PERFORMANCE ANALYSIS OF PURE ELECTRIC VEHICLE WITH ULTRA-CAPACITORS

Abstract

Abstract: A model of pure electric vehicle (PEV) with the ultra-capacitors, based on the software of MATLAB/Simulink, is introduced firstly. The precision of the model is acceptable by comparison with the simulation results and the actual data under the CYC_CONST_45. The work flow of the multi-source electric vehicle is olso presented laconically. The result of PEV dynamical performance, economic performance, including even speed, mutative speed, accelerating/decelerating is analyzed. The performance analysis shows that ultra-capacitors can make the performance of PEV better, protect the battery stack and prolong the distance of PEV.

Key words: Performance analysis, Pure electric vehicle (PEV), Simulation, Ultra-capacitors

CLC Number:

U469

Wang Zhifu;Chen Wei;Ye Huiping;Shi Jianjun. PERFORMANCE ANALYSIS OF PURE ELECTRIC VEHICLE WITH ULTRA-CAPACITORS[J]. , 2005, 41(12): 82-86.

[1]	WU Jie, DANG Jiaqiang, LI Yugang, CHEN Dong, AN Qinglong, WANG Haowei, CHEN Ming. Study on Strengthening Mechanism and Anti-fatigue Performance of Stress Ultrasonic Rolling [J]. Journal of Mechanical Engineering, 2024, 60(9): 127-136.
[2]	YANG Weifeng, LIU Jianhua, Lü Naijing, MA Jiangtao. Method of Cable Dynamic Simulation Based on PBD [J]. Journal of Mechanical Engineering, 2024, 60(6): 21-31,57.
[3]	CHAI Yiyang, ZHANG Lele, DOU Weiyuan, ZHANG Haifeng. Parallel NSGA-III Based Multi-objective Optimization for Side Wall Section Size of High-speed Train Car-body [J]. Journal of Mechanical Engineering, 2024, 60(6): 321-333.
[4]	HUA Dongpeng, ZHOU Qing, WANG Wan, LI Shuo, WANG Zhijun, WANG Haifeng. A Molecular Dynamics Simulation on the Subsurface Damage Mechanism in the Nano-polishing Process of Silicon Carbide [J]. Journal of Mechanical Engineering, 2024, 60(5): 231-240.
[5]	JIA Kang, WANG Hao, REN Dongxu, HONG Jun. An Installation Model and Interference-free Design Method for Cylindrical Power Skiving Tools [J]. Journal of Mechanical Engineering, 2024, 60(5): 352-361.
[6]	ZHAO Chuanjun, WANG Jipeng, XU Lizhong. Research on Accuracy and Localization Characterization of Pulse Electrochemical Micromachining Based on Equivalent Physical Model [J]. Journal of Mechanical Engineering, 2024, 60(5): 378-389.
[7]	HU Long, LIU Hongyan, CHENG Huimei, CHEN Weiqi, FENG Guangjie, YE Yanhong, DENG Dean. Study on Residual Stress of Multi-layer and Multi-pass Butt-welded Joint for Ultra-high Strength Wear-resistant Steel NM500 [J]. Journal of Mechanical Engineering, 2024, 60(4): 335-344.
[8]	LI Ying, ZHANG Jiafang, ZHANG Zhaoyong, WANG Xincheng, ZHANG Jin, KONG Xiangdong. Design of Minimum Diameter of Piston Neck in Swashplate Axial Piston Pump [J]. Journal of Mechanical Engineering, 2024, 60(4): 430-437.
[9]	JI Jiaxin, PENG Cheng, XIANG Chong, HUANG Le, GUO Fei. A Method for Predicting the Wear Life of the Step Seal Considering Variable Speed Conditions [J]. Journal of Mechanical Engineering, 2024, 60(3): 191-202.
[10]	ONG Jun, TANG Qian, LUO Zhichao, FENG Qixiang, NIE Yunfei, REN Zhihao. Mesoscopic Numerical Simulation during Selective Laser Melting of Maraging Steel [J]. Journal of Mechanical Engineering, 2024, 60(3): 282-295.
[11]	SHI Yilei, QUAN Yinzhu, XU Haiying, WANG Zhuang, MA Wenlong, PENG Yong. Factors Analysis on the Electron Beam Waist Position of Gas Discharger Electron Beam Gun of Coaxial Beam Wire [J]. Journal of Mechanical Engineering, 2024, 60(3): 328-336.
[12]	ZONG Chaoyong, LI Qingye, PENG Yue, YANG Guanghong, ZHOU Weihao, XIAO Jian, SONG Xueguan. Dynamic Modeling and Analysis of the Main Steam Relief Isolation Valve (MSRIV) Used in Nuclear Power Plants [J]. Journal of Mechanical Engineering, 2024, 60(20): 339-350.
[13]	HU Chengliang, MIAO Hongliang, ZENG Fan, ZHAO Zhen, TANG Minjun, TANG Xiaofeng. Prediction Model of Magnetic Induction Strength of Soft Magnetic Materials under Hot Forming Conditions [J]. Journal of Mechanical Engineering, 2024, 60(2): 132-139,149.
[14]	FAN Ding, LI Dequan, HOU Yingjie, HUANG Jiankang, FENG Yi. Numerical Analysis of the Coupled Arc-weld Pool Behaviors in GMAW Buried-arc Welding [J]. Journal of Mechanical Engineering, 2024, 60(2): 159-167.
[15]	WANG Gang, GU Zhengwei, YU Ge, LI Xin. Plastic Flow Behavior and Constitutive Model of 7075-H18 Aluminum Alloy Sheet Based on Hot Forming Process [J]. Journal of Mechanical Engineering, 2024, 60(2): 188-196.

PERFORMANCE ANALYSIS OF PURE ELECTRIC VEHICLE WITH ULTRA-CAPACITORS

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments