Journal of Mechanical Engineering ›› 2023, Vol. 59 ›› Issue (17): 109-115.doi: 10.3901/JME.2023.17.109
Previous Articles Next Articles
FU Zhongtao1, RAO Shuhang1, PAN Jianbin1,2, LI Miao3, HUANG Tao4, CHEN Xubing1
Received:
2022-09-13
Revised:
2022-12-14
Online:
2023-09-05
Published:
2023-11-16
CLC Number:
FU Zhongtao, RAO Shuhang, PAN Jianbin, LI Miao, HUANG Tao, CHEN Xubing. Towards Accurate Solution of Robot Hand-eye Relationship Based on the LMI-SDP Optimization[J]. Journal of Mechanical Engineering, 2023, 59(17): 109-115.
[1] 熊有伦,李文龙,陈文斌,等. 机器人学:建模、控制与视觉[M]. 2版. 武汉:华中科技大学出版社,2020. XIONG Youlun,LI Wenlong,CHEN Wenbin,et al. Robotics:Modeling,control and vision[M]. 2nd ed. Wuhan:Huazhong University of Science and Technology Press,2020. [2] ZHI X,SCHWERTFEGER S. Simultaneous hand-eye calibration and reconstruction[C]//2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS),2017:1470-1477. [3] SHIU Y C,AHMAD S. Calibration of wrist-mounted robotic sensors by solving homogeneous transform equations of the form AX=XB[J]. 1989(2):16-19. [4] CHOU J C,KAMEL M. Finding the position and orientation of a sensor on a robot manipulator using quaternions[J]. The International Journal of Robotics Research,1991,10(3):240-254. [5] TSAI R Y,LENZ R K. A new technique for fully autonomous and efficient 3d robotics hand-eye calibration[J]. IEEE Transactions on Robotics and Automation,1989,5(3):345-358. [6] PARK F C,MARTIN B J. Robot sensor calibration:Solving AX=XB on the Euclidean group[J]. IEEE Transactions on Robotics and Automation,1994,10(5):717-721. [7] DANIILIDIS K. Hand-eye calibration using dual quaternions[J]. The International Journal of Robotics Research,1999,18(3):286-298. [8] FU Z,PAN J,SPYRAKOS-PAPASTAVRIDIS E,et al. A dual quaternion-based approach for coordinate calibration of dual robots in collaborative motion[J]. IEEE Robotics and Automation Letters,2020,5(3):4086-4093. [9] BAYRO-CORROCHANO E,DANIILIDIS K,SOMMER G. Motor algebra for 3D kinematics:The case of the hand-eye calibration[J]. Journal of Mathematical Imaging and Vision,2000,13(2):79-100. [10] ZHAO Z,LIU Y. A hand-eye calibration algorithm based on screw motions[J]. Robotica,2009,27(2):217-223. [11] ZHAO Z. Hand-eye calibration using convex optimization[C]//2011 IEEE International Conference on Robotics and Automation,2011:2947-2952. [12] MA Q,LI H,CHIRIKJIAN G S. New probabilistic approaches to the AX=XB hand-eye calibration without correspondence[C]//2016 IEEE International Conference on Robotics and Automation (ICRA),2016:4365-4371. [13] HU X,OLESEN D,PER K. A novel robust approach for correspondence-free extrinsic calibration[C]//2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS),2019:1-6. [14] WANG G,LI W,JIANG C,et al. Simultaneous calibration of multicoordinates for a dual-robot system by solving the AXB=YCZ problem[J]. IEEE Transactions on Robotics,2021,37(4):1172-1185. [15] LIU Z,LIU X,DUAN G,et al. Precise hand-eye calibration method based on spatial distance and epipolar constraints[J]. Robotics and Autonomous Systems,2021,145:103868. [16] SHAH M. Solving the robot-world/hand-eye calibration problem using the Kronecker product[J]. Journal of Mechanisms and Robotics,2013,5(3):031007. [17] ZHAO Z. Simultaneous robot-world and hand-eye calibration by the alternative linear programming[J]. Pattern Recognition Letters,2019,127:174-180. [18] ERNST F,RICHTER L,MATTHäUS L,et al. Non-orthogonal tool/flange and robot/world calibration[J]. The International Journal of Medical Robotics and Computer Assisted Surgery,2012,8(4):407-420. [19] WANG W,LIU F,YUN C. Calibration method of robot base frame using unit quaternion form[J]. Precision Engineering,2015,41:47-54. [20] ALI I,SUOMINEN O,GOTCHEV A,et al. Methods for simultaneous robot-world-hand-eye calibration:A comparative study[J]. Sensors,2019,19(12):2837. [21] FU Z,PAN J,SPYRAKOS-PAPASTAVRIDIS E,et al. A lie-theory-based dynamic parameter identification methodology for serial manipulators[J]. IEEE/ASME Transactions on Mechatronics,2020,26(5):2688-2699. [22] SOUSA C D,CORTESAO R. Physical feasibility of robot base inertial parameter identification:A linear matrix inequality approach[J]. The International Journal of Robotics Research,2014,33(6):931-944. [23] WANG J,WU L,MENG Q H,et al. Towards simultaneous coordinate calibrations for cooperative multiple robots[C]//2014 IEEE/RSJ International Conference on Intelligent Robots and Systems,2014:410-415. |
[1] | FANG Xudong, DENG Wubin, WU Zutang, LI Jin, WU Chen, MAEDA Ryutaro, TIAN Bian, ZHAO Libo, LIN Qijing, ZHANG Zhongkai, HAN Xiangguang, JIANG Zhuangde. Respiration Measurement Technology Based on Inertial Sensors:A Review [J]. Journal of Mechanical Engineering, 2024, 60(20): 1-23. |
[2] | FU Yang, ZHANG Yue, MAO Ying, TANG Xiaohua, CHEN Zugao, XU Hewu, YANG Yupei, GAO Bin, TIAN Guiyun. Feature Boosting Framework for Pipeline Multi-sensing Defects Inspection Using an Intelligent Pig System [J]. Journal of Mechanical Engineering, 2024, 60(20): 51-67. |
[3] | WU Jie, SHEN Yifu, HUANG Guoqiang. Investigation into the Microstructure and Properties of 2024Al TIG Joint with Wire Filler Subjected to Friction Stir Processing [J]. Journal of Mechanical Engineering, 2024, 60(20): 153-161. |
[4] | ZHANG Zhiyong, WANG Yuxiang, HUANG Caixia, WU You, DU Ronghua. Vehicle Lateral Collision Warning Based on Grey Prediction and Kalman Filter [J]. Journal of Mechanical Engineering, 2024, 60(20): 240-250. |
[5] | LIAO Guiwen, ZHANG Yi, WEI Kai, LIU Xiaojun, WANG Wei. Coupling Characteristics of Liquid-solid Two-phase Flow Field Structure and Particle Motion Behavior at Restricted Lubrication Interface [J]. Journal of Mechanical Engineering, 2024, 60(20): 351-360. |
[6] | WANG Xu, JIANG Xingyu, YANG Guozhe, SUN Meng, YU Shenhong, BI Kaihang, ZHAO Rizheng, LIU Weijun. Research on Optimization of Human-Machine Interface Layout of Laser Cleaning Equipment Based on PSO-SSA [J]. Journal of Mechanical Engineering, 2024, 60(20): 372-387. |
[7] | WANG Dexiang, ZHANG Yu, JIANG Jingliang, LIU Xinfu, LIU Guoliang. Tribological Mechanism on the Grinding Interface of Nickel-base Superalloy under Minimum Quantity Lubrication with Ionic Liquid and Palm Oil Based Nanofluids [J]. Journal of Mechanical Engineering, 2024, 60(19): 159-171. |
[8] | LI Pu, LU Daixing. A Review of Co-simulation Algorithm [J]. Journal of Mechanical Engineering, 2024, 60(19): 172-186. |
[9] | WANG Xiaoyu, WEI Zhaocheng, WANG Xueqin, WANG Dong. Geometric Modeling of Residual Materials in Impeller Milling with Double Row Slotting [J]. Journal of Mechanical Engineering, 2024, 60(19): 310-317. |
[10] | WANG Gaojian, LIU Li, KANG Dandan, YE Yanhong, DENG Dean. Effect of Ni Content on Microstructure, Mechanical Properties and Corrosion Behavior of Weathering Steel Weld Metal for High-speed Train Bogies [J]. Journal of Mechanical Engineering, 2024, 60(18): 163-172. |
[11] | ZHANG Mingkang, SHI Wenqing, XU Meizhen, WANG Di, CHEN Jie. Compression and Fluid Pressure Drop Properties of Implicit Surface Cellular Structures [J]. Journal of Mechanical Engineering, 2024, 60(18): 394-406. |
[12] | MA Weijia, ZHU Xiaolong, LIU Qingyao, DUAN Xingguang, LI Changsheng. Artificial Intelligence in Robot-assisted Surgery [J]. Journal of Mechanical Engineering, 2024, 60(17): 22-39. |
[13] | YUAN Xiaoqing, WU Tao, YUAN Xun, WANG Wendong. Research on a Full-body Power-assisted Exoskeleton Control Method Based on GSO-RF Intent Recognition Algorithm [J]. Journal of Mechanical Engineering, 2024, 60(17): 91-101. |
[14] | ZHANG Yuze, ZHAO Jingfu, ZHAO Zhenwei, KANG Rongjie, DAI Jiansheng, SONG Zhibin. Design and Analysis of a Parallel Cable Driven Lower Limb Rehabilitation Robot for Multi Joints Training [J]. Journal of Mechanical Engineering, 2024, 60(17): 111-122. |
[15] | LIANG Xu, ZHANG Jianyong, LI Guotao, SU Tingting, HE Guangping, HOU Zengguang. Redundant Parallel Mechanism for Fracture Reduction Surgery: Design, Modeling and Performance Analysis [J]. Journal of Mechanical Engineering, 2024, 60(17): 133-146. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||