MOTOR LOAD TORQUE CALCULATING AND MODELING FOR SPEED CONTROL SYSTEM OF THE 2030 TANDEM COLD ROLLING MILL

Abstract

Abstract: Based on knowing well the DC motor speed control systems for 2030 tandem cold rolling mill, modeling and simulation for a double armature motor speed control system is predigested to that for a single armature motor speed control system equivalently. The physical model of the DC motor speed control system with field weakening and speed self-adjusting is established for 2030 tandem cold rolling mill. The model structure and parameters of each tache of the speed control system are obtained through the detailed analysis and account. The on-line calculation formula of the motor load torque is given for the speed control system of the tandem cold rolling mill. The simulation and actual measured results combining the spot status data show that the established model for speed control system is accurate, and the on-line calculation formula of the motor load torque is feasible.

Key words: Speed control, Double armature motor, Modeling and simulation, Motor load torque, Speed adjusting with field weakening, Tandem cold rolling mill

CLC Number:

TP15

Wang Yiqun;Fang Yiming;Sun Dengyue;Zhou Jiangang;Liu Xian. MOTOR LOAD TORQUE CALCULATING AND MODELING FOR SPEED CONTROL SYSTEM OF THE 2030 TANDEM COLD ROLLING MILL[J]. , 2005, 41(3): 128-134.

[1]	LIU Yinshui, DING Shuangshuang, MA Yushan, WU Xinyu, HAN Mingxing, CUI Yan. Research on the Pressure Control Mechanism and Cavitation Characteristics of Ant-hole Throttling Element [J]. Journal of Mechanical Engineering, 2024, 60(16): 348-356.
[2]	JI Jianhua, MIAO Changyun, LI Xianguo, LIU Yi, JI Zhenghai. Design of Fitness Function for Intelligent Parameter Tuning of PID Controller on Belt Conveyor with PSO [J]. Journal of Mechanical Engineering, 2023, 59(22): 444-456.
[3]	LIU Haichao, LIU Hongqi, FENG Ming, LI Liang, WU Jinjun, WEI Lingtao. Optimal Designing of Transmission Mechanism in Integrated Brake-by-wire System of Intelligent Vehicles [J]. Journal of Mechanical Engineering, 2022, 58(20): 399-409.
[4]	WEN Congjian, WANG Zheng, ZHANG Ziyue. Robust Model Predictive Control for Position Servo Motor System [J]. Journal of Electrical Engineering, 2021, 16(4): 59-67.
[5]	JIN Shi, SONG Shunqian, JIN Wuhen, JIANG Wang. Compound Sliding Mode Control of a New Type of Hybrid Rotor Dual-stator Synchronous Motor [J]. Journal of Electrical Engineering, 2021, 16(2): 93-99.
[6]	AI Chao, GAO Wei, CHEN Lijuan, ZHANG Yabin, GUO Jiawei. Research on the Speed Control of Hydraulic Wind Turbine Based on Wind Speed Prediction [J]. Journal of Mechanical Engineering, 2020, 56(8): 162-171.
[7]	SUN Bangcheng, LIU Zhiming, CUI Tao, LI Minggao, LI Hong, WANG Wenjun. New Structure for Train-like Vehicle and Its Path Tracking Method [J]. Journal of Mechanical Engineering, 2018, 54(24): 181-188.
[8]	ZHU Min, CHEN Huiyan. Experiment on Longitudinal Speed Tracking Control for Unmanned Off-road Vehicles [J]. Journal of Mechanical Engineering, 2018, 54(24): 111-117.
[9]	LIU Jianhua, SUN Qingchao, CHENG Hui, LIU Xiaokang, DING Xiaoyu, LIU Shaoli, XIONG Hui. The State-of-the-art, Connotation and Developing Trends of the Products Assembly Technology [J]. Journal of Mechanical Engineering, 2018, 54(11): 2-28.
[10]	KONG Xiangdong, SONG Yu, AI Chao. Constant Speed Control Method of Variable Speed Input Fixed Displacement Pump-constant Speed Output Variable Motor System [J]. Journal of Mechanical Engineering, 2016, 52(8): 179-190.
[11]	WEI Zhigang, ZHU Xuebing, CHEN Xiaohua, ZHANG Lixia. Fatigue Life Analysis of Rear Bushing of Automobile Control Arm on Bench Test [J]. Journal of Mechanical Engineering, 2016, 52(12): 81-89.
[12]	An Yuejun,Yuan Tianqing,Gao Dan,Xue Liming,Cao Jianping,Xu Xiaohui,Chen Chongfei. Way and Experiment of Multiply Increasing Speed for Single-Phase Micromotor with 50Hz Frequency Power [J]. Journal of Electrical Engineering, 2015, 10(9): 62-65.
[13]	LI Cheng, XIAO Jun, GUO Tingting, FAN Shangchun, JIN Wei. Large Deflection Mechanical Characteristics of Graphene Films [J]. Journal of Mechanical Engineering, 2015, 51(6): 87-92.
[14]	HE Yan, LIN Shenlong, WANG Yulin, LI Yufeng, WANG Lixiang. Method for Modeling the Dynamic Energy Characteristics of Multi-energy Sources in CNC Machine Tool [J]. Journal of Mechanical Engineering, 2015, 51(11): 123-132.
[15]	LI Guihua, WANG Hui, XIONG Zhao, CAO Tingfen, LIU Changchun. Assembly Accuracy Study of Large Optical Units in High Power Laser System [J]. Journal of Mechanical Engineering, 2015, 51(11): 116-122.

MOTOR LOAD TORQUE CALCULATING AND MODELING FOR SPEED CONTROL SYSTEM OF THE 2030 TANDEM COLD ROLLING MILL

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments