Compliance Evaluation and Sensitivity Analysis of a Parallel Spindle Head

doi:10.3901/JME.2016.11.001

Abstract

CLC Number:

TG156

LI Qi, MA Yue, HUANG Tian. Compliance Evaluation and Sensitivity Analysis of a Parallel Spindle Head[J]. Journal of Mechanical Engineering, 2016, 52(11): 1-10.

[1] WECK M,STAIMER D. Parallel kinematic machine tools - current state and future potentials[J]. CIRP Annals - Manufacturing Technology,2002,51(2)：671-683.
[2] HENNES N. Ecospeed：An innovative machining concept for high performance 5-axis-machining of large structural component in aircraft engineering[C]// Proceedings of the 3rd Chemnitz Parallel kinematics Seminar,May 23-25,2002,Zwickau. Chemnitz：Verlag Wissenschaftliche Scripten,2002：763-774.
[3] HENNES N,STAIMER D. Application of PKM in aerospace manufacturing high performance machining centers ECOSPEED,ECOSPEED-F and ECOLINER[C]// Proceedings of the 4th Chemnitz Parallel Kinematics Seminar,April 23-25,2004,Zwickau. Chemnitz：Verlag Wissenschaftliche Scripten,2004：557-577.
[4] URIARTE L,ZATARAIN M,AXINTE D,et al. Machine tools for large parts[J]. CIRP Annals - Manufacturing Technology,2013,62(2)：731-750.
[5] PIRAS G,CLEGHORN W L,MILLS J K. Dynamic finite-element analysis of a planar high-speed,high-precision parallel manipulator with flexible links[J]. Mechanism and Machine Theory,2005,40(7)：849-862.
[6] ZHANG Jun,LI Yonggang,HUANG Tian. Dynamic modeling and eigenvalue evaluation of a 3-DOF PKM module[J]. Chinese Journal of Mechanical Engineering,2010,23(2)：166-173.
[7] ZHANG Jun,ZHAO Yanqin,DAI Jiansheng. Compliance modeling and analysis of a 3-RPS parallel kinematic machine module[J]. Chinese Journal of Mechanical Engineering,2014,27(4)：703-713.
[8] EL-KHASAWNEH B S,FERREIRA P M. Computation of stiffness and stiffness bounds for parallel link manipulators[J]. International Journal of Machine Tools and Manufacture,1999,39(2)：321-342.
[9] NAGAI K,LIU Z Y. A systematic approach to stiffness analysis of parallel mechanisms and its comparison with FEM[C]// Proceeding of SICE Annual Conference,September 17-20,2007,Kagawa University,Takamatsu. New York：IEEE,2007：1087-1094.
[10] LI Y W,WANG J S,WANG L P. Stiffness analysis of a Stewart platform-based parallel kinematic machine[C]// Proceedings of IEEE International Conference on Robotics and Automation,May 11-15,Washington DC,USA. New York：IEEE,2002：3672-3677.
[11] GOSSELIN C. Stiffness mapping for parallel manipulator[J]. IEEE Transactions on Robotics and Automation,1990,6(3)：377-382.
[12] ZHANG D,BI Z M,LI B Z. Design and kinetostatic analysis of a new parallel manipulator[J]. Robotics and Computer-Integrated Manufacturing,2009,25(4-5)：782-791.
[13] REZAEI A,AKBARZADEH A,AKBARZADEH T M R. An investigation on stiffness of a 3-PSP spatial parallel mechanism with flexible moving platform using invariant form[J]. Mechanism and Machine Theory,2012,51：195-216.
[14] YOE S H,YANG G,LIM W B. Design and analysis of cable-driven manipulators with variable stiffness[J]. Mechanism and Machine Theory,2013,69：230-244.
[15] LI Qi,WANG Manxin,HUANG Tian,et al. Compliance analysis of a 3-DOF spindle head by considering gravitational effects[J]. Chinese Journal of Mechanical Engineering,2015,28(1)：1-10.
[16] PASHKEVICH A,KLIMCHIK A,CHABLAT D. Enhanced stiffness modeling of manipulators with passive joints[J]. Mechanism and Machine Theory,2011,46(5)：662-679.
[17] PASHKEVICH A,CHABLAT D,WENGER P. Stiffness analysis of over-constrained parallel manipulators[J]. Mechanism and Machine Theory,2009,44(5)：966-982.
[18] KLIMCHIK A,PASHKEVICH A,CARO S,et al. Stiffness matrix of manipulators with passive joints：Computational aspects[J]. IEEE Transactions on Robotics,2012,28(4)：955-958.
[19] WANG Y Y,HUANG T,ZHAO X M,et al. A semi-analytical approach for stiffness modeling of PKM by considering compliance of machine frame with complex geometry[J]. Chinese Science Bulletin,2008,53(16)：2565-2574.
[20] WANG Y Y,CHETWYND D G,LIU H T,et al. Stiffness modeling of the Tricept robot using the overall Jacobian matrix[J]. Journal of Mechanisms and Robotics,2009,1(2)：021002-1-8.
[21] LI Y G,LIU H T,ZHAO X M,et al. Design of a 3-DOF PKM module for large structural component machining[J]. Mechanism and Machine Theory,2010,45(6)：941-954.
[22] LI Y G,ZHANG E J,SONG Y M,et al. Stiffness modeling and analysis of a novel 4-DOF PKM for manufacturing large components[J]. Chinese Journal of Aeronautics,2013,26(6)：1577-1585.
[23] 方兵. 精密数控机床及其典型结合面理论建模与实验研究[D]. 长春：吉林大学,2012.
FANG Bing. Theoretical modeling and experimental study of precision CNC machine tools and its typical interface[D]. Changchun：Jilin University,2012.
[24] 王书亭,李杰,刘涛,等. 机械固定结合面刚度特性建模[J]. 华中科技大学学报,2011,39(1)：1-5.
WANG Shuting,LI Jie,LIU Tao,et al. Interfacial stiffness characteristic modeling of mechanical fixed joints[J]. Journal Huazhong University of Science and Technology,2011,39(1)：1-5.
[25] 贾文峰,张学良,温淑花,等. 基于虚拟材料的结合面建模与参数获取方法[J]. 太原科技大学学报,2013,34(5)：347-351.
JIA Wenfeng,ZHANG Xueliang,WEN Shuhua,et al. A method for modeling and parameter acquisitions of joints based on virtual materials[J]. Journal of Taiyuan University of Science and Technology,2013,34(5)：347-351.
[26] 曹定胜,王学林,张宏志. 高速加工中心有限元计算模型与实验验证[J]. 振动与冲击,2006,35(3)：190-192.
CAO Dingsheng,WANG Xuelin,ZHANG Hongzhi. FE model and experiment verification for machining center model analysis[J]. Journal Vibration and Shock,2006,35(3)：190-192.
[27] LIN C Y,HUNG J P,LO T L. Effect of preload of linear guides on dynamic characteristics of a vertical column-spindle system[J]. International Journal of Machine Tools and Manufacture,2010,50(8)：741-746.
[28] 毛宽民,李斌,谢波,等. 滚动直线导轨副可动结合部动力学建模[J]. 华中科技大学学报,2008,36(8)：85-88.
MAO Kuanmin,LI Bin,XIE Bo,et al. Dynamic modeling of the movable joint on rolling linear guide[J]. Journal Huazhong University of Science and Technology,2008,36(8)：85-88.
[29] HUANG D T Y,LEE J J. On obtaining machine tool stiffness by CAE techniques[J]. International Journal of Machine Tools and Manufacture,2001,41(8)：1149-1163.
[30] 蒋书运,祝书龙. 带滚珠丝杠副的直线导轨结合部动态刚度特性[J]. 机械工程学报,2010,46(1)：92-99.
JIANG Shuyun,ZHU Shulong. Dynamic characteristic parameters of linear guideway joint with ball screw[J]. Journal of Mechanical Engineering,2010,46(1)：92-99.
[31] Online Schaeffler CO LTD[EB/OL]. [2014-07-01]. http：//www.schaeffler.cn.
[32] Online THK CO LTD[EB/OL]. [2014-07-01]. http：//www.thk.com.

Compliance Evaluation and Sensitivity Analysis of a Parallel Spindle Head

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	FANG Xudong, DENG Wubin, WU Zutang, LI Jin, WU Chen, MAEDA Ryutaro, TIAN Bian, ZHAO Libo, LIN Qijing, ZHANG Zhongkai, HAN Xiangguang, JIANG Zhuangde. Respiration Measurement Technology Based on Inertial Sensors：A Review [J]. Journal of Mechanical Engineering, 2024, 60(20): 1-23.
[2]	FU Yang, ZHANG Yue, MAO Ying, TANG Xiaohua, CHEN Zugao, XU Hewu, YANG Yupei, GAO Bin, TIAN Guiyun. Feature Boosting Framework for Pipeline Multi-sensing Defects Inspection Using an Intelligent Pig System [J]. Journal of Mechanical Engineering, 2024, 60(20): 51-67.
[3]	WU Jie, SHEN Yifu, HUANG Guoqiang. Investigation into the Microstructure and Properties of 2024Al TIG Joint with Wire Filler Subjected to Friction Stir Processing [J]. Journal of Mechanical Engineering, 2024, 60(20): 153-161.
[4]	ZHANG Zhiyong, WANG Yuxiang, HUANG Caixia, WU You, DU Ronghua. Vehicle Lateral Collision Warning Based on Grey Prediction and Kalman Filter [J]. Journal of Mechanical Engineering, 2024, 60(20): 240-250.
[5]	LIAO Guiwen, ZHANG Yi, WEI Kai, LIU Xiaojun, WANG Wei. Coupling Characteristics of Liquid-solid Two-phase Flow Field Structure and Particle Motion Behavior at Restricted Lubrication Interface [J]. Journal of Mechanical Engineering, 2024, 60(20): 351-360.
[6]	WANG Xu, JIANG Xingyu, YANG Guozhe, SUN Meng, YU Shenhong, BI Kaihang, ZHAO Rizheng, LIU Weijun. Research on Optimization of Human-Machine Interface Layout of Laser Cleaning Equipment Based on PSO-SSA [J]. Journal of Mechanical Engineering, 2024, 60(20): 372-387.
[7]	WANG Dexiang, ZHANG Yu, JIANG Jingliang, LIU Xinfu, LIU Guoliang. Tribological Mechanism on the Grinding Interface of Nickel-base Superalloy under Minimum Quantity Lubrication with Ionic Liquid and Palm Oil Based Nanofluids [J]. Journal of Mechanical Engineering, 2024, 60(19): 159-171.
[8]	LI Pu, LU Daixing. A Review of Co-simulation Algorithm [J]. Journal of Mechanical Engineering, 2024, 60(19): 172-186.
[9]	WANG Xiaoyu, WEI Zhaocheng, WANG Xueqin, WANG Dong. Geometric Modeling of Residual Materials in Impeller Milling with Double Row Slotting [J]. Journal of Mechanical Engineering, 2024, 60(19): 310-317.
[10]	WANG Gaojian, LIU Li, KANG Dandan, YE Yanhong, DENG Dean. Effect of Ni Content on Microstructure, Mechanical Properties and Corrosion Behavior of Weathering Steel Weld Metal for High-speed Train Bogies [J]. Journal of Mechanical Engineering, 2024, 60(18): 163-172.
[11]	ZHANG Mingkang, SHI Wenqing, XU Meizhen, WANG Di, CHEN Jie. Compression and Fluid Pressure Drop Properties of Implicit Surface Cellular Structures [J]. Journal of Mechanical Engineering, 2024, 60(18): 394-406.
[12]	MA Weijia, ZHU Xiaolong, LIU Qingyao, DUAN Xingguang, LI Changsheng. Artificial Intelligence in Robot-assisted Surgery [J]. Journal of Mechanical Engineering, 2024, 60(17): 22-39.
[13]	YUAN Xiaoqing, WU Tao, YUAN Xun, WANG Wendong. Research on a Full-body Power-assisted Exoskeleton Control Method Based on GSO-RF Intent Recognition Algorithm [J]. Journal of Mechanical Engineering, 2024, 60(17): 91-101.
[14]	ZHANG Yuze, ZHAO Jingfu, ZHAO Zhenwei, KANG Rongjie, DAI Jiansheng, SONG Zhibin. Design and Analysis of a Parallel Cable Driven Lower Limb Rehabilitation Robot for Multi Joints Training [J]. Journal of Mechanical Engineering, 2024, 60(17): 111-122.
[15]	LIANG Xu, ZHANG Jianyong, LI Guotao, SU Tingting, HE Guangping, HOU Zengguang. Redundant Parallel Mechanism for Fracture Reduction Surgery: Design, Modeling and Performance Analysis [J]. Journal of Mechanical Engineering, 2024, 60(17): 133-146.