• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2024, Vol. 60 ›› Issue (2): 302-312.doi: 10.3901/JME.2024.02.302

Previous Articles     Next Articles

Motion Control of Independent Metering Electro-hydraulic System Based on Chamber Pressure Planning without Mode Switch

CHEN Zheng1,2, Lü Litong3, WANG Fei4, YAO Bin5, LI Dongming6, LIU Hongguang6, ZHANG Guoliang6   

  1. 1. The State Key Laboratory of Fluid Power and Mechatronics Systems, Zhejiang University, Hangzhou 310027;
    2. Ocean College, Zhejiang University, Zhoushan 316021;
    3. School of Mechanical Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043;
    4. Beijing Institute of Space Launch Technology, Beijing 100072;
    5. School of Mechanical Engineering, Purdue University, West Lafayette IN47907, USA;
    6. Jiangsu Hengli Hydraulic Co., Ltd., Changzhou 213164
  • Received:2023-01-07 Revised:2023-08-15 Online:2024-01-20 Published:2024-04-09

Abstract: Independent metering system is one of the hotspots within the area of electro-hydraulics. However, the system presents dual-input-single-output property, which brings extra flexibility to control design. Mode switching is the most widely used strategy when dealing with such flexibility. However, the control objectives are changing frequently under different modes and can possibly cause pressure chattering. In this study, based on chamber pressure planning and tracking control, motion control of independent metering system is developed. According to the desired cylinder force, the pressure reference trajectory for the rod-end chamber is planned. Then, the motion and pressure tracking controllers are designed for both chambers. Such strategy avoids the discontinuous control objectives caused by mode switches essentially. Finally, comparative experiments are conducted under positive and negative load conditions. The results show the pressure chattering phenomenon caused by mode switches, and verify that the proposed strategy leads to smoother working condition of the independent metering system.

Key words: independent metering system, pressure control, motion control

CLC Number: