STUDY ON THE

›› 1996, Vol. 32 ›› Issue (1): 28-32.

• Article • Previous Articles Next Articles

STUDY ON THE "RIGIDITY" WITH ULTRASONIC VIBRATION BORING

Gao Yinhan;Shen Weihna;Wang Lijing

Jilin University of Technology

Published:1996-01-01

Abstract

Abstract: The theoretical analysis and the experimental study for the "rigidity" effect of ultrasonic vibration boring tool bar is introduced, and the essence of "rigidity" effect isrevealed. The results have shown that the "rigidity" effect is mainly influenced by the speed coefficient Kv, the smaller is Kv the more obvious "rigidity "effect.

Key words: Boring tool bar, Rigidity, Ultrasonic vibration, defects detection, inclined shaft cone, sphere surface unfolding, steel ball, surface defects

Gao Yinhan;Shen Weihna;Wang Lijing. STUDY ON THE "RIGIDITY" WITH ULTRASONIC VIBRATION BORING[J]. , 1996, 32(1): 28-32.

[1]	SU Zhipeng, LIANG Zhiqiang, LI Juan, WANG Fei, WEI Zhengyi, LIU Yuehong, KIM Yoomi, MA Yue, YIN Zhen, WANG Xibin. Experimental Research on Ultrasonic Spiral Assisted Milling and Grinding of Titanium Alloy Micro Groove [J]. Journal of Mechanical Engineering, 2024, 60(9): 5-12.
[2]	WU Hanqiang, CHEN Zhuo, YE Ximin, ZHANG Shibo, LI Sisi, ZENG Jiang, WANG Qiang, WU Yongbo. Fundamental Research on the Ultrasonic Assisted Plasma Oxidation Modification Grinding of Titanium Alloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 13-25.
[3]	DONG Zhigang, WANG Zhongwang, RAN Yichuan, BAO Yan, KANG Renke. Advances in Ultrasonic Vibration-assisted Milling of Carbon Fiber Reinforced Ceramic Matrix Composites [J]. Journal of Mechanical Engineering, 2024, 60(9): 26-56.
[4]	LIANG Fengshuang, WU Mingyang, LIU Lifei. Research on Mechanism and Subsurface Damage Characteristics of SiC Ultrasonic Grinding Based on Material Impact Characteristics [J]. Journal of Mechanical Engineering, 2024, 60(9): 75-85.
[5]	CHEN Shoufeng, WANG Chengyong, LI Weiqiu, DING Feng, LU Yaoan, ZHOU Yuhai. Material Removal Mechanism and Surface Quality Evaluation of Graphite Ultrasonic Vibration Milling [J]. Journal of Mechanical Engineering, 2024, 60(9): 86-96.
[6]	ZHOU Jingguo, ZHANG Yuhang, SUI Tianyi, XING Denghai, DONG Baokun, FU Qingyu, FU Junfan, LIN Bin. Effect of Separation-contact on the Processing Characteristics of Ultrasonic Vibration-assisted Milling of Titanium Alloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 97-113.
[7]	WU Shujing, WANG Dazhong, GU Guquan, HUANG Shuai, DONG Guojun, GUO guoqiang, AN Qinglong, LI Changhe. High-performance Machining of Complex Curved Surfaces in Multi-energy Fields: Key Technologies and Advancements [J]. Journal of Mechanical Engineering, 2024, 60(9): 152-167.
[8]	WAN Weiqiang, HAN Guangchao, WANG Xinyun, Lü Pei, LIU Fuchu, HU Jitao, BAI Wei, XU Linhong. Research Progress of Ultrasonic Assisted Micro-plastic Forming Process [J]. Journal of Mechanical Engineering, 2024, 60(18): 89-115.
[9]	ZHAO Yuhui, ZHAO Jibin, LI Mingyue, HE Zhenfeng, WANG Zhiguo, HE Chen. Eddy Current Testing Simulation and Subsurface Defect Detection of TC4 Titanium Alloy for Laser Melting Deposition [J]. Journal of Mechanical Engineering, 2024, 60(14): 34-41.
[10]	ZHANG Yuan, XU Nianwei, BAO Yan, DONG Zhigang, HAN Song, GUO Dongming, KANG Renke. Surface Topography and Roughness Prediction of Axial Ultrasonic Assisted Facing Grinding Metal [J]. Journal of Mechanical Engineering, 2023, 59(5): 307-316.
[11]	DING Wenfeng, CAO Yang, ZHAO Biao, XU Jiuhua. Research Status and Future Prospects of Ultrasonic Vibration-assisted Grinding Technology and Equipment [J]. Journal of Mechanical Engineering, 2022, 58(9): 244-269.
[12]	YUAN Songmei, SHAO Mengbo, LI Qilin, GAO Xiaoxing, CHEN Bochuan. An Simulation and Experimental Study on Ultrasonic Vibration-assisted Scratching of Titanium Carbide Particle-reinforced Steel Matrix Composites [J]. Journal of Mechanical Engineering, 2022, 58(7): 246-257.
[13]	BIE Wenbo, ZHAO Bo, GAO Guofu, XIANG Daohui, ZHAO Chongyang, TANG Jinyuan. Analytical Modeling and Experimental Investigation on Cutting Coefficient during Tangential Ultrasonic Vibration-assisted Forming Grinding Gear [J]. Journal of Mechanical Engineering, 2022, 58(7): 295-308.
[14]	SHANG Zufeng, MA Jiayao, WANG Shuxin. Review of Variable Stiffness Mechanisms in Minimally Invasive Surgical Manipulators [J]. Journal of Mechanical Engineering, 2022, 58(21): 1-15.
[15]	SHEN Lijing, GENG Kun, LI Panhao, ZHANG Jing. Design and Mechanical Analysis of Cable Rod Truss Deployable Mechanism [J]. Journal of Mechanical Engineering, 2022, 58(17): 135-143.

STUDY ON THE "RIGIDITY" WITH ULTRASONIC VIBRATION BORING

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments