RESEARCH ON THE DEVELOPMENT OF A VIRTUAL PRECISION MACHINING SYSTEM

›› 2001, Vol. 37 ›› Issue (6): 66-71.

• Article • Previous Articles Next Articles

RESEARCH ON THE DEVELOPMENT OF A VIRTUAL PRECISION MACHINING SYSTEM

Li Wingbun;Li Jianguang;Zhang Zhihui

Department of Manufacturing Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon

Published:2001-06-15

Abstract

Abstract: The architecture of a virtual precision machining system is designed and built. Its core issues, such as modeling and simulation are highlighted. An application of the system to the machining and testing of an aspheric mould insert is described.

Key words: Modeling, Precision machining, Virtual machining, high-frequency vibration, polygonal wear, train/track coupling dynamics model, wheel/rail contact force, high-speed train

CLC Number:

TH165

Li Wingbun;Li Jianguang;Zhang Zhihui. RESEARCH ON THE DEVELOPMENT OF A VIRTUAL PRECISION MACHINING SYSTEM[J]. , 2001, 37(6): 66-71.

[1]	HAN Jianchao, ZHANG Mengfei, WANG Bin, GUO Shenghui, JIA Yi, WANG Tao. Analysis of Electroplastic Constitutive Equation and Multi-physical Field Coupling of Titanium Alloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 421-433.
[2]	XIE Chenyang, HUANG Jiao, XIAO Guangming, ZHANG Xianjie, WANG Junbiao, LI Yujun. A Algorithm to Generate Representative Volume Elements for Unidirectional Composites Considering Fiber Misalignment [J]. Journal of Mechanical Engineering, 2024, 60(8): 186-195.
[3]	ZHENG Yang, ZHAO Zihao, LIU Wei, YU Zhengzhe, NIU Wei, LEI Yiwen, SUN Ronglu. Research Progress in High-performance Mg Alloys Prepared by Additive Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(7): 385-400.
[4]	ZHANG Jun, WU Chengyang, FANG Hanliang, SUN Zaichao, WANG Kailong, TANG Tengfei. Investigation on Driving Characteristics of a Z4 Redundantly Actuated Parallel Manipulator [J]. Journal of Mechanical Engineering, 2024, 60(7): 66-78.
[5]	SHANG Deyong, HUANG Xinyi, HUANG Yunshan, ZHANG Tianyou. Research on Rigid-flexible Coupling Dynamics of Delta Parallel Robot Based on Kane Equation [J]. Journal of Mechanical Engineering, 2024, 60(7): 124-133.
[6]	DAI Minghua, HU Ping, YING Liang, CHEN Shuai, WANG Yongqing, HAN Xiaoqiang. Modeling Study on Failure Behavior of Quenched Hot Forming Boron Steel Considering Damage [J]. Journal of Mechanical Engineering, 2024, 60(6): 218-226.
[7]	CHAI Yiyang, ZHANG Lele, DOU Weiyuan, ZHANG Haifeng. Parallel NSGA-III Based Multi-objective Optimization for Side Wall Section Size of High-speed Train Car-body [J]. Journal of Mechanical Engineering, 2024, 60(6): 321-333.
[8]	ZHOU Suxia, BA Xinyue, WANG Junyan, LI Guang, QU Zhi. Research on Heat Dissipation of Bionic Brake Disc of Ginkgo Leaf Veins for High-speed Trains [J]. Journal of Mechanical Engineering, 2024, 60(6): 354-362.
[9]	XIANG Zaiyu, MO Jiliang, HE Deqiang, ZHU Song, ZHAI Caizhou, DU Liqing. Friction-induced Vibration and Noise Reduction of High-speed Train Braking via a Sandwich Damping [J]. Journal of Mechanical Engineering, 2024, 60(5): 196-208.
[10]	LIU Daxin, WANG Ke, LIU Zhenyu, XU Jiatong, TAN Jianrong. Research on Digital Twin Modeling Method for Robotic Assembly Cell Based on Data Fusion and Knowledge Reasoning [J]. Journal of Mechanical Engineering, 2024, 60(5): 36-50.
[11]	LI Ziqing, CUI Zhangcai, BIAN Subiao, LI Huihui, LU Jing, ORIOL Arteaga, XU Xipeng. Non-destructive Measurement and Characterization of Damage Layer of Single-crystal Diamond Substrate after Ultra-precision Machining [J]. Journal of Mechanical Engineering, 2024, 60(4): 239-249.
[12]	WU Yue, HU Xiaoyi, WANG Jianuo, JIN Xuesong, CHENG Di, XIAO Xinbiao, HOU Maorui. Research on Mechanism of Polygonal Wear of High-speed Wheel Based on Full-size Wheel-rail Roller Test Rig [J]. Journal of Mechanical Engineering, 2024, 60(20): 229-239.
[13]	ZONG Chaoyong, LI Qingye, PENG Yue, YANG Guanghong, ZHOU Weihao, XIAO Jian, SONG Xueguan. Dynamic Modeling and Analysis of the Main Steam Relief Isolation Valve (MSRIV) Used in Nuclear Power Plants [J]. Journal of Mechanical Engineering, 2024, 60(20): 339-350.
[14]	QIAN Ping, LIU Xinyu, CHEN Wenhua, WANG Zhe, GUO Mingda. Storage Reliability Modeling of Polyurethane Seals for Electrical Connectors [J]. Journal of Mechanical Engineering, 2024, 60(20): 361-371.
[15]	HE Dongping, JIANG Li, XU Huidong, LIU Yuanming, WANG Tao. Horizontal Nonlinear Vibration of Mill Work Roll and Intelligent Liner Vibration Absorption [J]. Journal of Mechanical Engineering, 2024, 60(20): 108-119.

RESEARCH ON THE DEVELOPMENT OF A VIRTUAL PRECISION MACHINING SYSTEM

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments