Study on the 3D Printing Process and Axial Compression Performance of Reinforced Cylindrical Shell

doi:10.3901/JME.2024.15.283

Abstract

Abstract: In view of the shortcomings of the traditional forming process, combined with the advantages of additive manufacturing of low-cost and rapid manufacturing, the development status of 3D printing technology of reinforced cylindrical shell is analyzed, a reinforced cylindrical shell rotary 3D printing process method based on material extrusion technology is proposed, the rotary 3D printing process equipment is developed, and the grid structure and printing path for the reinforced cylindrical shell of continuous fiber reinforced composite materials are designed. The axial compressive properties of rectangular, triangular and diamond-shaped mesh ribs are explored under the same structural parameters, and the results showed that the axial compressive performance of diamond-shaped reinforced cylindrical shells was the best.

Key words: rotation 3D printing, reinforced cylindrical shell, mesh shape, continuous fiber reinforced composites, axial mechanical properties

CLC Number:

TH162

LIU Mingliang, TANG Qi, TIAN Xiaoyong, LIU Tengfei, QIN Yingjie, LI Dichen. Study on the 3D Printing Process and Axial Compression Performance of Reinforced Cylindrical Shell[J]. Journal of Mechanical Engineering, 2024, 60(15): 283-290.

References

[1] 杜善义，方岱宁，孟松鹤，等.“近空间飞行器的关键基础科学问题”重大研究计划结题综述[J].中国科学基金，2017，31(2):109-114.DU Shanyi，FANG Daining，MENG Songhe，et al.A review of the key basic science issues of near-space vehicles[J].Science Foundation of China，2017，31(2):109-114.
[2] VASILIEV V V，BARYNIN V A，RAZIN A F.Anisogrid composite lattice structures – Development and aerospace applications[J].Composite Structures，2012，94(3):1117-1127.
[3] VASILIEV V V，BARYNIN V A，RAZIN A F，et al.Anisogrid composite lattice floor beam structures for commercial airplanes[C]//Proceedings of 20th International Conference on Composites，Copenhagen，Denmark.2015.
[4] RAZIN A F.The Problem of optimum design of composite housings of solid propellant rocket engines[J].Mechanics of Solids，2018，53(4):418-426.
[5] LI Ming，SUN Fangfang，LAI Changliang，et al.Fabrication and testing of composite hierarchical Isogrid stiffened cylinder[J].Composites Science and Technology，2018，157(3):152-159.
[6] SORRENTINO L，MARCHETTI M，BELLINI C，et al.Manufacture of high performance isogrid structure by robotic filament winding[J].Composite Structures，2017，164(6):43-50.
[7] CHACON J M，CAMINERO M A，GARCIA-PLAZA E，et al.Additive manufacturing of PLA structures using fused deposition modelling:Effect of process parameters on mechanical properties and their optimal selection[J].Materials & Design，2017，124:143-157.
[8] 徐隆坤.3D打印蜂窝结构各向异性和屈曲研究及实验验证[D].大连:大连理工大学，2018.XU Longkun.Research on anisotropy and buckling of 3D printed honeycomb structure and experimental verification[D].Dalian:Dalian University of Technology，2018.
[9] 郭永光.热塑性点阵及夹芯圆柱壳吸能性研究[D]．重庆:重庆大学，2020.GUO Yongguang.Study on energy absorption of thermoplastic lattice and sandwich cylindrical shell[D].Chongqing :Chongqing University，2020.
[10] van MANEN T，JANBAZ S，JANSEN K，et al.4D printing of reconfigurable metamaterials and devices[J].Communications Materials，2021，2(1):1-8.
[11] HAO W，LIU Y，ZHOU H，et al.Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites[J].Polymer Testing，2018，65(2):29-34.
[12] RAOUF N，DAVAR A，POURTAKDOUST S H.Reliability analysis of composite anisogrid lattice interstage structure[J].Mechanics Based Design of Structures and Machines，2022，50(9):3322-3330.
[13] HYEOK M J，TAEK S K，GUL I K，et al.Failure load prediction of anisogrid cylindrical composite lattice structures using failure criterion based on ratio of bending to compressive stress[J].Journal of Mechanical Science and Technology，2021，35(11):4897-4906.
[14] XIONG J，GHOSH R，MA L，et al.Bending behavior of lightweight sandwich-walled shells with pyramidal truss cores[J].Composite Structures，2014，116:793-804.
[15] XIONG J，FENG L，GHOSH R，et al.Fabrication and mechanical behavior of carbon fiber composite sandwich cylindrical shells with corrugated cores[J].Composite Structures，2016，156:307-319.
[16] YANG J，XIONG J，MA L，et al.Modal response of all-composite corrugated sandwich cylindrical shells[J].Composites Science and Technology，2015，115:9-20.
[17] YANG J，XIONG J，MA L，et al.Study on vibration damping of composite sandwich cylindrical shell with pyramidal truss-like cores[J].Composite Structures，2014，117:362-372.
[18] YANG J，MA L，CHAVES-VARGAS M，et al.Influence of manufacturing defects on modal properties of composite pyramidal truss-like core sandwich cylindrical panels[J].Composites Science and Technology，2017，147:89-99.
[19] YANG J S，MA L，SCHRÖDER K U，et al.Experimental and numerical study on the modal characteristics of hybrid carbon fiber composite foam filled corrugated sandwich cylindrical panels[J].Polymer Testing，2018，68:8-18.
[20] FAN Yunxing，LI Yihong.Research on damp heat resistant medium-temperature epoxy resin system for UAV[J].High-tech Fiber and Application，2022，47(6):55-60.
[21] ISAAC W C，PAWELCZYK M，WRONA S.Comparative study of sound transmission losses of sandwich composite double panel walls[J].Applied Sciences，2020，10(4):1543.
[22] QIN Z.Magneto-thermo-elasticity of an electroconductive circular cylindrical shell featuring nonlinear deformations[J].International Journal of Engineering Science，2010，48(12):1797-1810.
[23] TOTARO G.Local buckling modelling of isogrid and anisogrid lattice cylindrical shells with triangular cells[J].Composite Structures，2011，94(2):446-452.
[24] HA S N，LU G.Thin-walled corrugated structures:A review of crashworthiness designs and energy absorption characteristics[J].Thin-Walled Structures，2020，157:106995.
[25] 刘腾飞，田小永，朱伟军，等.连续碳纤维增强聚乳酸复合材料3D打印及回收再利用机理与性能[J].机械工程学报，2019，55(7):128-134.LIU Tengfei，TIAN Xiaoyong，ZHU Weijun，et al.Mechanism and performance of continuous carbon fiber reinforced polylactic acid composite 3D printing and recycling[J].Journal of Mechanical Engineering，2019，55(7):128-134.
[26] JIANG Houfeng，JIA Ru，AIYITI W，et al.Infill strategies for 3D-printed CF-PEEK/HA-PEEK honeycomb core-shell composite structures[J].Journal of Manufacturing Processes，2023，92:338-349.