| [1] |
CHENG Hongxin, LI Luyi, ZHOU Changcong.
Method for Sensitivity Analysis of the Uncertain Distribution Parameters Based on Kriging Model and Surrogate Sampling
[J]. Journal of Mechanical Engineering, 2024, 60(8): 370-383.
|
| [2] |
SHAO Haidong, LIN Jian, MIN Zhishan, MING Yuhang.
Improved Semi-supervised Prototype Network for Cross-domain Fault Diagnosis of Gearbox under Out-of-distribution Interference Samples
[J]. Journal of Mechanical Engineering, 2024, 60(4): 212-221.
|
| [3] |
CHENG Haiying, LI Xuan, ZHANG Yong.
Numerical Simulation and Air Distribution Parameters Optimization for Pulverized Coal Burner of Aggregate Drying
[J]. Journal of Mechanical Engineering, 2024, 60(20): 289-299.
|
| [4] |
ZENG Kai, TIAN Hai, XING Baoying, ZHANG Hongshen, WANG Kaiwei, HE Xiaocong.
A Non-destructive Test Method to Evaluate Interlock Structure of Self-piercing Riveted Joints
[J]. Journal of Mechanical Engineering, 2024, 60(2): 10-16.
|
| [5] |
ZHANG Boru, HU Rong, QIAN Bin, JIN Huaiping, XIANG Fenghong.
Enhanced Three-dimensional Estimation of Distribution Algorithm for Solving Integrated Scheduling Problem of Distributed Production, Transportation and Assembly
[J]. Journal of Mechanical Engineering, 2024, 60(2): 323-341.
|
| [6] |
YANG Dongqing, XIE Gaoqi, GUO Shun, PENG Yong, WANG Kehong, HUANG Jun.
Effect of Alignment Angle on Droplet Transition Behavior and Forming Characteristics of GMAW-based Double Wire for High Nitrogen Steel
[J]. Journal of Mechanical Engineering, 2024, 60(16): 171-179.
|
| [7] |
YANG Xiaoyu, XIE Liyang, YANG Yifeng, ZHAO Bingfeng.
Comparison of Three-parameter Weibull Shape Parameter Estimation Methods and Its Recommended Values
[J]. Journal of Mechanical Engineering, 2024, 60(16): 367-376.
|
| [8] |
FU Xiaojun, XU Ye, LIU Geng, LI Xin, MA Shangjun.
The Calculation Method for the Load Distribution in the Planetary Roller Screw Mechanism with the Roller Deviation
[J]. Journal of Mechanical Engineering, 2024, 60(13): 247-256.
|
| [9] |
TAN Zhipu, QIN Guohua, LOU Weida, WU Zhuxi.
High Precision Judgement Method for Milling Stability Based on Bernoulli Distribution and Hybrid Drive Model
[J]. Journal of Mechanical Engineering, 2024, 60(11): 318-331.
|
| [10] |
LIN Fen, HAO Mingbiao, WANG Tiancheng, WANG Xiaoxia.
Lateral Stability Control of Autonomous Vehicle Based on Backstepping Sliding Mode Method
[J]. Journal of Mechanical Engineering, 2024, 60(10): 497-506.
|
| [11] |
SONG Yang, CAO Huajun, ZHANG Jin, LIU Lei, ZHANG Qiongzhi.
High Speed Milling Specific Cutting Energy Model of CFRP and Its Surface Quality Optimization Based on Random Fiber Distribution
[J]. Journal of Mechanical Engineering, 2024, 60(1): 65-74.
|
| [12] |
XU Jie, GAO Jie, XIAO Mi, GAO Liang.
Design of Compliant Mechanisms by Topology Optimization Based on Isogeometric Analysis
[J]. Journal of Mechanical Engineering, 2024, 60(1): 137-148.
|
| [13] |
TIAN Yusi, JIAO Yonggang, SUN Huikai, LIU Bin, HAN Fei.
Structural Optimization and Flow Characteristics of the Interrupted Microchannels
[J]. Journal of Mechanical Engineering, 2023, 59(4): 274-282.
|
| [14] |
JIANG Xingyu, MA Shengshun, MA Mingyu, QI Peng, LIU Weijun.
Research on Optimization of Shield Display Interface Based on Attention Distribution
[J]. Journal of Mechanical Engineering, 2023, 59(4): 332-344.
|
| [15] |
FU Xiaojun, LI Xin, MA Shangjun, WANG Haiwei, LIU Geng.
Preload Mechanism of the Double-nut Planetary Roller Screw Mechanism with Pins
[J]. Journal of Mechanical Engineering, 2023, 59(3): 122-132.
|
