KINETICS ANALYSIS OF METAL PUSHING V-BELT CONTINUOUSLY VARIABLE TRANSMISSION

Abstract

Abstract: By analyzing the working forces on blocks, rings and axial forces on pulleys of the metal pushing –belt during torque transmitting, formulas for calculating the working forces and the axial forces on pulleys are deduced, and the method for deciding the minimal axial forces on pulleys is established. According to the calculating results of the working forces and the axial forces on pulleys under different working conditions, the rule of the load distribution between blocks and rings is got. The research results can be used for strength design and the hydraulic system control of CVT gearbox.

Key words: Automobile, Continuously variable transmission, Metal pushing V-belt

CLC Number:

TH132

Qin Datong;Liu Shiming;Wang Hongyan;Yang Yalian;Yang Wei. KINETICS ANALYSIS OF METAL PUSHING V-BELT CONTINUOUSLY VARIABLE TRANSMISSION[J]. , 2000, 36(3): 65-68.

[1]	ZHANG Fengli, ZHANG Rongrong, LUO Qiuli, ZHANG Yadong, LI Bing, GUO Hui. Research on the Aerodynamic Noise Mechanism and Noise Reduction of SUV Roof Hollow Spoiler [J]. Journal of Mechanical Engineering, 2024, 60(6): 398-408.
[2]	YANG Shujun, SHI Zhengxu, PENG Zengxiong, LI Xueliang, CHU Jiehao. Speed Ratio Control Strategy of Wheel Loader with HMT Based on PTO Torque Estimation [J]. Journal of Mechanical Engineering, 2024, 60(18): 362-373.
[3]	WANG Xiaodi, WANG Liandong, JIN Miao, LIU Heng, XU Shiwang. Analysis of Bulging-pressing Forming Mechanism and Determination of Internal and External Pressure Application Criteria for Large and Complex Shape Automobile Axle Housing Pipe [J]. Journal of Mechanical Engineering, 2022, 58(4): 62-71.
[4]	YANG Liang, PENG Chuan, LI Peiran, ZHANG Jinyuan, YANG Yang, CHU Zhigang. Analysis and Control on Pressure Relief Noise of Automobile Turbocharging System [J]. Journal of Mechanical Engineering, 2022, 58(24): 223-232.
[5]	HAN Ling, ZHAO Wei, CAO Yue, WANG Jinwu. Research on Safety Margin Optimization of CVT Transmission Based on Principle of Least Action under Lubrication Mechanism [J]. Journal of Mechanical Engineering, 2022, 58(10): 222-234.
[6]	YANG Wei, LIU Jiajun, LIU Jingyu. Active Anti-collision Warning Model Considering the Driver's Intention of the Vehicle Ahead under Internet of Vehicles [J]. Journal of Mechanical Engineering, 2021, 57(22): 284-295.
[7]	HAN Ling, LIU Hongxiang, WANG Jinwu, LIU Chang. Study on Control Optimization Strategy of Continuously Variable Transmission Based on Model Predictive Control [J]. Journal of Mechanical Engineering, 2019, 55(10): 158-167.
[8]	ZHOU Hechao, ZHAN Jun, ZHANG Chao, WANG Wenbin, ZHANG Jimin. Simulation of the City Tram Collision at the Level Crossing [J]. Journal of Mechanical Engineering, 2018, 54(8): 35-40.
[9]	LIU Yunfeng, ZHOU Yunshan, QU Daohai, WANG Jiande, FU Bing, ZHANG Feitie. Energy Consumption Analysis of Hybrid Continuously Variable Transmission Based on Electric Oil Pump [J]. Journal of Mechanical Engineering, 2018, 54(14): 125-131.
[10]	FU Bing, ZHOU Yunshan, HU Xiaolan, LI Hangyang, LIU Yunfeng, ZHANG Feitie. Friction Loss of Steel Rings in Metal V-belt CVT [J]. Journal of Mechanical Engineering, 2018, 54(14): 169-178.
[11]	ZI Bin, ZHOU Bin, QIAN Sen. Dynamic Modeling and Analysis of Cable Parallel Manipulator for Dual Automobile Cranes during Luffing Motion [J]. Journal of Mechanical Engineering, 2017, 53(7): 55-61.
[12]	HAN Ling, AN Ying, SOHEL Anwar, ZHAO Xilu. Clamping Force Control Strategy of Continuously Variable Transmission Based on Extremum Seeking Control of Sliding Mode [J]. Journal of Mechanical Engineering, 2017, 53(4): 105-113.
[13]	YANG Wei, WEI Lang, LIU Jingyu. Co-simulation Analysis of Commercial Vehicle Lateral Stability Optimization Control [J]. Journal of Mechanical Engineering, 2017, 53(2): 115-123.
[14]	ZHU Guoming, KANG Yonglin, ZHU Shuai. Study on Process， Microstructure and Property of Ultra-high Strength QP Steel for Automobile [J]. Journal of Mechanical Engineering, 2017, 53(12): 110-117.
[15]	ZHANG Xuechang, LIANG Tao, ZHANG Xu, WANG Yingying, YANG Renmin. Research on Automobile Crankshaft Roundness and Cylindricity Errors Evaluation Mathematical Model Based on the Error Conversion [J]. Journal of Mechanical Engineering, 2016, 52(2): 91-98.

KINETICS ANALYSIS OF METAL PUSHING V-BELT CONTINUOUSLY VARIABLE TRANSMISSION

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments