Research on Building Method and Application of Quality Control Model for Marine Shaft System

doi:10.3901/JME.2018.10.211

Abstract

Abstract: Pointed the problem that it is lack of scientific quality control method in marine shaft system design in traditional design process for marine shaft system, building method of design quality control model for marine shaft system based on quality function deployment is studied. Meanwhile related problems of the model such as acquiring method for requirement indexes, weight calculation method for requirement indexes, weight calculation method for output indexes of House of Quality, are studied and solved. Furthermore, design quality control model for certain marine shaft system design is built, and quality basis of each design stage for the shaft system is clarified, which indicated that the research is effective and feasible. It shows that the design quality control model for marine shaft system could provide scientific basis for acquiring and mapping design requirements and quality control for marine shaft system design, which could also help to improve initiative, science and accuracy for marine shaft system design, and it has important theoretical significance and broad application prospects.

Key words: neural network, design quality control model, house of quality, marine shaft system, radial basis function, rough set theory

CLC Number:

U664

LIU Jinlin, ZENG Fanming, YANG Li, WU Jiechang, LI Wenjian, WANG Taixiang. Research on Building Method and Application of Quality Control Model for Marine Shaft System[J]. Journal of Mechanical Engineering, 2018, 54(10): 211-217.

References

[1] 陈国钧,曾凡明.现代舰船轮机工程[M].长沙:国防科技大学出版社,2001. CHEN Guojun, ZENG Fanming. Marine engineering of modern warships[M]. Changsha:The Press of National University of Defense Technology,2001.
[2] 熊伟. 质量创新-基于质量功能展开的系统方法[M]. 北京:中国质检出版社,2015. XIONG Wei. Quality innovation:System approach based on quality function deployment[M]. Beijing:Chinese Quality Inspection Press,2015.
[3] The University of Michigan Transportation Research Institute, Marine Systems Division. Quality function deployment for the U.S. shipbuilding industry[R]. New York:National Shipbuilding Research, 1993.
[4] 杨健,宋裕农.基于QFD的潜艇指挥自动化系统作战需求分析[J].舰船电子工程,2005,25(4):50-56. YANG Jian, SONG Yulong. Operations requirements analysis about submarine commands automation system based on QFD[J]. Ship Electronic Engineering, 2005,25(4):50-56.
[5] 周宏,蒋志勇.质量功能展开在潜艇研制中的应用[J].华东船舶工业学院学报,2005,19(1):10-14. ZHOU Hong, JIANG Zhiyong. Application of quality function deployment in manufacture of submarine[J]. Journal of East China Shipbuilding Institute, 2005,19(1):10-14.
[6] 方喜峰,赵良才.基于知识的CAQFD系统的开发[J].华东船舶工业学院学报,2000,14(1):67-70. FANG Xifeng, HU Liangcai. Design and realizing of caqfd system based on intellective technology[J]. Journal of East China Shipbuilding Institute, 2000,14(1):67-70.
[7] 许永平,石福丽,杨峰. 基于QFD与作战仿真的舰艇装备需求分析方法[J]. 系统工程理论与实践,2010,30(1):167-172. XU Yongping, SHI Fuli, YANG Feng. Requirement analysis method in naval battleships design based on QFD and operational simulation techniques[J]. Systems Engineering-Theory & Practice, 2010,30(1):167-172.
[8] 杨龙,严振华,王明哲. QFD与Sobol法在武器装备需求分析中的应用[J]. 舰船电子工程,2012,32(3):107-110. YANG Long, YAN Zhenhua, WANG Mingzhe. Application of QFD and Sobol'method in the requirement analysis of weapon and equipment[J]. Ship Electronic Engineering, 2012,32(3):107-110.
[9] 张居凤. 基于QFD/SPA的武器装备需求分析方法[J].系统理论工程与实践,2012,32(9):2016-2021. ZHANG Jufeng. Requirements analysis of weapons and equipment based on QFD and SPA methods[J]. Systems Engineering-Theory&Practice, 2012,32(9):2016-2021.
[10] 石福丽. 基于QFD/SysML的舰船装备需求分析方法研究[D]. 长沙:国防科学技术大学, 2006. SHI Fuli. Research on requirement analysis of ship equipment based on QFD&SysML[D]. Changsha:National University of Defense Technology, 2006.
[11] 赵虹,石海林,王晓亮. 现代造船模式下应用QFD方法初探[J]. 船舶,2011,22(4):74-76. ZHAO Hong, SHI Hailin, WANG Xiaoliang. QFD application in modern shipbuilding mode[J]. Ship & Boat,2011,22(4):74-76.
[12] 廖健,何琳,吕志强,等. 船用操舵装置系统架构方案的综合评价方法研究[J]. 机床与液压,2017,45(7):59-63. LIAO Jian, HE Lin, LV Zhiqiang, et al. Study on the comprehensive evaluation of system architecture schemes for the steering gear for ships[J]. Machine Tools&Hydraulics,2017, 45(7):59-63.
[13] 刘金林,曾凡明. 三角模糊层次分析法的在舰船动力装置需求指标权重计算中的应用研究[J]. 大连海事大学学报, 2012, 38(4):35-38. LIU Jinlin,ZENG Fanming. Research on the calculation method for the requirement index weight of the marine power plant based on fuzzy AHP[J]. Journal of Dalian Maritime University, 2012, 38(4):35-38.
[14] 刘金林,曾凡明,涂皓. QFD和TRIZ集成理论的舰船动力装置概念设计中的应用研究[J].大连海事大学学报,2013,39(4):86-90. LIU Jinlin,ZENG Fanming, TU Hao. Research on the application of the QFD and TRIZ integrated theory to the conceptual design of the Marine power plant[J]. Journal of Dalian Maritime University, 2013,39(4):86-90.
[15] 刘金林,曾凡明,涂皓,等. QFD理论的舰船动力装置方案设计中的应用研究[J].海军工程大学学报,2014,26(2):68-71. LIU Jinlin,ZENG Fanming, TU Hao, et al. Research on application of the QFD theory to the conceptual design of the Marine power plant[J]. Journal of Naval University of Engineering,2014,26(2):68-71.
[16] 孟书,申桂香,陈炳锟,等. 基于灰关联的加工中心可用性需求重要度研究[J]. 机械工程学报,2016,52(24):187-193. MENG Shu, SHEN Guixiang, CHEN Bingkun, et al. Analysis on requirement importance rating for availability of machining center based on grey relation method[J]. Journal of Mechanical Engineering,2016,52(24):187-193.