首页|业界动态|文献园地|科技期刊|文献翻译|科技论坛|会员中心|网站功能

English 旧版网站 邮箱

中检索

  首页《机械工程学报》2008年7期目录→余热驱动多功能热管型吸附制冰机组的性能

余热驱动多功能热管型吸附制冰机组的性能

 

李廷贤  王如竹  王丽伟  陆紫生

(上海交通大学制冷与低温工程研究所 上海 200240)

 

摘要:介绍一种以氯化钙/活性炭复合吸附剂和氨作为吸附工质对的多功能热管型吸附式制冰机组,该机组利用低品位余热作为驱动热源进行制冰。为了强化机组换热及防止余热腐蚀现象,采用热管技术完成吸附床的加热解吸、冷却吸附及回热过程,吸附床加热解吸时,形成以余热发生装置为热管蒸发段、以吸附床为热管冷凝段的热管型加热回路;两吸附床间回热时形成以高温解吸床为热管蒸发段、以低温吸附床为热管冷凝段的热管型回热回路;吸附床冷却吸附时,形成以吸附床为热管蒸发段、以冷却器为热管冷凝段的热管型冷却回路。在此基础上采用新回质回热循环方式对机组性能进行了研究。试验结果表明:新回质回热方式与传统回质回热方式相比,可大幅度增加机组制冷量,单位质量吸附剂制冷功率,(Specific cooling power,SCP)和性能系数(Coefficient of performance,COP)增大幅度均在17 %以上;相对基本循环,传统回质回热方式可使机组COP提高43.8 %,新回质回热方式可使机组COP提高幅度高达68.7 %。可见采用新回质回热方式更有利于提高吸附制冰机组的工作性能。

关键词:吸附制冷  回质  回热  热管  制冰机

中图分类号:TK172

国家杰出青年科学基金(50225621)和上海市自然科学基金(05ZR14072 )资助项目。20070830收到初稿,20080425收到修改稿

 
浏览(下载)论文全文(PDF格式)

 

作者简介:李廷贤,男,1979年出生,博士研究生。主要研究方向为吸附式制冷。
E-mail:litx@sjtu.edu.cn

参 考 文 献

[1] 王如竹,吴静怡,代彦军,等. 吸附式制冷[M]. 北京:机械工业出版社,2002.
WANG Ruzhu, WU Jingyi, DAI Yanjun, et al. Adsorption refrigeration [M]. Beijing:China Machine Press, 2002.
[2] WANG Ruzhu,OLIVEIRA R G. Adsorption refrigeration— an efficient way to make good use of waste heat and solar energy [J]. Progress in Energy and Combustion Science,2006,32:424-458.
[3] SHELTON S V,WEPFER J W,MILES D J. Ramp wave analysis of the solid/vapor heat pump [J]. ASME J. Energy Resources Technology,1990,112:69-78.
[4] CRITOPH R E. Performance estimation of convective thermal wave adsorption cycles [J]. Applied Thermal Engineering,1996,16:429-437.
[5] DOUSS N,SUN L M,MEUNIER F. Predictive model and experimental results for a two-adsorber solid adsorption heat pump [J]. Ind. Eng. Chem. Res.,1988,27:310-316.
[6] PONS M, POYELLE F. Adsorptive machines with advantaged cycles for heat pumping or cooling applications [J]. International Journal of Refrigeration,1999,22:27-37.
[7] WANG Ruzhu. Performance improvement of adsorption cooling by heat and mass recovery operation[J]. International Journal of Refrigeration,2001,24:602-611.
[8] SAHA B B,KOYAMA S,KASHIWAGI T,et al. Waste heat driven dual-mode, multi-stage, multi-bed regenerative adsorption system[J]. International Journal of Refrigera- tion,2003,26:749-757.
[9] 王如竹,王丽伟. 低品位热能驱动的绿色制冷技术:吸附式制冷[J]. 科学通报,2005,50 (2):101-111.
WANG Ruzhu, WANG Liwei. Adsorption refrigeration— Green cooling driven by low-grade thermal energy [J]. Chinese Science Bulletin,2005,50 (2):101-111.
[10] WANG Liwei,WANG Ruzhu,WU Jingyi, et al. Compound adsorbent for adsorption ice maker on fishing boats [J]. International Journal of Refrigeration,2004,27:401-408.
[11] WANG Ruzhu . Efficient adsorption refrigerators integrated with heat pipes [J]. Applied Thermal Engineering,2008,28:317-326.
[12] WANG Liwei, WANG Ruzhu, LU Zisheng. Split heat pipe type compound adsorption ice making test unit for fishing boats [J]. International Journal of Refrigeration,2006,29:456-468.
[13] AKAHIRA A,ALAM K C A,HAMAMOTO Y. Mass recovery adsorption refrigeration cycle-improving cooling capacity [J]. International Journal of Refrigeration,2004,27:225-234.

关于我们-联系我们-网站地图-广告服务-人才招聘-加盟合作-法律声明

地址: 中国北京百万庄大街22号  邮编: 100037  电话: 8610-88379907  传真: 8610-68994557
E-mail: cjme@mail.machineinfo.gov.cn  http: // www.cjmenet.com.cn
©2006 版权所有《机械工程学报》编辑部