Recent Progress in Reliability Technology of CNC Machine Tools

doi:10.3901/JME.2023.19.152

Abstract

Abstract: CNC machine tools as the industrial mother machine of the manufacturing industry, are the national strategic equipment, and reliability technology is the key common technology to limit the quality of its products. The new progress of reliability technology research in CNC machine tools in China in the past ten years or so is mainly reviewed, including the whole life cycle technology route, reliability test technology and equipment, reliability design, reliability growth, and reliability database and test research base construction. The analysis points out the problems and shortcomings of reliability technology research, and the technical needs and development dynamics of CNC machine tools reliability are foreseen.

Key words: CNC machine tools, reliability, research progress

CLC Number:

TG659

YANG Zhaojun, HE Jialong, LIU Zhifeng, LI Guofa, CHEN Chuanhai. Recent Progress in Reliability Technology of CNC Machine Tools[J]. Journal of Mechanical Engineering, 2023, 59(19): 152-163.

References

[1] 杨兆军,陈传海,陈菲,等. 数控机床可靠性技术的研究进展[J]. 机械工程学报,2013,49(20):130-139. YANG Zhaojun,CHEN Chuanhai,CHEN Fei,et al. Progress in the research of reliability technology of machine tools[J]. Journal of Mechanical Engineering,2013,49(20):130-139.
[2] 陈循,陈文华,谢里阳,等. 机械可靠性理论与应用——现状与发展[M]. 北京:国防工业出版社,2022. CHEN Xun,CHEN Wenhua,XIE Liyang,et al. Theory and application of mechanical reliability:current situation and development[M]. Beijing:National Defense Industry Press,2022.
[3] 李洪洲,杨兆军,许彬彬,等. 数控机床可靠性评估试验周期设计[J]. 吉林大学学报,2016,46(5):1520-1527. LI Hongzhou,YANG Zhaojun,XU Binbin,et al. Design of testing period for reliability assessment of NC machine tools[J]. Journal of Jilin University,2016,46(5):1520-1527.
[4] 杨兆军,李洪洲,陈传海,等. 考虑定时截尾数据的数控机床可靠性Bootstrap区间估计方法[J]. 机械工程学报,2017,53(7):129-137. YANG Zhaojun,LI Hongzhou,CHEN Chuanhai,et al. Bootstrap interval estimation of reliability for numerical controlled machine tools considering the time-censored data[J]. Journal of Mechanical Engineering,2017,53(7):129-137.
[5] 杨兆军,许彬彬,杨川贵,等. 由电液伺服和测功机混合加载的机床主轴可靠性试验台:CN201210370120.1[P]. 2014-11-26. YANG Zhaojun,XU Binbin,YANG Chuangui,et al. Reliability test bench for machine tool spindle loaded by hybrid electrohydraulic servo and dynamometer:CN201210370120.1[P]. 2014-11-26.
[6] 杨兆军,陈菲,李国发,等. 由测功机和液压混合加载的动力伺服刀架可靠性试验台:CN201210213399.2[P]. 2014-09-10. YANG Zhaojun,CHEN Fei,LI Guofa,et al. Reliability test bench for dynamic servo turret loaded by dynamometer and hydraulic pressure:CN201210213399.2[P]. 2014-09-10.
[7] 李国发,王剑,周传阳,等. 基于现场载荷特征的加工中心刀库机械手可靠性试验方法:CN201510119742.0[P]. 2016-04-20. LI Guofa,WANG Jian,ZHOU Chuanyang,et al. Reliability test method for machining center tool magazine manipulator based on field load characteristics:CN201210213399.2[P]. 2016-04-20.
[8] 杨兆军,何佳龙,陈菲. 光栅尺可靠性试验装置及方法:CN201610396962.2[P]. 2018-01-26. YANG Zhaojun,HE Jialong,CHEN Fei,et al. Reliability test device and method for grating ruler:CN201610396962.2[P]. 2018-01-26.
[9] 杨兆军,何佳龙,王继利,等. 编码器可靠性试验装置及方法:CN201610088216.7[P]. 2017-07-04. YANG Zhaojun,HE Jialong,WANG Jili,et al. Encoder reliability test device and method:CN201610088216.7[P]. 2017-07-04.
[10] 欧屹,冯虎田,徐益飞,等. 一种滚珠丝杠副可靠性试验装置:CN201410016756.5[P]. 2016-02-24. OU Yi,FENG Hutian,XU Yifei,et al. A ball screw reliability test device:CN201410016756.5[P]. 2016-02-24.
[11] 陶卫军,冯虎田,欧屹,等. 滚动直线导轨副可靠性试验装置及方法:CN201210509140.2[P]. 2015-02-25. TAO Weijun,FENG Hutian,OU Yi,et al. Rolling linear guide reliability test device and method:CN201210509140.2[P]. 2015-02-25.
[12] 赵钦志,王立平,王军见. 数控机床可靠性试验和评估技术分析与研究[J]. 制造技术与机床,2017(11):17-21. ZHAO Qinzhi,WANG Liping,WANG Junjian. Reliability tests and evaluation technique research of CNC machine tools[J]. Manufacturing Technology & Machine Tool,2017(11):17-21.
[13] 王义强,贾亚洲,于骏一,等. 数控车床载荷谱数据库的建立[J]. 吉林工业大学学报,1998,28(1):34-38. WANG Yiqiang,JIA Yazhou,YU Junyi,et al. Setup of the load spectrum data bank of CNC lathe[J]. Journal of Jilin University of Technology,1998,28(1):34-38.
[14] WANG Yiqiang,JIA Yazhou,SHEN Guixiang. Multidimensional force spectra of CNC machine tool tools and their applications,part one:force spectra[J]. International Journal of Fatigue,2002,24(10):1037-1046.
[15] 陈传海. 面向可靠性概率设计的数控机床载荷谱建立方法研究[D]. 长春:吉林大学,2013. CHEN Chuanhai. Study on load spectrum for probability-reliability design of NC machine tools[D]. Changchun:Jilin University,2013.
[16] 黄祖广,赵钦志,盛伯浩,等. 加工中心可靠性试验载荷谱的研究[J]. 制造技术与机床,2008(2):60-65. HUANG Zuguang,ZHAO Qinzhi,SHENG Bohao,et al. Research on the loading chart for reliability testing of machining center[J]. Manufacturing Technology & Machine Tool,2008(2):60-65.
[17] 何佳龙. 数控车床切削力谱的编制及其在功能部件可靠性试验中的应用[D]. 长春:吉林大学,2017. HE Jialong. Compilation of cutting force spectrum of CNC lathe and its application in reliability test[D]. Changchun:Jilin University,2017.
[18] 王升旭. 数控车床非平稳动态切削力谱的编制[D]. 长春:吉林大学,2021. WANG Shengxu. Compilation of nonstationary and dynamic cutting force spectrum of CNC lathe[D]. Changchun:Jilin University,2021.
[19] HE Jialong,ZHAO Xinyue,LI Guofa,et al. Time domain load extrapolation method for CNC machine tools based on GRA-POT model[J]. International Journal of Advanced Manufacturing Technology. 2019,103(9-12):3799-3812.
[20] WANG Shengxu,HE Jialong,LI Guofa,et al. Compilation method of CNC lathe cutting force spectrum based on kernel density estimation of G-SCE[J]. International Journal of Advanced Manufacturing Technology,2023,124(11-12):3713-3724.
[21] HE Jialong,WANG Shenxu,LI Guofa,et al. Compilation of NC lathe dynamic cutting force spectrum based on two-dimensional mixture models[J]. International Journal of Advanced Manufacturing Technology. 2018,98(1-4):251-262.
[22] 于立娟,安阳,何佳龙,等. 机电装备载荷谱外推技术研究进展及发展趋势[J]. 吉林大学学报,2023,53(4):941-953. YU Lijuan,AN Yang,HE Jialong,et al. Research progress and development trend of extrapolation method in electromechanical equipment load spectrum[J]. Journal of Jilin University,2023,53(4):941-953.
[23] 赵泓荀,杨兆军,陈传海,等. 考虑参数权重的数控机床电主轴加速试验优化设计[J]. 吉林大学学报,2022,52(2):409-416. ZHAO Hongxun,YANG Zhaojun,CHEN Chuanhai,et al. Optimal design of acceleration test of motorized spindle of numerical control machine tool considering parameter weight[J]. Journal of Jilin University,2022,52(2):409-416.
[24] ZHAO Hongxun,YANG Zhaojun,CHEN Chuanhai,et al. Optimal design of ladder-stress accelerated degradation test plan for motorized spindle in non-cube test area[J]. International Journal of Advanced Manufacturing Technology,2023,124(11-12):4431-4453.
[25] ZHU Dong,YANG Zhaojun,CHEN Chuanhai,et al. Compilation of program-loading spectrum for milling of a motorized spindle based on cutting force model[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering,2019,41(4),187.
[26] ZHAO Hongxun,YANG Zhaojun,CHEN Chuanhai,et al. Optimization design of step stress accelerated degradation test for motorized spindle based on Ds-optimality[J]. Applied Sciences-Basel,2021,11(9):3832.
[27] 潘凯,梁医,冯虎田,等. 基于疲劳加速寿命试验的滚动直线导轨副寿命评价[J]. 组合机床与自动化加工技术,2021,567(5):38-42,46. PAN Kai,LIANG Yi,FENG Hutian,et al. Life evaluation of rolling linear guide based on fatigue accelerated life test[J]. Modular Machine Tool & Automatic Manufacturing Technique,2021,567(5):38-42,46.
[28] YANG Zhaojun,HE Jialong,WANG Jian,et al. Bayesian method to solve the early failure period of numerical control machine tool[J]. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture,2018,232(9):1677-1686.
[29] 何佳龙,赵新跃,李国发,等. 一种便携式数控装备综合性能检测、分析平台及分析方法:CN201910879697.7[P]. 2021-03-23. HE Jialong,ZHAO Xinyue,LI Guofa,et al. A portable CNC equipment comprehensive performance testing and analysis platform and analysis method:201910879697.7[P]. 2021-03-23.
[30] ZHU Bin,WANG Liping,WU Jun. Optimal design of loading device based on a redundantly actuated parallel manipulator[J]. Mechanism and Machine Theory,2022,178:105084.
[31] 刘红艺,樊锐,郭江真,等. 面向数控机床可靠性试验的多维力随动加载装置[J]. 中国机械工程,2020,31(13):1606-1612. LIU Hongyi,FAN Rui,GUO Jiangzhen. Muti-axis loading device for reliability tests of CNC machine tools[J]. China Mechanical Engineering,2020,31(13):1606-1612.
[32] ZHONG Yuan,LI Guofa,CHEN Chuanhai,et al. Reliability allocation method based on 2-tuple linguistic weighted muirhead mean operator and 2-tuple linguistic best-worst method[J]. IEEE Transactions on Reliability,2022:1-10.
[33] 杨兆军,郝庆波,陈菲,等. 基于区间分析的数控机床可靠性模糊综合分配方法[J]. 北京工业大学学报,2011,37(3):321-329. YANG Zhaojun,HAO Qingbo,CHEN Fei. A comprehensive fuzzy reliability allocation method of NC machine tools based on interval analysis[J]. Journal of Beijing University of Technology,2011,37(3):321-329.
[34] 王继利. 基于可靠性分配与预计的高速精密冲压机床可靠性增长设计[D]. 长春:吉林大学,2014. WANG Jili. Reliability growth design of high-speed precision press based on reliability allocation and prediction[D]. Changchun:Jilin University,2014.
[35] 朱晓翠. 基于灰色理论的数控机床可靠性及维修性分析技术[D]. 长春:吉林大学,2013. ZHU Xiaocui. Study on reliability and maintainability analysis of CNC machine tools based on grey system theory[D]. Changchun:Jilin University,2013.
[36] 王晓林,黄正华,张维,等. 机床设计手册-机床现代设计卷(下册)[M]. 北京:机械工业出版社, 2021. WANG Xiaolin,HUANG Zhenghua,ZHANG Wei,et al. Machine tool design manual-modern machine tool design volume (Volume 2)[M]. Beijing:China Machine Press,2021.
[37] 张根保,柳剑,王国强. 基于任务的数控机床模糊可靠性分配方法[J]. 计算机集成制造系统,2012,18(4):768-774. ZHANG Genbao,LIU Jian,WANG Guoqiang. Fuzzy reliability allocation of CNC machine tools based on task[J]. Computer Integrated Manufacturing Systems,2012,18(4):768-774.
[38] 赵永胜,丁紫远,杨聪彬,等. 直觉梯形模糊数与熵权-TOPSIS的可靠性分配[J]. 组合机床与自动化加工技术,2022(1):76-80+84. ZHAO Yongsheng,DING Ziyuan,YANG Congbin,et al. Intuitive trapezoidal fuzzy number with entropy weight-Reliability allocation of TOPSIS[J]. Modular Machine Tool & Automatic Manufacturing Technique,2022(1):76-80+84.
[39] CHENG Qiang,KANG Yongbo,YANG Congbin,et al. A new reliability allocation method for machine tools based on ITrFNs and AHP-GRA[J]. International Journal of Advanced Manufacturing Technology,2023,124(11-12):4019-4032.
[40] CHENG Qiang,WANG Chang,SUN Dongyang,et al. A new reliability allocation method for machine tools using the intuitionistic trapezoidal fuzzy numbers and TOPSIS[J]. International Journal of Advanced Manufacturing Technology,2023,124(11-12):3689-3700.
[41] 范晋伟,刘会普,秦池,等. 基于改进模糊——熵权数控磨床可靠性分配优化研究[J]. 制造业自动化,2022,44(11):109-113,140. FAN Jinwei,LIU Huipu,QIN Chi,et al. System reliability allocation and optimization of CNC grinder based on improved fuzzy-entropy weight[J]. Manufacturing automation,2022,44(11):109-113,140.
[42] 张义民,贾敬存,黄贤振. 基于数控机床故障信息的可靠性模糊分配[J]. 东北大学学报,2015,36(2):245-249. ZHANG Yimin,JIA Jingcun,HUANG Xianzhen. Fuzzy allocation of reliability based on the fault information of CNC machine tools[J]. Journal of Northeastern University,2015,36(2):245-249.
[43] 杨庆东,李阿为. 基于层次分析法和熵权系数法的数控机床可靠性分配[J]. 北京信息科技大学学报,2015,30(6):1-6. YANG Qingdong,LI Awei. Reliability allocation of CNC machine based on analysis hierarchy process and entropy weight coefficient method[J]. Journal of Beijing Information Science & Technology University,2015,30(6):1-6.
[44] 张玉刚,孙杰,喻天翔. 考虑不同失效相关性的系统可靠性分配方法[J]. 机械工程学报,2018,54(24):206-215. ZHANG Yugang,SUN Jie,YU Tianxiang. System reliability allocation method considering different failure correlations[J]. Journal of Mechanical Engineering,2018,54(24):206-215.
[45] 吉林大学. 数控机床可靠性动态数据库及信息处理系统[CP]. 2016SR027291. 2016-02-04. JILIN University. Dynamic database and information processing system for reliability of CNC machine tools[CP]. 2016SR027291. 2016-02-04.
[46] 张根保,冉琰. 可靠性数据管理[J]. 制造技术与机床,2015(12):5-10. ZHANG Genbao,RAN Yan. Reliability data management[J]. Manufacturing Technology & Machine Tool,2015(12):5-10.
[47] ZHOU Xinda,YANG Zhaojun,TIAN Hailong,et al. Reliability optimization design of hydraulic system considering oil contamination[J]. Journal of Mechanical Science and Technology,2020,34(12):5041-5051