DYNAMIC MODELING OF BALL END MILLING

Abstract

Abstract: The vibration model of ball end milling process considering the effect of cutter flexibility is presented．The influence of the axial force on the inherence frequency of the cutter is studied．Considering the feedback of dynamic deflection of the cutter and vibration mark on the milled surface on the transient chip thickness，model of dynamic milling process is developed．Furthermore，corresponding simulations are made．It is shown that offline simulation could give predictions to dynamic features of milling process．

Key words: Ball end milling, Dynamic milling process, Regenerative milling chatter, Vibration

CLC Number:

TG54

Yan Bing;Zhang Dawei;Xu Anping;Huang Tian;Zeng Ziping. DYNAMIC MODELING OF BALL END MILLING[J]. , 2002, 38(5): 22-26.

[1]	SU Zhipeng, LIANG Zhiqiang, LI Juan, WANG Fei, WEI Zhengyi, LIU Yuehong, KIM Yoomi, MA Yue, YIN Zhen, WANG Xibin. Experimental Research on Ultrasonic Spiral Assisted Milling and Grinding of Titanium Alloy Micro Groove [J]. Journal of Mechanical Engineering, 2024, 60(9): 5-12.
[2]	WU Hanqiang, CHEN Zhuo, YE Ximin, ZHANG Shibo, LI Sisi, ZENG Jiang, WANG Qiang, WU Yongbo. Fundamental Research on the Ultrasonic Assisted Plasma Oxidation Modification Grinding of Titanium Alloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 13-25.
[3]	DONG Zhigang, WANG Zhongwang, RAN Yichuan, BAO Yan, KANG Renke. Advances in Ultrasonic Vibration-assisted Milling of Carbon Fiber Reinforced Ceramic Matrix Composites [J]. Journal of Mechanical Engineering, 2024, 60(9): 26-56.
[4]	LIANG Fengshuang, WU Mingyang, LIU Lifei. Research on Mechanism and Subsurface Damage Characteristics of SiC Ultrasonic Grinding Based on Material Impact Characteristics [J]. Journal of Mechanical Engineering, 2024, 60(9): 75-85.
[5]	CHEN Shoufeng, WANG Chengyong, LI Weiqiu, DING Feng, LU Yaoan, ZHOU Yuhai. Material Removal Mechanism and Surface Quality Evaluation of Graphite Ultrasonic Vibration Milling [J]. Journal of Mechanical Engineering, 2024, 60(9): 86-96.
[6]	ZHOU Jingguo, ZHANG Yuhang, SUI Tianyi, XING Denghai, DONG Baokun, FU Qingyu, FU Junfan, LIN Bin. Effect of Separation-contact on the Processing Characteristics of Ultrasonic Vibration-assisted Milling of Titanium Alloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 97-113.
[7]	WU Shujing, WANG Dazhong, GU Guquan, HUANG Shuai, DONG Guojun, GUO guoqiang, AN Qinglong, LI Changhe. High-performance Machining of Complex Curved Surfaces in Multi-energy Fields: Key Technologies and Advancements [J]. Journal of Mechanical Engineering, 2024, 60(9): 152-167.
[8]	ZHANG Hang, FU Kuan, CHEN Minghao, LI Rui, SHI Xinna. Dynamic Evolution and Vibration Reduction Analysis of Multi-section Serial In-pipe Inspection Robot When Crossing Obstacles [J]. Journal of Mechanical Engineering, 2024, 60(8): 348-359.
[9]	XU Fengyu, MA Kaiwei, SONG Julong, FAN Baojie, WU Xinjun. Vibration Reduction Mechanism and Control Method of Cable Climbing Robot Based on Spring-magnetorheological Damper [J]. Journal of Mechanical Engineering, 2024, 60(8): 384-395.
[10]	LUO Zhong, SHI Baolong, WU Fayong, LI Yuqi, LIU Kaining, ZHANG Xiaoxia. Study on the Vibration Characteristics of Bolted Joint Rotor System Considering Assembly Technology [J]. Journal of Mechanical Engineering, 2024, 60(8): 396-406.
[11]	SUN Shilin, WANG Tianyang, CHU Fulei. Review of Structural Health Monitoring of Wind Turbine Blades Based on Vibration and Acoustic Measurement [J]. Journal of Mechanical Engineering, 2024, 60(7): 79-92.
[12]	HE Dongping, WANG Tao, LIU Yuanming, XU Huidong, WANG Jun, WANG Zhihua. Review of Theoretical Studies on Vibration in Strip Rolling Mill [J]. Journal of Mechanical Engineering, 2024, 60(7): 93-113.
[13]	WANG Tengfei, SUN Wenjing, ZHOU Jinsong, GONG Dao, WANG Qiushi, ZHANG Zhanfei. Research on Compiling Vibration Load Spectrum of Equipment mounted on Bogie Frame Based on Fatigue Damage Spectrum [J]. Journal of Mechanical Engineering, 2024, 60(6): 287-295.
[14]	WEI Jing, LIU Zhirou, WEI Haibo, XU Ziyang. Time-space Transformation Method of Vibration Displacement and Dynamic Strain in Nodal-diameter Vibration of High-speed Thin-walled Gear [J]. Journal of Mechanical Engineering, 2024, 60(5): 70-80.
[15]	MA Zhaozhao, ZHOU Ruiping, YANG Qingchao, LEE Heow Pueh, CHAI Kai. Dynamic Characteristics of a Two-stage Quasi-zero-stiffness Vibration Isolation System with Electromagnetic Shunt Damping [J]. Journal of Mechanical Engineering, 2024, 60(5): 157-168.

DYNAMIC MODELING OF BALL END MILLING

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments