The Research of Geometric Error Modeling of Robotic Machining: II Parameter Identification and Pose Optimization

doi:10.3901/JME.2021.07.169

Abstract

Abstract: According to the built spatial motion chain, the geometric error of robotic machining is not only related to the pose parameter identification errors of hand-eye/workpiece/tool, but the joint kinematic error and weak stiffness deformation of robot. This paper investigates the new methods of hand-eye pose parameter identification considering the joint kinematic error, the workpiece pose parameter identification considering the onsite measuring defects and the tool pose parameter identification based on the error evaluation of practical machined surface, and deals with the problem that the pose parameter identification accuracy is limited by various factors such as robot motion accuracy, unclosed/uneven/noisy measured points and machined jitter/stress deformation/rotation error. Then consider the joint kinematics error, weak rigidity deformation and error compensation, a general model of machining error compensation and robotic pose optimization is built, and can be applied to kinds of machining error control such as normal depth(grinding/milling), tangential slip(drilling) and angle incline (trimming). Finally, the experiments of hand-eye/workpiece/tool pose parameter identification, overall error compensation and robotic machining are carried out to verify the effectiveness of the proposed methods.

Key words: robotic machining, pose parameter identification, overall error control, robotic pose optimization

CLC Number:

TH161

LI Wenlong, XIE He, YIN Zhouping, DING Han. The Research of Geometric Error Modeling of Robotic Machining: II Parameter Identification and Pose Optimization[J]. Journal of Mechanical Engineering, 2021, 57(7): 169-184.

References

[1] HU J S,CHANG Y J. Automatic calibration of hand-eye-workspace and camera using hand-mounted line laser[J]. IEEE/ASME Transactions on Mechatronics,2013,18(6):1778-1786.
[2] CHEN W Y,DU J,XIONG W,et al. A noise-tolerant algorithm for robot-sensor calibration using a planar disk of arbitrary 3D orientation[J]. IEEE Transactions on Automation Science and Engineering,2018,15(1):251-263.
[3] LI J F,ZHU J H,GUO Y K,et al. Calibration of a portable laser 3-D scanner used by a robot and its use in measurement[J]. Optical Engineering,2008,47(1):1-8.
[4] BESL P J,MCKAY N. Method for registration of 3D shapes[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence,1992,14(2):239-256.
[5] POTTMANN H,HUANG Q X,YANG Y L,et al. Geometry and convergence analysis of algorithms for registration of 3D shapes[J]. International Journal of Computer Vision,2006,67(3):277-296.
[6] LI W L,YIN Z P,HUANG Y A,et al. Three-dimensional point-based shape registration algorithm based on adaptive distance function[J]. IET Computer Vision,2011,5(1):68-76.
[7] WANG W,YUN C,SUN K. An experimental method to calibrate the robotic grinding tool[C]//IEEE International Conference on Automation and Logistics,Qingdao,2008:2460-2465.
[8] SUN Y Q,GIBLIN D J,KAZEROUNIAN K. Accurate robotic belt grinding of workpieces with complex geometries using relative calibration techniques[J]. Robotics and Computer-Integrated Manufacturing,2009,25(1):204-210.
[9] LI W L,XIE H,ZHANG G,et al. Hand-eye calibration in visually-guided robot grinding[J]. IEEE Transactions on Cybernetics,2016,46(11):2634-2642
[10] 熊有伦,李文龙,陈文斌,等. 机器人学:建模、控制与视觉[M]. 武汉:华中科技大学出版社,2018. XIONG Youlun,LI Wenlong,CHEN Wenbin,et al. Robotics:modeling,control and vision[M]. Wuhan:Huazhong University of Science and Technology Press,2018.
[11] XIE H,PANG C T,LI W L, et al. Hand-eye calibration and its accuracy analysis in robotic grinding[C]//IEEE International Conference on Automation Science and Engineering,Sweden,2015:862-867.
[12] 李文龙,谢核,尹周平,等. 基于方差最小化原理的三维匹配数学建模与误差分析[J]. 机械工程学报,2017,53(16):190-198. LI Wenlong,XIE He,YIN Zhouping,et al. Mathematical modeling and error analysis of 3D matching based on variance minimization principle[J]. Journal of Mechanical Engineering,2013,49(2):20-27.
[13] XIE H,LI W L,YIN Z P,et al. Variance-minimization iterative matching method for free-form surface[J]. IEEE Transactions on Automation Science and Engineering,2019,16(3),1181-1204.
[14] CARDOU P,BOUCHARD S,GOSSELIN C. Kinematic-sensitivity indices for dimensionally nonhomogeneous Jacobian matrices[J]. IEEE Transactions on Robotics,2010,26(1):166-173.