NC-BASED METHOD TO REDUCE ERROR CAUSED BY ELECTRODE ORBIT IN EDM

Abstract

Abstract: There is machining error in electrical discharge mac- hining (EDM) due to the electrode’s orbiting. The NC (Numerical controf)-based method is proposed to eliminate the error, by modifying the NC codes of electrode 3D model according to the orbit pattern and orbit radius in EDM. Based on the method, a software system is built to process NC codes. Prior to the electrode machining, this software system processes the NC codes which is used to machine electrode and outputs the new NC codes which has the same format with the old one and can be used to machine electrode. Several experiments are made to test this method, and show that the NC-based method can effectively improve machining precision in EDM.

Key words: Electrical discharge machining (EDM), Electrode, Numerical control (NC), Obit, Aerodynamic drag, Bogie, Flow field structure, Aerodynamic performance

CLC Number:

TH164

Shan Yan;Xie Longhan. NC-BASED METHOD TO REDUCE ERROR CAUSED BY ELECTRODE ORBIT IN EDM[J]. , 2005, 41(3): 189-192.

[1]	ZOU Xiaolong, YANG Guangxue, ZHANG Bo, LI Guoshun, ZHANG Yichao, CHEN Can, ZHANG Shujun. Study on Dynamic Stress Characteristics of Bogie Frame of High-speed EMU [J]. Journal of Mechanical Engineering, 2024, 60(8): 212-223.
[2]	LIAO Guiwen, ZHANG Yi, WEI Kai, LIU Xiaojun, WANG Wei. Coupling Characteristics of Liquid-solid Two-phase Flow Field Structure and Particle Motion Behavior at Restricted Lubrication Interface [J]. Journal of Mechanical Engineering, 2024, 60(20): 351-360.
[3]	HOU Jiaqi, ZHANG Guangming, YU Zhihao, LI Yin, MA Lingxuan, HAN Zhifeng, SHI Kai, GUO Chenxu, LAN Hongbo. Method and Laws of High-efficient Micro-scale 3D Printing with Multi-nozzle Driven by Electric Field of Flat Plate Electrodes [J]. Journal of Mechanical Engineering, 2024, 60(17): 310-320.
[4]	DAI Zhiyuan, LI Tian, ZHANG Weihua, ZHANG Jiye. Research on the Aerodynamic Characteristics of High-speed Trains in Different Altitude Environments [J]. Journal of Mechanical Engineering, 2024, 60(16): 291-305.
[5]	XIAO Chunyu, LUO Xiangping, TIAN Shiqiao, GONG Dao. Research on Railway Track Curvature Detection System Based on Bogie Attitude Trajectory [J]. Journal of Mechanical Engineering, 2023, 59(6): 204-213.
[6]	YANG Xulai, YUAN Shuaishuai, YANG Wenjing, LIU Chuang, YANG Shichun. Research Progress on Energy Density of Li-ion Batteries for Evs [J]. Journal of Mechanical Engineering, 2023, 59(6): 239-254.
[7]	YANG Huan, YIN Penghui, QIN Kai, HUANG Diangui. Efficiency Analysis of 3D Wind Turbine Blade Performance Based on Blunt Trailing Edge Airfoil Blade [J]. Journal of Mechanical Engineering, 2023, 59(6): 123-130.
[8]	WANG Dengyong, LE Huayong, ZHU Di. Investigation of the Shaping Process of Island-like High Convex Structure on Thin-walled Revolving Part during Counter-rotating Electrochemical Machining [J]. Journal of Mechanical Engineering, 2023, 59(3): 337-348.
[9]	YANG Shaopu, GU Xiaohui, LIU Yongqiang, DENG Feiyue, LIU Zechao, LIU Wenpeng, WANG Baosen. Review of Dynamic Mechanism and Fault Diagnosis for Key Rotating Components of Bogies [J]. Journal of Mechanical Engineering, 2023, 59(20): 225-243.
[10]	PANG Kechao, HUANG Diangui. Investigation on the Influence of Double-Wings Blade Geometric Parameters on the Aerodynamic Performance of Horizontal Axis Wind Turbine [J]. Journal of Mechanical Engineering, 2023, 59(2): 259-267.
[11]	TAO Guidong, WANG Wenjing, FENG Yonghua, LI Guangquan. Research on Bench Test Method for Bogie Frame Based on Measured Line Load [J]. Journal of Mechanical Engineering, 2023, 59(14): 213-221.
[12]	LOU Zhen, CAI Lu, LI Tian, ZHANG Jiye. Numerical Research of the Snow and Ice Accumulation in the Bogie Region of High-speed Train [J]. Journal of Mechanical Engineering, 2023, 59(12): 343-353.
[13]	XU Ning, ZHANG Bo, REN Zunsong, LI Qiang, YANG Chao, YANG Guangxue, CHEN Can. Research on Fatigue of Bogie Frame of EMU Based on Running Conditions and Frequency Domain Characteristics [J]. Journal of Mechanical Engineering, 2022, 58(8): 215-226.
[14]	SUN Zhujun, XU Bin, HUANG Diangui. Effect of Vortex Induced Vibrated Cylinder on the Aerodynamic Performance of Airfoil [J]. Journal of Mechanical Engineering, 2022, 58(6): 242-252.
[15]	YAN Ying, SUN Guo-rong, DONG Jin-tong, ZHOU Ping. Research on Electrochemical Machining Technology of Small-hole Using Suction Electrode [J]. Journal of Mechanical Engineering, 2022, 58(5): 268-277.

NC-BASED METHOD TO REDUCE ERROR CAUSED BY ELECTRODE ORBIT IN EDM

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments