|
2002 Vol.15 Supplement |
|
|
Song Huizong, et al
Investigation on the bonding mechanism of non-occupying
coating to
resin-coated sand (RCS)……………………………………………………………………………………(1)
Yang Wu
Probing into methods for studying stress corrosion
cracking of mechanical
engineering materials …………………………………………………………………………(5)
Qiao Guanjun, et al
Study of strength and fatigue behavior of some ceramic materials…………………………………………………… (9)
Lou Zhenliang, et al
Key technologies in KBE and its application ………………………………………………………………………(15)
Zhao Wansheng, et al
Study of rapid tooling with laminated removal ED-milling …………………………………………………………(20)
Yang Zhiyi, et al
Ferrography based on debris group theory and its
application to machine
failure prediction…………………………………………………………………………… (25)
Cao Fei, et al
Optimization of the blank design in deep drawing
by the computer simulation method…………………………………………………………………………………(29)
Zeng Qi, et al
Virtual die tryout technology for sheet metal forming……………………………………………………………… (32)
Hu Lianxi, et al
Thermostability of Ti/Al composite powders prepared by mechanical milling
…………………………………… (35)
Xing Shuming, et al
Continuity conditions of the semisolid continuous casting process…………………………………………………(39)
Lu Mei, et al
Experimental research on the bio-energy conversion technology…………………………………………………… (43)
Hu Shaoxing, et al
Real time detecting technique for workpiece based on computer vision ……………………………………………(48)
Han Xinmin
Change of competitive advantage and our choice…………………………………………………………………… (52)
Ji Fengwei, et al
Building a security system for PDM ……………………………………………………………………………… (57)
Li Qingfen, et al
Expert system of engineering component design
based on fracture mechanics………………………………………(60)
Guo Zhenmin, et al
Adaptive method for weldment surface reconstruction to
scattered 3D points ……………………………………(64)
Zhao Qingliang, et al
Diamond tip based single asperity cutting with
an atomic force microscope ………………………………………(67)
Wang J, et al
Analysis of the cutting performance in contouring
using an abrasive waterjet………………………………………(73)
Masood S H, et al
Development of a CAD-based jewellery design system ……………………………………………………………(79)
Ajmal A, et al
Reverse engineering for an integrated CAD/CAM system …………………………………………………………(84)
Lin Ma,et al
Push and pull schemes in virtual cellular manufaturing………………………………………………………………(91)
Prasad K D V, et al
Development of a mathematical model for rapid product
development using microwave heating……………………………………………………………………………… (97)
Bok S H, et al
Development of an internet-based collaborative design platform …………………………………………………(103)
Norihiko Narutaki
High-speed machining of titanium alloy…………………………………………………………………………… (109)
Prakash J R S, et al
Model for predicting tool life in micro milling of copper ………………………………………………………… (115)
Shanmugam D K, et al
Direct spray metal rapid tooling using fused deposition modelling ………………………………………………(121)
Liu Xianli, et al
On mechanism of dry cutting GCr15 bearing steel
with different hardness
……………………………………… (127)
Xie Shunqiang, et al
Kinematic analysis and newton-euler equations of
a novel hybrid machine tool ……………………………………………………………………………………… (132)
Jing Huaijing, et al
Research on virtual machine tools …………………………………………………………………………………(139)
Chen Zefei, et al
New cutting tool used for manufacturing long metal fiber………………………………………………………… (143)
Sun Baoyuan, et al
State-of-the-art research
and development of
piezoeletric cutting dynamometer …………………………………(147)
Wang Dianlong, et al
Numerical simulation study on predicting model for
plane face ball end milling cutter……………………………………………………………………………………(153)
Zhang Libin, et al
Frequency response of a digital feed drive for
cutting noncircular elements ………………………………………(157)
Zheng Haojun, et al
Study on five-legged robot climbing motion ……………………………………………………………………… (161)
Yuan Zhejun, et al
Mirror surface grinding of steel bonded carbides …………………………………………………………………
(166)
Ai Xing, et al
Developments and applications of tool materials
in high speed machining ……………………………………… (171)
Zhang Feihu, et al
Research on magnetorheological finishing of optical glass
…………………………………………………………(175)
Fu Huinan, et al
Micro-indentation behavior of HOPG investigated
by experiment and MD simulation…………………………………………………………………………………(178)
Huang Chuanzhen, et al
Study on the wear resistance ability of ZrO2/Al2O3
ce-ramic scissors
for spinning and weaving…………………………………………………………………………(183)
Wu Xuesong, et al
Technique of prestressing in tension for circular saw blades
based on stress calculated ………………………………………………………………………………………… (187)
Wang Qi, et al
Approach of fast avoiding link interference of
6 DOF parallel kinematic machine tool ……………………………………………………………………………(191)
Yao Bin, et al
Study on five-axis machining of special rotary cutter with
controllable cutting tool angle……………………………………………………………………………………… (196)
Xiong Zhenqin, et al
Output characteristics analysis of planetary elliptic gear train ……………………………………………………(200)
Wang Yang, et al
Research of mechanism of laser assisted hot machining for Al2O3 particle
reinforced aluminum matrix composite ……………………………………………………………………………(203)
He Ning, et al
Cutting equation for high speed cutting of
difficult-to-cut materials……………………………………………… (207)
Wang J, et al
Allowing for tool flank wear in predicting cutting forces
for oblique machining ………………………………… (211) |
|
|
|