Dynamic Strength Design Methods of Ceramic Matrix Composite Structures: Current Status and Future Prospects

doi:10.3901/JME.2021.16.235

Abstract

Abstract: The progress on the dynamic strength design methods of ceramic matrix composite structures is reviewed. The application status of ceramic matrix composites is introduced, and the key factors in the strength design of structures are analysed, which include multi-scale modeling method, constitutive model, strength model and dynamic analysis. The single-scale and multi-scale methods are compared and the advantages of them are analysed. The frequently used constitutive models of ceramic matrix composites are introduced and it is pointed out that the dynamic analysis needs more appropriate models. The strength models of ceramic matrix composites are introduced, and it is pointed out that the main difficulty is the strength prediction of woven ceramic matrix composites under complex stresses. Then, the dynamic analysis methods of ceramic matrix composite structures, including modal analysis and transient simulation, are elaborated and compared. Finally, the development directions of the dynamic strength analysis are summarized.

Key words: ceramic matrix composites, multi-scale, constitutive model, dynamic, strength

CLC Number:

TG156

GAO Xiguang, HAN Dong, SONG Yingdong, ZHANG Sheng, YU Guoqiang. Dynamic Strength Design Methods of Ceramic Matrix Composite Structures: Current Status and Future Prospects[J]. Journal of Mechanical Engineering, 2021, 57(16): 235-247.

References

[1] 张宝诚. 航空发动机的现状和发展[J]. 沈阳航空工业学院学报,2008,25(3):6-10. ZHANG Baocheng. The current situation and development of aeroengine[J]. Journal of Shenyang Institute of Aeronautical Engineering,2008,25(3):6-10.
[2] GRADY J E. CMC technology advancements for gas turbine engine applications[C]//10th Pacific Rim Conference on Ceramic and Glass Technology (American Ceramic Society),San Diego,CA. 2013.
[3] DICARLO J A,YUN H M,MORSCHER G N,et al. Progress in SiC/SiC ceramic composite development for gas turbine hot-section components under NASA EPM and UEET programs[C]//Turbo Expo:Power for Land,Sea,and Air. 2002,36096:39-45.
[4] DICARLO J A,YUN H M,Morscher G N,et al. SiC/SiC composites for 1200℃ and above[M]//Handbook of ceramic composites. Boston:Springer,2005:77-98.
[5] ZOK F W. Ceramic-matrix composites enable revolutionary gains in turbine engine efficiency[J]. Am. Ceram. Soc. Bull.,2016,95(5):22-28.
[6] 张庆民,张万秋,王立波. 发动机涡轮Ⅱ级叶片断裂原因分析[J]. 失效分析与预防,2010,5(1):35-8. ZHANG Qingmin,ZHANG Wanqiu,WANG Libo. Analysis of the causes of the fracture of engine turbine Ⅱ stage blades[J]. Failure Analysis and Prevention,2010,5(1):35-38.
[7] MITAL S K,GOLDBERG R K,BONACUSE P J. Two-dimensional nonlinear finite element analysis of CMC microstructures[C]//Turbo Expo:Power for Land,Sea,and Air. 2011,54617:491-496.
[8] BORKOWSKI L,CHATTOPADHYAY A. Multiscale model of woven ceramic matrix composites considering manufacturing induced damage[J]. Composite Structures,2015,126:62-71.
[9] SHOJAEI A,LI G,FISH J,et al. Multi-scale constitutive modeling of ceramic matrix composites by continuum damage mechanics[J]. International Journal of Solids & Structures,2014,51(23-24):4068-4081.
[10] GAO Xiguang,LUO Piaoyang,YU Guoqiang,et al. Micro-XCT-based finite element method for prediction of elastic modulus of plane woven carbon fiber-reinforced ceramic matrix composites[J]. Journal of Composite Materials,2015,49(27):3373-3385.
[11] TOHIDI S D,ROCHA A M,ENGESSER B,et al. Micromechanical finite element parametric study of polyamide 6 based single polymer composites reinforced by woven textile structures[J]. Composite Structures,2019,225:111088.
[12] GHOSH S,LEE K,RAGHAVAN P. A multi-level computational model for multi-scale damage analysis in composite and porous materials[J]. International Journal of Solids & Structures,2001,38(14):2335-2385.
[13] SHARMA R,MAHAJAN P,MITTAL R K. Image-based finite element analysis of 3D-orthogonal carbon-carbon composite[C]//Proceedings of the World Congress on Engineering. 2010,2:1597-1601.
[14] 于皓. 基于XCT技术的陶瓷基复合材料导热系数预测及应用[D]. 南京:南京航空航天大学,2016. YU Hao. Prediction and application of thermal conductivity of ceramic matrix composites based on XCT technology[D]. Nanjing:Nanjing University of Aeronautics and Astronautics,2016.
[15] 朱宝城,高希光,宋迎东. 陶瓷基复合材料螺栓渐进损伤计算与强度预测[J]. 推进技术,2020,41(2):406-411. ZHU Baocheng,GAO Xiguang,SONG Yingdong. Progressive damage calculation and strength prediction of ceramic matrix composites bolt[J]. Journal of Propulsion Technology,2020,41(2):406-411.
[16] SCHMIDT S,BEYER S,KNABE H,et al. Advanced ceramic matrix composite materials for current and future propulsion technology applications[J]. Acta Astronautica,2004,55(3):409-420.
[17] YANG Chengpeng,JIAO Guiqiong,WANG Bo,et al. Damage-based failure theory and its application to 2D-C/SiC composites[J]. Composites Part A,2015,77:181-187.
[18] AUBARD X,LAMON J,ALLIX O. Model of the nonlinear mechanical behavior of 2D SiC-SiC chemical vapor infiltration composites[J]. Journal of the American Ceramic Society,2010,77(8):2118-2126.
[19] CHABOCHE J L,MAIRE J F. A new micromechanics based CDM model and its application to CMC's[J]. Aerospace Science & Technology,2002,6(2):131-145.
[20] GAO Xiguang,LI Long,SONG Yingdong. A temperature-dependent constitutive model for fiber-reinforced ceramic matrix composites and structural stress analysis[J]. International Journal of Damage Mechanics,2014,23(4):507-522.
[21] BLACKLOCK M,HAYHURST D. Multi-axial failure of ceramic matrix composite fiber tows[J]. Journal of Applied Mechanics,2011,78(3):2388-2399.
[22] CURTIN W A,AHN B K,TAKEDA N. Modeling brittle and tough stress-strain behavior in unidirectional ceramic matrix composites[J]. Acta Materialia,1998,46(10):3409-3420.
[23] SOLTI J,MALL S,ROBERTSON D. Modeling behavior of cross-ply ceramic matrix composites under quasi-static loading[J]. Applied Composite Materials,1995,2(5):265-292.
[24] OKABE T,TAKEDA N,KAMOSHIDA Y,et al. A 3D shear-lag model considering micro-damage and statistical strength prediction of unidirectional fiber-reinforced composites[J]. Composites Science and Technology,2001,61(12):1773-1787.
[25] JIANG Guoliang,PETERS K. A shear-lag model for three-dimensional,unidirectional multilayered structures[J]. International Journal of Solids and Structures,2008,45(14-15):4049-4067.
[26] PENG Zheqi,WANG Xin,WU Zhishen. A bundle-based shear-lag model for tensile failure prediction of unidirectional fiber-reinforced polymer composites[J]. Materials & Design,2020,196:109103.
[27] PENG Zheqi,WANG Xin,WU Zhishen. Multiscale strength prediction of fiber-reinforced polymer cables based on random strength distribution[J]. Composites Science and Technology,2020,196:108228.
[28] YANG Chengpeng,ZHANG Litong,WANG Bo,et al. Tensile behavior of 2D-C/SiC composites at elevated temperatures:Experiment and modeling[J]. Journal of the European Ceramic Society,2017,37(4):1281-1290.
[29] DENG Yong,LI Weiguo,WANG Xiaorong,et al. Temperature-dependent tensile strength model for 2D woven fiber reinforced ceramic matrix composites[J]. Journal of the American Ceramic Society,2018,101(11):5157-5165.
[30] CHEN Mingming,BLACKLOCK M,ZHANG Daxu,et al. Effects of stochastic tow waviness on stiffness and strength of plain-weave ceramic matrix composites[J]. Advances in Mechanical Engineering,2017,9(8):1-10.
[31] FAGIANO C,GENET M,BARANGER E,et al. Computational geometrical and mechanical modeling of woven ceramic composites at the mesoscale[J]. Composite Structures,2014,112(1):146-156.
[32] ISMAR H,SCHRÖTER F,STREICHER F. Modeling and numerical simulation of the mechanical behavior of woven SiC/SiC regarding a three-dimensional unit cell[J]. Computational Materials Science,2000,19(1-4):320-328.
[33] YEH H,KIM C H. The Yeh-Stratton criterion for composite materials[J]. Journal of Composite Materials,1994,28(10):926-939.
[34] YEH H,LEE R C. Simple analysis of the Yeh-Stratton failure criterion on composite materials[J]. Engineering Fracture Mechanics,1995,51(1):37-49.
[35] KIM C H,YEH H. Development of a new yielding criterion:The Yeh-Stratton criterion[J]. Engineering Fracture Mechanics,1994,47(4):569-582.
[36] TSAI S W,WU E M. A general theory of strength for anisotropic materials[J]. Journal of Composite Materials,1971,5(1):58-80.
[37] HOFFMAN O. The brittle strength of orthotropic materials[J]. Journal of Composite Materials,1967,1(2):200-206.
[38] HASHIN Z,ROTEM A. A fatigue failure criterion for fiber reinforced materials[J]. Journal of Composite Materials,1973,7(4):448-464.
[39] 杜善义,王彪. 复合材料细观力学[M]. 北京:科学出版社,1997. DU Shanyi,WANG Biao. Micromechanics of composite materials[M]. Beijing:Science Press,1997.
[40] 李龙彪,宋迎东,孙志刚. 单向陶瓷基复合材料单轴拉伸强度研究[J]. 航空动力学报,2010,25(10):2177-2187. LI Longbiao,SONG Yingdong,SUN Zhigang. Research on uniaxial tensile strength of unidirectional ceramic matrix composites[D]. Journal of Aeronautics and Dynamics,2010,25(10):2177-2187.
[41] 李龙彪. 长纤维增强陶瓷基复合材料疲劳损伤模型与寿命预测[D]. 南京:南京航空航天大学,2010. LI Longbiao. Fatigue damage model and life prediction of long fiber reinforced ceramic matrix composites[D]. Nanjing:Nanjing University of Aeronautics and Astronautics,2010.
[42] RICHTER H,PETERS P W M. Tensile strength distribution of all-oxide ceramic matrix mini-composites with porous alumina matrix phase[J]. Journal of the European Ceramic Society,2016,36(13):3185-3191.
[43] CALLAWAY E B,ZOK F W. Tensile response of unidirectional ceramic minicomposites[J]. Journal of the Mechanics and Physics of Solids,2020,138:103903.
[44] HILMASA A M,HENSON G,SINGHAL A,et al. In-situ observation of damage in unidirectional CMC laminates under tension[J]. Ceramics International,2020,46(9):13502-13510.
[45] 薛建刚,高希光,方光武,等. 2.5D C/SiC复合材料连续损伤本构模型[J]. 复合材料学报,2016,33(3):606-612. XUE Jiangang,GAO Xiguang,FANG Guangwu,et al. Continuous damage constitutive model for 2.5D C/SiC composites[J]. Acta Materiae Compositae Sinica,2016(3):606-612.
[46] 薛建刚,高希光,方光武,等. 针刺陶瓷基复合材料损伤本构模型及构件应力分析[J]. 航空动力学报,2016,31(10):2370-2375. XUE Jiangang,GAO Xiguang,FANG Guangwu,et al. Damage constitutive model and component stress analysis of needle-punched ceramic matrix composites[J]. Journal of Aerospace Power,2016,31(10):2370-2375.
[47] 管国阳,矫桂琼,张增光. 2D-C/SiC复合材料的宏观拉压特性和失效模式[J]. 复合材料学报,2005,22(4):81-85. GUAN Guoyang,JIAO Guiqiong,ZHANG Zengguang. Macroscopic tensile and compression characteristics and failure modes of 2D-C/SiC composites[J]. Acta Materiae Compositae Sinica,2005,22(4):81-85.
[48] 陶永强,矫桂琼,王波,等. 2D编织陶瓷基复合材料应力-应变行为的试验研究和模拟[J]. 固体力学学报,2010,31(3):258-268. TAO Yongqiang,JIAO Guiqiong,WANG Bo,et al. Stress-strain behavior in 2D weave ceramic matrix composite:analysis predictions[J]. Chinese Journal of Solid Mechanics,2010,31(3):258-268.
[49] SHI Duoqi,LIU Changqi,CHENG Zhen,et al. On the tensile behaviors of 2D twill woven SiO_2f/SiO₂ composites at ambient and elevated temperatures:mesoscale analysis and in situ experimental investigation[J]. Ceramics International,2021,47(9):12680-12694.
[50] 石多奇,景鑫,杨晓光. 三维四向编织CMCs拉伸性能及损伤演化数值预测[J]. 复合材料学报,2014,31(6):1543-1550. SHI Duoqi,JING Xin,YANG Xiaoguang. Numerical prediction of tensile properties and damage evolution of three dimensional-four directional braided CMCs[J]. Acta Materiae Compositae Sinica,2014,31(6):1543-1550.
[51] 潘文革,矫桂琼,管国阳,等. 三维编织C_f/SiC复合材料的拉伸破坏行为[J]. 硅酸盐学报,2005(2):160-163. PAN Wenge,JIAO Guiqiong,GUAN Guoyang,et al. Tensile damage behavior of three-dimensional braided C_f/SiC composites[J],Journal of the Chinese Ceramic Society,2005(2):160-163.
[52] MAZARS V,CATY O,COUÉGNAT G,et al. Damage investigation and modeling of 3D woven ceramic matrix composites from X-ray tomography in-situ tensile tests[J]. Acta Materialia,2017,140:130-139.
[53] IKARASHI Y,OGASAWARA T,AOKI T. Micromechanical model of time-dependent damage and deformation behavior for an orthogonal 3D-woven SiC/SiC composite at elevated temperature in vacuum[J]. Journal of the European Ceramic Society,2020,40(12):3887-3896.
[54] FLECK N A,BUDIANSKY B. Compressive failure of fibre composites due to microbuckling[M]//Inelastic deformation of composite materials. New York:Springer,1991:235-273.
[55] EVANS A G. The mechanical performance of fiber-reinforced ceramic matrix composites[J]. Materials Science and Engineering:A,1989,107:227-239.
[56] BANSAL N P,LAMON J. Ceramic matrix composites:materials,modeling and technology[M]. Hoboken:John Wiley & Sons,2014.
[57] LANKFORD J. The effect of hydrostatic pressure and loading rate on compressive failure of fiber-reinforced ceramic-matrix composites[J]. Composites Science & Technology,1994,51(4):537-543.
[58] 郭洪宝,谢骏. 2D-SiC/SiC复合材料损伤耦合力学行为[J]. 材料工程,2019,47(10):160-165. GUO Hongbao,XIE Jun. Damage coupling mechanical behaviors of 2D-SiC/SiC composite[J]. Journal of Materials Engineering,2019,47(10):160-165.
[59] PIRZADA T J,SINGH S,DE MEYERE R,et al. Effects of polymer infiltration processing (PIP) temperature on the mechanical and thermal properties of Nextel 312 fibre SiCO ceramic matrix composites[J]. Composites Part A:Applied Science and Manufacturing,2021,140:106197.
[60] 王波,矫桂琼,常岩军,等. 三维编织C/SiC复合材料剪切和压缩性能的试验研究[J]. 航空材料学报,2006(6):64-67. WANG Bo,JIAO Guiqiong,CHANG Yanjun,et al. Experimental study on the shear and compression properties of 3D braided C/SiC composites[J]. Journal of Aeronautical Materials,2006(6):64-67.
[61] XU Huajie,ZHANG Litong,CHENG Laifei. The yarn size dependence of tensile and in-plane shear properties of three-dimensional needled textile reinforced ceramic matrix composites[J]. Materials & Design,2015,67:428-435.
[62] WAN Fan,LIU Rongjun,WANG Yanfei,et al. In situ observation of compression damage in a 3D needled-punched carbon fiber-silicon carbide ceramic matrix composite[J]. Composite Structures,2019,210:189-201.
[63] RAJAN V P,ZOK F W. Matrix cracking of fiber-reinforced ceramic composites in shear[J]. Journal of the Mechanics and Physics of Solids,2014,73:3-21.
[64] 李潘,王波,甄文强,等. 二维编织SiC/SiC复合材料的剪切性能[J]. 机械强度,2014,36(5):691-693. LI Pan,WANG Bo,ZHEN Wenqiang,et al. Shear properties of two-dimensional braided SiC/SiC composites[J]. Mechanical Strength,2014,36(5):691-693.
[65] SOLTI J P,MALL S,ROBERTSON D D,et al. Modeling damage in unidirectional ceramic-matrix composites[J]. Composites Science and Technology,1995,54(1):55-66.
[66] LISSART N,LAMON J. Damage and failure in ceramic matrix minicomposites:Experimental study and model[J]. Acta Materialia,1997,45(3):1025-1044.
[67] CHATEAU C,GÉLÉBART L,BORNERT M,et al. Modeling of damage in unidirectional ceramic matrix composites and multi-scale experimental validation on third generation SiC/SiC minicomposites[J]. Journal of The Mechanics and Physics of Solids,2014:298-319.
[68] ZHANG Sheng,GAO Xiguang,CHEN Jing,et al. Strength model of the matrix element in SiC/SiC composites[J]. Materials & Design,2016,101:66-71.
[69] ZHANG Sheng,GAO Xiguang,CHEN Jing,et al. Effects of micro-damage on the nonlinear constitutive behavior of SiC/SiC minicomposites[J]. Journal of Ceramic Science and Technology,2016,7(4):341-348.
[70] ZHANG Sheng,GAO Xiguang,SONG Yingdong. In situ strength model for continuous fibers and multi-scale modeling the fracture of C/SiC composites[J]. Applied Composite Materials,2019,26(1):357-370.
[71] ZHANG Sheng,GAO Xiguang,DONG Hongnian,et al. In situ modulus and strength of carbon fibers in C/SiC composites[J]. Ceramics International,2017,43(9):6885-6890.
[72] HAN Xiao,GAO Xiguang,SONG Yingdong,et al. Effect of heat treatment on the microstructure and mechanical behavior of SiC/SiC mini-composites[J]. Materials Science and Engineering A-structural Materials Properties Microstructure and Processing,2019:94-104.
[73] 王翔,王波,矫桂琼,等. 平纹编织C/SiC材料复杂应力状态的力学行为试验研究[J]. 机械强度,2010,32(1):35-39. WANG Xiang,WANG Bo,JIAO Guiqiong,et al. Experimental investigation on plain woven C/SiC composites under complex stress states[J]. Journal of Mechanical Strength,2010,32(1):35-39.
[74] CAO Hengchu,THOULESS M D. Tensile tests of ceramic-matrix composites:Theory and experiment[J]. Journal of the American Ceramic Society,1990,73(7):2091-2094.
[75] 杨成鹏,矫桂琼,王波. 界面性能对陶瓷基复合材料拉伸强度的影响[J]. 无机材料学报,2009,24(5):919-923. YANG Chengpeng,JIAO Guiqiong,WANG Bo. Effects of interface properties on tensile strength of ceramic matrix composites[J]. Journal of Inorganic Materials,2009,24(5):919-923.
[76] 曾增,张庆茂,刘伟先,等. 单向C/SiC陶瓷基复合材料基体失效机制与强度预测[J]. 复合材料学报,2015,32(4):1075-1082. ZENG Zeng,ZHANG Qingmao,LIU Weixian,et al. Matrix failure mechanism and strength prediction of UD-C/SiC ceramic matrix composites[J]. Acta Materiae Compositae Sinica,2015,32(4):1075-1082.
[77] SHAO Jiaxing,LI Weiguo,DENG Yong,et al. Theoretical models and influencing factor analysis for the temperature-dependent tensile strength of ceramic fibers and their unidirectional composites[J]. Composite Structures,2017,164:23-31.
[78] LAMON J,THOMMERET B,PERCEVAULT C. Probabilistic-statistical approach to matrix damage and stress-Strain behavior of 2-D woven SiC/SiC ceramic matrix composites[J]. Journal of the European Ceramic Society,1998,18(13):1797-1808.
[79] DAGGUMATI S,SHARMA A,KASERA A,et al. Failure analysis of unidirectional ceramic matrix composite lamina and cross-ply laminate under fiber direction uniaxial tensile load:Cohesive zone modeling and brittle fracture mechanics approach[J]. Journal of Materials Engineering and Performance,2020:1-12.
[80] MEYER P,WAAS A M. Mesh-objective two-scale finite element analysis of damage and failure in ceramic matrix composites[J]. Integrating Materials and Manufacturing Innovation,2015,4(1):63-80.
[81] WANG Liang,WU Jiayi,CHEN Chuanyong,et al. Progressive failure analysis of 2D woven composites at the meso-micro scale[J]. Composite Structures,2017,178:395-405.
[82] ZHOU Lichuan,CHEN Mingwei,LIU Chuang,et al. A multi-scale stochastic fracture model for characterizing the tensile behavior of 2D woven composites[J]. Composite Structures,2018,204:536-547.
[83] SHI Duoqi,TENG Xuefeng,JING Xin,et al. A multi-scale stochastic model for damage analysis and performance dispersion study of a 2.5 D fiber-reinforced ceramic matrix composites[J]. Composite Structures,2020,248:112549.
[84] SKINNER T,RAI A,CHATTOPADHYAY A. Multiscale ceramic matrix composite thermomechanical damage model with fracture mechanics and internal state variables[J]. Composite Structures,2020,236:111847.
[85] YANG Zhengmao,YAN Han. Multiscale modeling and failure analysis of an 8-harness satin woven composite[J]. Composite Structures,2020,242:112186.
[86] 惠新育,许英杰,张卫红,等. 平纹编织SiC/SiC复合材料多尺度建模及强度预测[J]. 复合材料学报,2019,36(10):2380-2388. HUI Xinyu,XU Yingjie,ZHANG Weihong,et al. Multi-scale modeling and strength prediction of plain weave SiC/SiC composites[J]. Acta Materiae Compositae Sinica,2019,36(10):2380-2388.
[87] ZHANG Daxu,HAYHURST D R. Stress-strain and fracture behaviour of 0/90 and plain weave ceramic matrix composites from tow multi-axial properties[J]. International Journal of Solids and Structures,2010,47(21):2958-2969.
[88] GAO Xiguang,DONG Hongnian,ZHANG Sheng,et al. Multi-scale modeling and experimental study of the strength of plain-woven SiC/SiC composites[J]. Applied Composite Materials,2019,26(5):1333-1348.
[89] 孔春元,孙志刚,高希光,等. 2.5维C/SiC复合材料经向拉伸性能[J]. 复合材料学报,2012(2):192-198. KONG Chunyuan,SUN Zhigang,GAO Xiguang,et al. Warp tensile properties of 2.5-dimensional C/SiC composites[J]. Acta Materiae Compositae Sinica,2012(2):192-198.
[90] FUTAKAWA M,TANABE Y,WAKUI T,et al. Dynamic effect on strength in SiCf/SiCm composite[J]. International Journal of Impact Engineering,2001,25(1):29-40.
[91] LIU Mingshuang,LI Yulong,XU Fei,et al. Dynamic compressive mechanical properties and a new constitutive model of 2D-C/SiC composites[J]. Materials Science and Engineering:A,2008,489(1-2):120-126.
[92] 汤彬,孙志刚,高希光,等. 单向陶瓷基复合材料阻尼计算方法[J]. 航空动力学报,2010,25(10):2217-2222. TANG Bin,SUN Zhigang,GAO Xiguang,et al. Damping calculation method for unidirectional ceramic matrix composites[J]. Journal of Aerospace Power,2010,25(10):2217-2222.
[93] 胡殿印,曾雨琪,张龙,等. 二维编织SiC/SiC陶瓷基复合材料宏观弹性常数预测及模态试验研究[J]. 推进技术,2018,39(2):465-472. HU Dianyin,ZENG Yuqi,ZHANG Long,et al. Prediction of macro-elastic constants and modal test of two-dimensional braided SiC/SiC ceramic matrix composites[J]. Journal of Propulsion Technology,2018,39(2):465-472.
[94] 徐雅洁,高希光,张华军,等. 损伤对平纹编织陶瓷基复合材料梁振动特性影响的试验研究[J/OL]. 推进技术:1-7[2021-02-05]. https://doi.org/10.13675/j.cnki.tjjs.200010. XU Yajie,GAO Xiguang,ZHANG Huajun,et al. Experimental study on the influence of damage on the vibration characteristics of plain weave ceramic matrix composite beams[J/OL]. Propulsion Technology:1-7[2021-02-05]. https://doi.org/10.13675/j.cnki.tjjs.200010.
[95] BIRMAN V,BYRD L W. Matrix cracking in transverse layers of cross-ply beams subjected to bending and its effect on vibration frequencies[J]. Composites Part B:Engineering,2001,32(1):47-55.
[96] BIRMAN V,BYRD L W. Damping in ceramic matrix composites with matrix cracks[J]. International Journal of Solids and Structures,2003,40(16):4239-4256.
[97] GAO Xiguang,SONG Yingdong,SUN Zhigang,et al. Numerical simulation of dynamic response of fiber reinforced ceramic matrix composite beam with matrix cracks using multiscale modeling[J]. Chinese Journal of Aeronautics,2010,23(5):537-548.
[98] GAO Xiguang,HAN Dong,CHEN Jing,et al. Numerical and experimental study on the nonlinear dynamic response of a ceramic matrix composites beam[J]. Ceramics International,2018,44(6):6223-6231.
[99] HÖNIG S,KOCH D,WEBER S,et al. Evaluation of dynamic modulus measurement for C/C-SiC composites at different temperatures[J]. International Journal of Applied Ceramic Technology,2019,16(5):1723-1733.
[100] HAN Dong,GAO Xiguang,ZHANG Huajun,et al. Dynamic and fluid-structure interaction simulations of a ceramic matrix composite plate[J]. Composite Structures,2020,243:112177.