Dynamic Tensile Properties and Constitutive Model of 5052 Aluminum Alloy

doi:10.3901/JME.2022.08.160

Abstract

Abstract: In order to improve the safety of 5052 aluminum alloy in application and accurately calculate the strength of structural parts under complex loads, it is very necessary to study the mechanical properties of materials at different strain rates. In this paper, high temperature electronic universal testing machine and split Hopkinson tensile bar(SHTB) device are used to carry out the quasi-static and high strain rate tensile tests, the stress-strain curves of the materials are obtained, and a constative model which could accurately describe the plastic deformation behavior of the material is established. The results show that 5052 aluminum alloy has a distinct strain rate sensitivity, and with the increase of strain rate, the yield strength and ultimate strength increasing. Based on the experimental results, a modified Johnson-Cook model is proposed to fit the dynamic constitutive relation of the material, the fitting results are in good agreement with the test data; the ANSYS software is further used to simulate the uniaxial tensile process of the sample under high strain rate, and the stress-strain curve of the typical node is extracted, the results is consistent with the test result. It s indicated that the modified Johnson-Cook model can better describe the dynamic characteristics of 5052 aluminum alloy, and can provide data support for numerical simulation in practical engineering, so as to provide reliable reference and effective guidance for parts processing technology, structural design and actual production.

Key words: 5052 aluminum alloy, split hopkinson tensile bar, dynamic constitutive relation, Johnson-Cook constitutive model

CLC Number:

TG146

FANG Jinxiu, ZHANG Xingquan, WANG Huiting, XIE Lingling. Dynamic Tensile Properties and Constitutive Model of 5052 Aluminum Alloy[J]. Journal of Mechanical Engineering, 2022, 58(8): 160-169.

References

[1] 蔡辉. 5052铝合金材料研究进展[J].铝加工,2011(6):33-39. CAI Hui. Research progress of 5052 aluminum alloy materials[J]. Aluminum Fabric,2011(6):33-39.
[2] 任文达. 5052铝合金变形行为及退火处理对其微观组织与性能的影响[D].长沙:中南大学,2007. REN Wenda. Effect of deformation behavior and annealing treatment on microstructure and properties of 5052 aluminum alloy[D]. Changsha:Central South University,2007.
[3] 蔡辉. 5052铝合金板材的应变硬化行为模型探讨[J].铝加工,2014,218(3):4-8. CAI Hui. Study on strain hardening behavior model of 5052 aluminum alloy sheet[J]. Aluminum Fabric,2014,218(3):4-8.
[4] 刘阳阳. 5052铝合金变形特性及裂纹生长规律研究[D].洛阳:河南科技大学,2018. LIU Yangyang. Research on deformation characteristics and regularity of crack growth of 5052 aluminum alloy[D]. Luoyang:Henan University of Science and Technology,2018.
[5] 郑玉林,陈文敬,任文达,等. 5052铝合金热压缩变形流变应力[J].铝加工,2007,30(2):17-21. ZHENG Yulin,CHEN Wenjing,REN Wenda,et al. Flow stress of 5052 aluminum alloy thermal compression deformation[J]. Aluminum Fabric,2007,30(2):17-21.
[6] 金飞翔.不同预变形不同应变速率铝合金板材变形行为及应用研究[D].北京:机械科学研究总院,2017. JIN Feixiang. Research on deformation behavior and application of pre-deformed aluminum alloy sheet with different strain rate[D]. Beijing:China Academy of Machinery Science and Technology,2017.
[7] 余海燕,王友. 5052铝合金冲压成形过程中韧性断裂的仿真研究[J].中国有色金属学报,2015(11):2975-2981. YU Haiyan,WANG You. Bulging simulation of ductile fracture of 5052 aluminum alloy[J]. The Chinese Journal of Nonferrous Metals,2015(11):2975-2981.
[8] SMERD R,WINKLER S,SALISBURY C,et al. High strain rate tensile testing of automotive aluminum alloy sheet[J]. International Journal of Impact Engineering,2005,32(1-4):541-560.
[9] 周琳,王子豪,文鹤鸣.简论金属材料JC本构模型的精确性(英文)[J].高压物理学报,2019,33(4):1-14. ZHOU Lin,WANG Zihao,WEN Heming. On the accuracy of the Johnson-Cook constitutive model for metals[J]. Chinese Journal of High Pressure Physics,2019,33(4):1-14.
[10] 周文华.预变形铝合金板材高应变率塑性变形行为研究[D].南昌:南昌航空大学,2014. ZHOU Wenhua. Plastic deformation behaviors of pre-strained aluminum under high strain rate loadings[D]. Nanchang:Nanchang Hangkong University,2014.
[11] MA Huijuan,HUANG Liang,TIAN Yi,et al. Effects of strain rate on dynamic mechanical behavior and microstructure evolution of 5A02-O aluminum alloy[J]. Materials Science&Engineering A,2014,606:233-239.
[12] ZHANG Dingni,SHANGGUAN Qianqian,XIE Canjun,et al. A modified Johnson-Cook model of dynamic tensile behaviors for 7075-T6 aluminum alloy[J]. Journal of Alloys&Compounds,2015,619:186-194.
[13] 张涛,陈伟,关玉璞. 2A70合金动态力学性能与本构关系的研究[J].南京航空航天大学学报,2013,45(3):367-372. ZHANG Tao,CHEN Wei,GUAN Yupu. Dynamic mechanical behavior and constitutive relations of aluminum alloy 2A70[J]. Journal of Nanjing University of Aeronautics and Astronautics,2013,45(3):367-372.
[14] 包卫平,赵昱臻,李春明,等.纯铁高温高应变率下的动态本构关系试验研究[J].机械工程学报,2010,46(4):74-79. BAO Weiping,ZHAO Yuzhen,LI Chunming,et al. Experimental research on the dynamic constitutive relation of pure iron at elevated temperatures and high strain rates[J]. Journal of Mechanical Engineering,2010,46(4):74-79.
[15] FANG Jinxiu,MO Jianhua,CUI Xiaohui,et al. Electromagnetic pulse-assisted incremental drawing of aluminum cylindrical cup[J]. Journal of Materials Processing Technology,2016,238:395-408.
[16] 方进秀.铝合金筒形件电磁脉冲辅助渐进拉深研究[D].武汉:华中科技大学,2016. FANG Jinxiu. Research on electromagnetic pulse assisted incremental drawing of aluminum alloy cylindrical parts[D]. Wuhan:Huazhong University of Science&Technology,2016.
[17] FANG Jinxiu,MO Jianhua,LI Jianjun. Microstructure difference of 5052 aluminum alloys under conventional drawing and electromagnetic pulse assisted incremental drawing[J]. Materials Characterization,2017,129:88-97.
[18] 杨开怀,曾建民,邹泽昌,等.模压变形5052铝合金的显微组织与室温拉伸性能[J].机械工程材料,2016(4):1-4. YANG Kaihuai,ZENG Jianmin,ZOU Zechang,et al. Microstructure and tensile properties at room temperature of 5052 aluminum alloy processed by groove pressing deformation[J]. Materials for Mechanical Engineering,2016(4):1-4.
[19] DING Sheng,KHAN S A,YANAGIMOTO J. Constitutive descriptions and microstructure evolution of extruded A5083 aluminum alloy during hot compression[J]. Materials Science&Engineering A,2018,728(25):133-143.
[20] 李建光,施琪,曹结东. Johnson-Cook本构方程的参数标定[J].兰州理工大学学报,2012,38(2):164-167. LI Jianguang,SHI Qi,CAO Jiedong. Parameters calibration for Johnson-Cook constitutive equation[J]. Journal of Lanzhou University of Technology,2012,38(2):164-167.
[21] 赵士忠,冯超,车全伟,等. 6008铝合金冲击实验及其动态本构模型[J].成都大学学报,2019(4):339-345. ZHAO Shizhong,FENG Chao,CHE Quanwei,et al. Impact experiment and dynamic constitutive model of 6008 aluminum alloy[J]. Journal of Chengdu University,2019(4):339-345.
[22] 雷经发,许孟,刘涛,等.高应变率下6061铝合金力学性能及本构模型研究[J].兵器材料科学与工程,2019,42(1):74-78. LEI Jingfa,XU Meng,LIU Tao,et al. Mechanical properties and constitutive model of 6061 aluminum alloy at high strain rate[J]. Ordnance Material Science and Engineering,2019,42(1):74-78.