Experimental Study on the Effect of Top Foil Sagging on the Performance of Thrust Foil Bearing

doi:10.3901/JME.2022.15.226

Abstract

Abstract: The effect of top foil sagging on the static characteristics of gas thrust foil bearings is investigated.A gas thrust foil bearing test rig is built.Four top foils with different thicknesses of 0.10 mm, 0.15 mm, 0.20 mm, and 0.30 mm are selected, and bearing load capacity, friction torque and top foil deformation in taper area are measured.Test results showed that under the same external load, the top foil deformation decreases with increase of top foil thickness, which can make hydrodynamic pressure distribution on the top foil more uniform and reduce the friction torque of the bearing.However, when the thickness of top foil reaches more than 0.2 mm, the top deformation of taper area no longer decreases obviously and the friction torque increases.Therefore, it is inappropriate to use top foils with the thickness of about 0.20 mm in engineering application.

Key words: gas thrust foil bearing, top foil sagging, load capacity, friction torque, deformation

CLC Number:

V229
TH133

QIU Shuoxian, XU Fangcheng. Experimental Study on the Effect of Top Foil Sagging on the Performance of Thrust Foil Bearing[J]. Journal of Mechanical Engineering, 2022, 58(15): 226-232,242.

References

[1] LEE Y B, KIM T Y, KIM C H, et al. Thrust bump air foil bearings with variable axial Load:Theoretical predictions and experiments[J]. Tribology Transactions, 2011, 54(6):902-910.
[2] AGRAWAL G L. Foil air/gas bearing technology-an overview[C]. ASME Turbo Expo, June 2-5, 1997, Orlando, Florida, USA, 1997.
[3] FENG K, KANEKO S. Analytical model of bump-Type foil bearings using a link-spring structure and a finite-Element shell Model[J]. Journal of Tribology, 2010, 132(2):021706-11.
[4] HESHMAT H, WALOWIT J A, PINKUS O. Analysis of gas-lubricated foil journal bearings[J]. Journal of Lubrication Technology, 1983, 105(4):647-655.
[5] KU C-P R, HESHMAT H. Compliant foil bearings structural stiffness analysis:Part I-theoretical model including strip and variable bump foil geometry[J].Journal of Tribology, 1992, 114(2):394-400.
[6] HESHMAT H, WALOWIT J A, PINKUS O. Analysis of gas lubricated compliant thrust bearings[J]. Journal of Lubrication Technology, 1983, 105(4):638-646.
[7] KU C-P R. Dynamic structural properties of compliant foil thrust bearings-comparison between experimental and theoretical results[J]. Journal of Tribology, 1994, 116(1):70-7s5.
[8] IORDANOFF I. Analysis of an aerodynamic compliant foil thrust bearing:Method for a rapid design[J]. Journal of Tribology, 1999, 121(4):816-822.
[9] HESHMAT C A, XU D S, HESHMAT H. Analysis of gas lubricated foil thrust bearings using coupled finite element and finite difference methods[J]. Journal of Tribology, 2000, 122(1):199-204.
[10] PARK D-J, KIM C-H, JANG G-H, et al. Theoretical considerations of static and dynamic characteristics of air foil thrust bearing with tilt and slip flow[J]. Tribology International, 2008, 41(4):282-295.
[11] DYKAS B, BRUCKNER R, DELLACORTE C, et al.Design, fabrication, and performance of foil gas thrust bearings for microturbomachinery applications[J]. Journal of Engineering for Gas Turbines and Power, 2009, 131(1):012301.
[12] CONBOY T M. Real-gas effects in foil thrust bearings operating in the turbulent regime[J]. Journal of Tribology, 2013, 135(3):031703.
[13] GAD A M, KANEKO S. A new structural stiffness model for bump-type foil bearings:Application to generation II gas lubricated foil thrust bearing[J]. Journal of Tribology, 2014, 136(4):041701.
[14] KIM T H, PARK M, LEE T W. Design optimization of gas foil thrust bearings for maximum load capacity[J]. Journal of Tribology, 2017, 139(3):031705.
[15] KIM T H, PARK M S, LEE J, et al. Identification of dynamic characteristics of gas foil thrust bearings using base excitation[C]. ASME Turbo Expo, June 13-17, 2016, Seoul, South Korea, 2016.
[16] LATRAY N T, KIM D. A high speed test rig capable of running at 190, 000rpm to characterize gas foil thrust bearings[C]. ASME Turbo Expo, June 11-15, 2018, Oslo, Norway, 2018.
[17] FU G, UNTAROIU A, SWANSON E. Effect of foil geometry on the static performance of thrust foil bearings[J]. Journal of Engineering for Gas Turbines and Power, 2018, 140(8):082502.
[18] ZHOU Q, HOU Y, CHEN C. Dynamic stability experiments of compliant foil thrust bearing with viscoelastic support[J]. Tribology International, 2009, 42(5):662-665.
[19] CHEN R G, ZHOU Q, LIU Y, et al. A preliminary study of the load bearing capacity of a new foil thrust gas bearing[J]. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2011, 225(C3):673-678.
[20] FENG K, KANEKO S. A thermohydrodynamic sparse mesh model of bump-type foil bearings[J]. Journal of Engineering for Gas Turbines and Power, 2013, 135(2):022501.
[21] QIN K, LI D, LUO K, et al. Comparison of modelling approaches for bump-type foil thrust bearings operating with CO₂[C]//ASME Turbo Expo, June 11-15, 2018, Oslo, Norway, 2018.
[22] XU F C, KIM D J, YAZDI B Z. Theoretical study of top foil sagging effect on the performance of air thrust foil bearing[C]//ASME Turbo Expo, June 13-17, 2016, Seoul, South Korea, 2016.