A METHOD FOR DECREASING ALIGNMENT ERROR OF COORDINATOR MEASUREMENT MACHINE

›› 1997, Vol. 33 ›› Issue (6): 38-42.

• Article • Previous Articles Next Articles

A METHOD FOR DECREASING ALIGNMENT ERROR OF COORDINATOR MEASUREMENT MACHINE

Gao Guojun Chen Kangning Ling Zhihang Che Ada

Xi'an Jiaotong University

Published:1997-11-01

Abstract

CLC Number:

TP391

Gao Guojun Chen Kangning Ling Zhihang Che Ada. A METHOD FOR DECREASING ALIGNMENT ERROR OF COORDINATOR MEASUREMENT MACHINE[J]. , 1997, 33(6): 38-42.

[1]	ZHOU Kaihong, TANG Jinyuan. Tool Position and Orientation Global Optimization Intrinsic Geometry of Strip-width-maximization Manufacture Technology for Sculptured Surface [J]. Journal of Mechanical Engineering, 2020, 56(11): 192-201.
[2]	GUO Minglong, WEI Zhaocheng, WANG Minjie, LI Shiquan, LIU Shengxian. Force Prediction Model for Five-axis Flat End Milling of Sculptured Surface [J]. Journal of Mechanical Engineering, 2019, 55(7): 225-233.
[3]	WU Baohai, LIANG Mancang, ZHANG Ying, LUO Ming. Tool Selection of Multi-axis Machining for Channel Parts with Sculptured Surface [J]. Journal of Mechanical Engineering, 2018, 54(3): 117-124.
[4]	WU Shi, YANG Lin, LIU Xianli, ZHENG Minli, LI Rongyi, WANG Guangyue. Influence of Curvature Characteristics of Sculptured Surface on Milling Force in Ball-end Milling of Panel Moulds [J]. Journal of Mechanical Engineering, 2017, 53(13): 188-198.
[5]	WEI Zhaocheng, WANG Minjie, WANG Xuewen, ZHAO Danyang. A Semi-analytical Cutter Workpiece Engagement Model for Ball End Milling of Sculptured Surface [J]. Journal of Mechanical Engineering, 2017, 53(1): 198-205.
[6]	XU Rufeng, CHEN Zhitong, MENG Fanjun, ZHANG Yun, WU Xianzhen. Tool Orientation Optimization Method Based on Kinematics Constraints of the Machine Tool in Multi-axis Machining with a Ball-end Cutter [J]. Journal of Mechanical Engineering, 2015, 51(23): 160-167.
[7]	FAN Wengang, YE Peiqing. Research Progress in Tool Path Planning for Five-axis End Milling Machining of Sculptured Surfaces [J]. Journal of Mechanical Engineering, 2015, 51(15): 168-182.
[8]	FAN Wengang;LI Jianyong;CAI Yonglin. Rotary Contact Tool Positioning Algorithm for Five-axis NC Machining with the Toroidal Cutter [J]. , 2011, 47(19): 187-192.
[9]	WU Baohai;LUO Ming;ZHANG Ying;LI Shan;ZHANG Dinghua. Advances in Tool Path Planning Techniques for 5-axis Machining of Sculptured Surfaces [J]. , 2008, 44(10): 9-18.
[10]	Wang Yu;Xu Heguo;Gao Chonghui;Huang Jianzhong. METHODOLOGY FOR TOOL COMBINATION OPTIMIZATION OF DIE/ MOLD CAVITY ROUGH MACHINING WITH SCULPTURED SURFACES AND ISLANDS [J]. , 2004, 40(12): 150-154.
[11]	Ma Yulin;Fu Yili;Sun Hongwei. ANALYSIS AND PREDICTION OF MACHINING ERROR IN VIRTUAL MANUFACTURING PROCESS [J]. , 2002, 38(11): 139-142.
[12]	Chen Tao;Zhong Yifang;Zhou Ji. ALGORITHM OF CUTTER LOCATION PATH GENERATION FOR FIVE-AXIS NC MACHINING OF SCULPTURED SURFACES [J]. , 2001, 37(12): 100-103.
[13]	Zhang Ruiqian;Shen Bing;Wang Xiaochun;Wu Xutang. MACHINING SCULPTURED SURFACES BY SECOND ORDER CURVATURE CATERING [J]. , 1998, 34(2): 87-92.
[14]	Duan Zhengcheng;Yu Daoyuan;Den Jianchun;Sun Hongdao;Li Peigen;Ha Hongwen. NEW METHOD OF GENERATING NC MACHINING PATH ON SCULPTURED SURFACES FOR NON-SPHERICAL CUTTERS [J]. , 1994, 30(6): 21-27.

A METHOD FOR DECREASING ALIGNMENT ERROR OF COORDINATOR MEASUREMENT MACHINE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 14

Recommended Articles

Metrics

Comments