminum[J]. Surface and Coatings Technology，2014，260:230-238.
[93] PUJANTE J，VILASECA M，CASELLAS D，et al. High temperature scratch testing of hard PVD coatings deposited on surface treated tool steel[J]. Surface & Coatings Technology，2014，254:352-357.
[94] SALAS O，OSEGUERA J，GARCÍA N，et al. Nitriding of an H13 die steel in a dual plasma reactor[J]. Journal of Materials Engineering & Performance，2001，10(6):649-655.