Research on Cavitation of Valve Plate Groove for the High Pressure Axial Piston Pump

doi:10.3901/JME.260201

Abstract

Abstract: To guide the optimization design and explore the cavitation mechanism in the groove of the valve plate in a high-pressure axial piston. A cavitation numerical model is established based on the flow characteristics in the groove, and a visualization experiment is carried out using a high-speed camera. Subsequently, a numerical simulation model including a single piston cavity and a valve plate fluid domain is established. The cavitation of the valve plate under high pressure is simulated. The mechanisms of jet-flow cavitation and vortex cavitation are investigated, and the evolution of vortices and cavitation at different rotation angles is analyzed. An optimized valve plate is proposed. Finally, comparative tests are conducted on the complete pump to evaluate the performance of the original and optimized valve plates. The results indicate that the cavitation model simulations and visual experiments show good agreement. A high-velocity jet area is formed when the oil passes through the groove. The jet area becomes longer, and the jet angle becomes smaller when the opening is half. At the high-velocity jet-flow and vortices in the grooves of the valve plate, the pressure drops below the saturated vapor pressure of the hydraulic oil, thereby inducing jet cavitation and vortex cavitation. The vortices gradually expand and become more flattened in shape as the piston chamber rotation angle increases, while the vortex core on the lower side of the jet-flow region progressively shifts downstream. The cavitation region exhibits a similar evolution trend to that of the jet-flow and vortices structures. The optimized valve plate reduces cavitation, decreasing vapor volume fraction by 53.43%. Pressure pulsation and noise level are reduced by 76.19% and 4.8 dB(A) at 2 000 r/min and 20 MPa, respectively.

Key words: axial piston pump, valve plate, cavitation, jet-flow, vortex, optimization

CLC Number:

TH137

HOU Xiaonan, WU Wei, WEI Chunhui, ZHAO Jun. Research on Cavitation of Valve Plate Groove for the High Pressure Axial Piston Pump[J]. Journal of Mechanical Engineering, 2026, 62(6): 380-390.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.260201

http://www.cjmenet.com.cn/EN/Y2026/V62/I6/380

References

[1] 张军辉，刘施镐，徐兵，等. 轴向柱塞泵智能化关键技术研究进展及发展趋势[J]. 机械工程学报，2024，60(4)：32-49. ZHANG Junhui，LIU Shihao，XU Bing，et al. Research status and development trends on intelligent key technology of the axial piston pump[J]. Journal of Mechanical Engineering，2024，60(4)：32-49.
[2] PAN Yang，CHEN Anhua，WANG Zhineng. Fluid dynamic characteristics and flow distribution ‎structure optimization of axial piston pump considering ‎cavitation bubble evolution[J]. Journal of Applied Fluid Mechanics，2021，14(6)：1603-1616.
[3] WANG Yefang，ZHANG Fan，YUAN Shouqi，et al. Influence of cavitation on unsteady vortical flows in a side channel pump[J]. Chinese Journal of Mechanical Engineering，2023，36(25)：1-19.
[4] OUYANG Tiancheng，MO Xiaoyu，LU Yucai，et al. CFD-vibration coupled model for predicting cavitation in gear transmissions[J]. International Journal of Mechanical Sciences，2022，225：107377.
[5] 宋文武，石建伟，魏立超，等. 高速离心泵回流漩涡及空化特性[J]. 机械工程学报，2020，56(4)：95-103. SONG Wenwu，SHI Jianwei，WEI Lichao，et al. Analysis of backflow vortex and cavitation of high speed centrifugal pump[J]. Journal of Mechanical Engineering，2020，56(4)：95-103.
[6] YAN Longlong，GAO Bo，NI Dan，et al. Numerical analysis on the cavitation characteristics of a pump with an inducer in non-uniform inflow[J]. Ocean Engineering，2022，256：111407.
[7] ZHANG Xuejing，WANG Li，ZHU Guisheng，et al. Study on the unsteady cavitation flow characteristics inside the mixed transport twin screw pump[J]. International Journal of Fluid Machinery and Systems，2024，17(1)：80-87.
[8] LONG Yun，ZHOU Zhen，LI Ning，et al. Experimental and numerical investigation of tip leakage vortex cavitation in water-jet pump[J]. Journal of Applied Fluid Mechanics，2024，17(6)：1191-1203.
[9] LONG Yun，ZHOU Zhen，ZHONG Jinqing，et al. Experimental study on evolution of cavitation flow structure in hump region of waterjet pump[J]. Journal of Applied Fluid Mechanics，2024，17(12)：2734-2744.
[10] ZHOU Hengzhi，XIANG Chun，ZHOU Peijian，et al. Numerical simulation study of vortex cavitation and induced pulsation characteristics in spiral lobe pumps[J]. AIP Advances，2024，14(12)：125311.
[11] 築地徹浩. 轴向柱塞泵内部空化流的可视化分析[J]. 液压与气动，2015(2)：1-7. TSUKJUI T. Visualized analysis of cavitation inside axial piston pump[J]. Chinese Hydraulics & Pneumatics，2015(2)：1-7.
[12] 张晋，龚学知，胡建军，等. 轴向柱塞泵配流分析用湍流模型探析[J]. 机械工程学报，2018，54(18)：204-211. ZHANG Jin，GONG Xuezhi，HU Jianjun，et al. CFD Analysis of the turbulence model adopted in distribution process in axial piston pump[J]. Journal of Mechanical Engineering，2018，54(18)：204-211.
[13] 刘珊珊，雷欣瑞，宋字宇，等. 柱塞泵配流盘卸荷槽开度对瞬态流场特征影响[J]. 北京航空航天大学学报，2024，50(9)：2919-2929. LIU Shanshan，LEI Xinrui，SONG Ziyu，et al. Influence of unloading groove opening of port plate of piston pump on transient flow field characteristics[J]. Journal of Beijing University of Aeronautics and Astronautics，2024，50(9)：2919-2929.
[14] 田振东，黄家海，王灏，等. 基于全空化模型的高压柱塞泵配流盘空化研究[J]. 液压与气动，2018(1)：17-22. TIAN Zhendong，HUANG Jiahai，WANG Hao，et al. Research based on full cavitation model for cavitation of high pressure axial piston pump valve plate[J]. Chinese Hydraulics & Pneumatics，2018(1)：17-22.
[15] FROSINA E，MARINARO G，SENATORE A. Experimental and numerical analysis of an axial piston pump：A comparison between lumped parameter and 3D CFD approaches[C]// ASME，JSME，KSME. Proceedings of the ASME-JSME-KSME 20198th Joint Fluids Engineering Conference，July 28-August 1，2019，San Francisco，CA，USA. New York：ASME，2019：1-7.
[16] CHAO Qun，ZHANG Junhui，XU Bing，et al. Centrifugal effects on cavitation in the cylinder chambers for high-speed axial piston pumps[J]. Meccanica，2019，54(6)：815-829.
[17] YAN Song，JIANG Yi，HU Mengya. Study on the cavitation suppression mechanism of axial piston pump[J]. International Journal of Aerospace Engineering，2022，2022：1-13.
[18] YIN Fanglong，KONG Xiangle，JI Hui，et al. Research on the pressure and flow characteristics of seawater axial piston pump considering cavitation for reverse osmosis desalination system[J]. Desalination，2022，540：115998.
[19] ZHANG Bin，ZHAO Chunxiao，HONG Haocen，et al. Optimization of the outlet unloading structure to prevent gaseous cavitation in a high-pressure axial piston pump[J]. Proceedings of the Institution of Mechanical Engineers，Part C：Journal of Mechanical Engineering Science，2022，236(7)：3459-3473.
[20] WU Tong，ZHANG Juxin，LI Ruichuan，et al. Analysis and optimization of flow field characteristics of axial piston motor based on CFD[J]. Flow Measurement and Instrumentation，2024，99：102669.
[21] 王慧，岳星岐，赵国超，等. 斜盘式轴向柱塞泵空化特性分析[J]. 兵器装备工程学报，2024，45(3)：26-33. WANG Hui，YUE Xingqi，ZHAO Guochao，et al. Analysis of cavitation characteristics of swash plate axial piston pump[J]. Journal of Ordnance Equipment Engineering，2024，45(3)：26-33.
[22] 李莹，徐良玉，王飞，等. 高速轴向柱塞泵吸油压力对空化特性的影响[J]. 液压与气动，2025，49(1)：50-60. LI Ying，XU Liangyu，WANG Fei，et al. Impact of suction pressure on cavitation characteristics in high-speed axial piston pump[J]. Chinese Hydraulics & Pneumatics，2025，49(1)：50-60.
[23] ZHANG Yuning，LIU Kaihua，XIAN Haizhen，et al. A review of methods for vortex identification in hydroturbines[J]. Renewable and Sustainable Energy Reviews，2018，81：1269-1285.
[24] YE Shaogan，ZHANG Junhui，XU Bing. Noise reduction of an axial piston pump by valve plate optimization[J]. Chinese Journal of Mechanical Engineering，2018，31：57.