RESEARCH ON MINIATURIZED EDM DEVICE WITH DIFFERENTIAL RECIPROCATING ELECTRODE DRIVING METHOD

Abstract

Abstract: In view of the characteristics of electrical discharge machining (EDM) and ultrasonic motors, an DEM device with differential reciprocating driving method for the electrode, which is based on dual linear stepping ultrasonic motors, is presented. The driving principle of the device is analyzed. Differential reciprocating driving method for the electrode is described. Jump-like movement of the electrode is realized. The dimension of the mechanism is 45mm × 20mm × 40mm. Machining test verifies that the new device is suitable for small hole EDM drilling.

Key words: Differential, Electrical discharge machining, Ultrasonic motor

CLC Number:

TG661

Zhao Wansheng;Liu Weidong;Wang Zhenling;Di Shichun;Meng qingguo. RESEARCH ON MINIATURIZED EDM DEVICE WITH DIFFERENTIAL RECIPROCATING ELECTRODE DRIVING METHOD[J]. , 2000, 36(9): 65-68.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2000/V36/I9/65

[1]	WANG Kang, ZHUANG Weichao, QIU Zhaoyu, LI Bingbing, CHENG Kun, WANG Yanlin, YIN Guodong. Research on the Dynamic Mechanism and Non-cooperative Game Control Strategy for Compass Steering of Distributed Drive Electric Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(8): 259-271.
[2]	AN Haitao, JIA Botao, WANG Liang, WU Jintao, PAN Song, ZHAO Gai. Dynamics Simulation Analysis and Extreme Environment Test Research of Space Hollow-type Ultrasonic Motor [J]. Journal of Mechanical Engineering, 2026, 62(7): 269-283.
[3]	LI Taotao, LING Liang, LIU Jianxin. Research on Control Strategy of Differential Active Steering Control of Independent Rotating Wheels [J]. Journal of Mechanical Engineering, 2026, 62(2): 301-312.
[4]	ZHAO Yijin, YANG Xiaodong, DUAN Xiaoming. High Quality and Efficient Micro-hole Machining of CFRP by EDM Using a Spiral Electrode [J]. Journal of Mechanical Engineering, 2025, 61(7): 220-228.
[5]	GUO Jing, WANG Liming, QI Jin, HU Jie, KONG Lin. Modeling and Optimization Decision of Green Design Scheme of Product Integrating Scenario [J]. Journal of Mechanical Engineering, 2025, 61(3): 40-51.
[6]	ZHANG Ying, LI Shanshan, SHAN Deke, SHI Yuan, BAI Bofeng. Online Measurement of Gas and Liquid Two-phase Flow Rates in Wet Gas Based on Dimensionless Pressure Loss Coefficient [J]. Journal of Mechanical Engineering, 2025, 61(20): 174-181.
[7]	YIN Wenliang, WANG Yue, LIU Lin, ZHANG Wenhua, WANG Ziwei, RUI Xiaoming. Operation Characteristics and Experimental Investigation of Wind Turbine with the Self-stabilizing Speed Regulating Differential Mechanism [J]. Journal of Mechanical Engineering, 2025, 61(2): 321-329.
[8]	WEN Shikun, JI Aihong, LEE Heow Pueh, CHE Linxian, YANG Zhikang. Improvement of Differential Evolution Algorithm for Solving the Multi-root in Forward Kinematic Equations of Parallel Mechanisms [J]. Journal of Mechanical Engineering, 2025, 61(19): 43-53.
[9]	WANG Jin, LI Xiaodong, GUO Jianmei, HE Hu, JIA Zhixin. Research on the Distribution Mechanism and Law of Discharge Points in EDM of Deep Narrow Slot [J]. Journal of Mechanical Engineering, 2025, 61(13): 386-396.
[10]	QIU Wenzhe, ZHANG Zhen, WANG Peng, LIU Denghua, WEI Shichuan, ZHANG Guojun. Regulation of Thermal Deformation Behavior in Wire EDM Process Based on Underwater Laser-induced Shockwave [J]. Journal of Mechanical Engineering, 2024, 60(9): 273-285.
[11]	LIU Zhanguang, ZHANG Yun, LIU Qingyu. Modeling for CNC Machine Tool Thermal Error Based on DF-LSTM [J]. Journal of Mechanical Engineering, 2024, 60(7): 249-257.
[12]	ZHAO Zhiyuan, YANG Xiaohang, XU Zichun, LI Yuntao, TANG Jiawen, ZHAO Jingdong. Kinematic Singularity Analysis of a Novel SSRMS-type Reconfigurable Space Manipulator [J]. Journal of Mechanical Engineering, 2024, 60(5): 19-35.
[13]	WANG Bo, ZHAO Xingyu, QUAN Long, ZHAO Bin, LI Yunwei, HAO Yunxiao. Variable Gain Flow-control Principle Based on Active Differential Pressure Regulation [J]. Journal of Mechanical Engineering, 2024, 60(4): 134-142.
[14]	GAO Qiang, LI Linfei, ZHU Yuchuan. Hybrid Coding Control of Electro-hydraulic Pressure Servo System Using Array Digital Valves [J]. Journal of Mechanical Engineering, 2024, 60(4): 143-154.
[15]	PAN Xin, ZHANG Xin, LU Jiaqiao, WU Haiqi. Design and Experimental Study of a Rotor Unbalanced Self-recovery Actuator Based on Accurate and Stable Regulation of Ultrasonic Motors [J]. Journal of Mechanical Engineering, 2024, 60(4): 449-457.

RESEARCH ON MINIATURIZED EDM DEVICE WITH DIFFERENTIAL RECIPROCATING ELECTRODE DRIVING METHOD

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments