AN ANALYSIS OF CUTTING SURFACE FORMATION UNDER IN-PROCESS CUTTING

Abstract

Abstract: Based on the mechanism of cutting marks formation, mathematical expressions of turned surface of workpiece under sinsoidal and random vibration are established. The rule and the characteristics of spiral direction of cutting marks are fully studied. Puzzled phenomena of two or more spirals overlapping on the same turned surface is analytically clarified and experimentally proved. A new criterion Q is suggested. For evaluating the dynamic quality of machine tools.

Key words: Auto-forming, Basic unit, Connectivity matrix, Force density, Fractal, Tensegrity

Liu yanshan;Lin Zhihang;Huang Xieqing;Gu Chongxian. AN ANALYSIS OF CUTTING SURFACE FORMATION UNDER IN-PROCESS CUTTING[J]. , 1984, 20(1): 16-28.

[1]	ZHANG Liyuan, YANG Jinbo, LI Ao, YANG Qingkai, XU Guangkui. Review on Configuration Design and Control of Tensegrity Spherical Robots [J]. Journal of Mechanical Engineering, 2024, 60(5): 1-18.
[2]	LIU Siyuan, AI Chao, YU Chunsong, ZHANG Weizhe, CHEN Wenting, KANG Wei. Evaluation Method of Slipper Pair Performance Degradation State Based on Multi-parameter Intelligent Fusion of Deep Belief Network [J]. Journal of Mechanical Engineering, 2024, 60(4): 178-188.
[3]	WANG Jianbin, YAO Xin, ZHANG Dafu, LI Dadi, QU Sheng. Research on the Iteration Algorithm of the Wheel and Rail Contact Geometry Constraint Equations [J]. Journal of Mechanical Engineering, 2024, 60(2): 234-242.
[4]	ZHAO Hongyue, SHI Chuang, GUO Hongwei, LIU Rongqiang. Dynamic Characteristics Analysis of Spatial Large Deployable Annular Tensegrity Mechanism [J]. Journal of Mechanical Engineering, 2024, 60(12): 344-354.
[5]	LEI Junjie, LIU Meihong, HU Xiangping, WANG Juan, WANG Xueliang. Analysis of Wear Characteristics of Elliptic Arc Finger Seal Based on Fractal Theory [J]. Journal of Mechanical Engineering, 2023, 59(3): 144-157.
[6]	DING Xianwang, YANG Bing, RONG Youxin, XIAO Shoune, YANG Guangwu, ZHU Tao. Thermal Response Analysis of Wheel-rail Sliding Contact Based on W-M Fractal Function [J]. Journal of Mechanical Engineering, 2023, 59(21): 356-366.
[7]	CHEN Guolong, CAO Zheng, ZHANG Shuaishuai, JIN Wuyin. Study on the Crack Detectability Based on Koch Differential Pick-up Planar Eddy Current Probe [J]. Journal of Mechanical Engineering, 2023, 59(10): 17-29.
[8]	FENG Huayuan, SHANGGUAN Wenbin, KANG Yingzi. Interval Optimization for Generated Axial Force of Drive Shaft Systems Considering Rough Surface Characteristics [J]. Journal of Mechanical Engineering, 2022, 58(1): 221-230.
[9]	ZHANG Xueliang, ZHANG Wei, WEN Shuhua, YAO Shisheng. Three-dimensional Fractal Model with Scale Correlation for Static Friction Factor of Joint Interfaces [J]. Journal of Mechanical Engineering, 2021, 57(9): 127-138.
[10]	LUO Ani, LIU Heping, LAI Xiaoliang. Diagrams for Stable Configurations of the Basic Tensegrity Unit [J]. Journal of Mechanical Engineering, 2021, 57(23): 47-52.
[11]	MENG Qingyu, LIU Yang, YAN Xinxin, MA Yaxin, LI Yanzhen. Research on Thermal Distribution Characteristics of Motorized Spindle System Based on Fractal Theory [J]. Journal of Mechanical Engineering, 2021, 57(13): 63-69.
[12]	WANG Xiaopeng, LIU Shijun. Fractal Prediction Model of Normal Contact Stiffness of Micro-pitting Gear [J]. Journal of Mechanical Engineering, 2021, 57(1): 68-76.
[13]	ZHANG Ling, ZHENG Guolei, YANG Rongrong. Study of Synthesis and Properties of Anisotropic Fractal Surfaces [J]. Journal of Mechanical Engineering, 2019, 55(21): 118-126.
[14]	CHEN Yonghui, ZHANG Xueliang, WEN Shuhua, LAN Guosheng. Fractal Model for Normal Contact Damping of Joint Surface Considering Elastoplastic Phase [J]. Journal of Mechanical Engineering, 2019, 55(16): 58-68.
[15]	LI Xiaopeng, MU Jiaxin, PAN Wujiu, WEN Bangchun. Influence of Fractal Backlash on Dynamic Behavior of Gear-bearing System [J]. Journal of Mechanical Engineering, 2018, 54(9): 153-160.

AN ANALYSIS OF CUTTING SURFACE FORMATION UNDER IN-PROCESS CUTTING

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments