Research of Vibration and Strategy in High Speed Cold-rolling Mill

doi:10.3901/JME.2016.11.088

Abstract

Abstract: Dealing with the vibration behavior in the 5th mill with the rolling seed over 650 m/min for T5 strip continuous cold rolling in one of the steel enterprises of China, starting with the measurement and analysis of the mill vibration, the vibration source and frequency are confirmed, and the measured results and the patterns of the vibration are verified by FEM. According to the conclusion that the vibration is caused by the lubricant state in the roll’s gap, with optimizing the lubricating state of the mill, the vibration behavior is eliminated while rolling the T5 strip with the rolling speed to/over 900m/min, the mill’s bottle-neck problem for T5 strip rolling is overcome.

Key words: cold-rolling mill, lubrication, rolling, steel strip, vibration

CLC Number:

TG356

WEI Liqun, DAI Zhifang, XIAO Zhuang, QU Zhihao. Research of Vibration and Strategy in High Speed Cold-rolling Mill[J]. Journal of Mechanical Engineering, 2016, 52(11): 88-94.

References

[1] 邹家祥,徐乐江．冷连轧机系统振动控制[M]．北京：冶金工业出版社,1998．
ZHOU Jiaxiang,XU Lejiang. Control tandem cold rolling mill vibration[M]. Beijing：Metalurgy and Industry Publishing Company,1998.
[2] 林鹤,邹家祥,岳海龙．轧制液对带钢冷轧机颤振的影响[J]．钢铁,1996,31(10)：60-64．
LIN He,ZOU Jiaxiang,YUE Hailong. The effect of rolling liquid to strip cold rolling vibration[J ]. Iron and Steel,1996,31(10)：60-64.
[3] 孙志辉,邹家祥．轧制润滑摩擦对轧机振动的影响[J]．重型机械,1998(6)：25-27.
SUN Zhihui,ZOU Jiaxiang . The effect of rolling lubricate frication to rolling mill vibration[J]. Heavy Machinery,1998(6)： 25-27.
[4] 何汝迎,岳海龙,邹家祥．冷连轧机模态测试研究[J]．轧钢,1999(3)：9-12．
HE Ruying,YUE Hailong,ZHOU Jiaxiang . The research of tandem cold rolling mill mode test[J]. Steel Rolling,1999(3)：9-12.
[5] 邹家祥,史小路,孙志辉．带钢冷连轧机自激振动诊断[J]．钢铁,1997,32(7)：65-68．
ZHOU Jiaxiang,SHI Xiaolu,SUN Zhihui. Diagnose strip tandem cold rolling mill self-excited vibration[J]. Iron and Steel,1997,32(7)：65-68.
[6] 林鹤,邹家祥,岳海龙．四辊冷轧机第三倍频程颤振[J]．钢铁,1999,34(12)：56-59．
LIN He, ZOU Jiaxiang, YUE Hailong. Four-h cold rolling mill chatter of the three-octave[J]. Iron and Steel, 1999, 34 (12)：56-59.
[7] 闫晓强,王辉,周杰,等．现代连轧机耦合振动抑制重要进展[J]．中国冶金,2014,24(4)：1-4．
YAN Xiaoqiang,WANG Hui,ZHOU Jie,et al. Important progress of coupling vibration inhibition on modern tandem mil[J]. China Metallurgy,2014, 24(4)：1-4.
[8] 陈培林,王泽济,汪晨. 带钢表面振纹的研究[J]．世界钢铁,2002,2(4)：28-31.
CHEN Peilin,WANG Zheji,WANG Chen. Research of chatter marks on steel strip surface[J]. World Iron and Steel,2002,2(4)：28-31.
[9] ROBERTS W L. 4-H mill stand chatter of fifth octave mode[J]. Iron and Steel Engineer,1978,55(10)：41-47 .
[10] GOU R M,ANDRE C U,JERRY H SCHUNK．Analysis of chatter vibration phenomena of rolling mills using finite element methods[J]. Iron and Steel Engineer,1993(1)：29-37.
[11] GERALD L N,JAMES F C．Identification of chatter sources in cold rolling mills[J]. Iron and Steel Engineer,1993(1)：40-46.
[12] JOHN J G．Vibration analysis identifies the causes of mill chatter[J].Iron and Steel Engineer,1991(2)：27-35.
[13] 瞿志豪,柴绍宽,叶黔元．1420冷连轧机的动态特性及颤振分析[J]．振动与冲击,2006,25(4)：25-29.
QU Zhihao,CHAI Shaokuan,YE Qianyuan.The analyses vibration character in 1420 continuous cold rolling mill[J]. Journal of Vibration and Shock,2006,25(4)：25-29.
[14] YAN X Q. Research on the impact of AGC vbration on the horizontal vibration of the roll system for CSP rolling mill[J]. Journal of Advanced Materials Research,2010,139-141(3)：2049.
[15] LIU H M,XIU X Y,JIA C Y. Theory-intelligent dynamic matrix model of flatness control for cold rolled strip[J]. Journal of Iron and Steel Research International,2013,20(8)：1-4.
[16] 杨旭, 童朝南. 板带轧机振动问题研究[J]. 钢铁研究学报,2009,21(11)：1-4,11.
YANG Xu,TONG Chaonian. Chatter in rolling mill[J]. Journal of Iron and Steel Research,2009,21(11)：1-4,11.