Simulation and Experimental Research on Grinding Surface Topography of Spiral Bevel Gear

doi:10.3901/JME.2019.03.191

Abstract

Abstract: The spiral bevel gears are widely used in the transmission systems of heavy vehicles and military aircraft. As the last step of gear machining, it would affect the service life and reliability of heavy duty vehicle transmission system if the surface topography fails to meet the requirements. Thus, the prediction and analysis of the grinding surface topography of spiral bevel gears are realized through the modelling and simulation of abrasive particle trajectory and wheel surface topography. The experiment of spiral bevel gear grinding is designed to investigate the influence of different grinding parameters on the surface topography. The results show that the increase of grinding speed, generating speed and grain grit are beneficial to obtain fine surface morphology. The surface morphology of spiral bevel gear obtained by simulation and experiment is basically the same, which shows that the model can effectively analyze the production process of spiral bevel gear grinding surface and the influence mechanism of various grinding parameters.

Key words: grinding, simulation, spiral bevel gear, surface topography

CLC Number:

TG580

LIANG Zhiqiang, HUANG Diqing, ZHOU Tianfeng, LI Hongwei, LIU Xinli, WANG Xibin, ZHANG Guozhen, WANG Hongchen. Simulation and Experimental Research on Grinding Surface Topography of Spiral Bevel Gear[J]. Journal of Mechanical Engineering, 2019, 55(3): 191-198.

References

[1] 汤中连,亓秀梅,高创宽. 齿面粗糙度对齿轮传动接触疲劳应力的影响[J]. 润滑与密封,2011,36(4):53-57. TANG Zhonglian,QI Xiumei,GAO Chuangkuan. Influence of tooth face roughness on gearing contact fatigue stress[J]. Lubrication Engineering,2011,36(4):53-57.
[2] MALKIN S. Grinding technology:theory and applications of machining with abrasives[M]. Chichester:Ellis Horwood,1989.
[3] CHEN X,ROWE W. Analysis and simulation of the grinding process. Part I:Generation of the grinding wheel surface[J]. International Journal of Machine Tools & Manufacture,1996,36(8):871-882.
[4] BUTLER D,BLUNT L,SEE B,et al. The characterisation of grinding wheels using 3D surface measurement techniques[J]. Journal of Materials Processing Technology,2002,127(2):234-237.
[5] ZHOU X,XI F. Modeling and predicting surface roughness of the grinding process[J]. International Journal of Machine Tools & Manufacture,2002,42(8):969-977.
[6] NGUYEN T,BULTER D. Simulation of precision grinding process,Part 1:Generation of the grinding wheel surface[J]. International Journal of Machine Tools & Manufacture,2005,45(11):1321-1328.
[7] 陈东祥,田延岭. 超精密磨削加工表面形貌建模与仿真方法[J]. 机械工程学报,2010,46(13):186-191. CHEN Dongxiang,TIAN Yanling. Modeling and simulation methodology of the machined surface in ultra-precision grinding[J]. Journal of Mechanical Engineering,2010,46(13):186-191.
[8] 巩亚东,刘月明,仇健,等. 点磨削工件微观形貌仿真与试验研究[J]. 机械工程学报,2012,48(17):165-171. GONG Yadong,LIU Yueming,QIU Jian,et al. Research on simulation and experiment for workpiece micro-surface in point grinding[J]. Journal of Mechanical Engineering,2012,48(17):165-171.
[9] 吕长飞,李郝林. 外圆磨削砂轮形貌仿真与工件表面粗糙度预测[J]. 中国机械工程,2012,23(6):666-670. LÜ Changfei,LI Haolin. Simulation of wheel topography and forecasting of roughness in cylindrical grinding[J]. China Mechanical Engineering,2012,23(6):666-670.
[10] 曾韬. 螺旋锥齿轮设计与加工[M]. 哈尔滨:哈尔滨工业大学出版社,1989. ZENG Tao. Spiral bevel gear design and manufacture[M]. Harbin:Harbin Institute of Technology Press,1989.
[11] AGARWAL S,RAO P. Modeling and prediction of surface roughness in ceramic grinding[J]. International Journal of Machine Tools & Manufacture,2010,50(12):1065-1076.
[12] DOMAN D,WARKENTIN A,BAUER R. A survey of recent grinding wheel topography models[J]. International Journal of Machine Tools & Manufacture,2006,46(3):343-352.

[1]	SU Zhipeng, LIANG Zhiqiang, LI Juan, WANG Fei, WEI Zhengyi, LIU Yuehong, KIM Yoomi, MA Yue, YIN Zhen, WANG Xibin. Experimental Research on Ultrasonic Spiral Assisted Milling and Grinding of Titanium Alloy Micro Groove [J]. Journal of Mechanical Engineering, 2024, 60(9): 5-12.
[2]	YIN Zhen, ZHANG Kun, DAI Chenwei, CHENG Jingcai, XUN Hailong, LI Hua. Research on Wheel Wear and Grinding Performance of Elliptical Ultrasonic Vibration Assisted Grinding SiC Ceramics [J]. Journal of Mechanical Engineering, 2024, 60(9): 57-74.
[3]	LIANG Fengshuang, WU Mingyang, LIU Lifei. Research on Mechanism and Subsurface Damage Characteristics of SiC Ultrasonic Grinding Based on Material Impact Characteristics [J]. Journal of Mechanical Engineering, 2024, 60(9): 75-85.
[4]	WU Jie, DANG Jiaqiang, LI Yugang, CHEN Dong, AN Qinglong, WANG Haowei, CHEN Ming. Study on Strengthening Mechanism and Anti-fatigue Performance of Stress Ultrasonic Rolling [J]. Journal of Mechanical Engineering, 2024, 60(9): 127-136.
[5]	HAO Mingwu, YAO Peng, ZHOU Jiabin, LI Yueming, LIANG Shitong, CHU Dongkai, HUANG Chuanzhen. The Influencing Factors of Tangential Dressing of Bronze-bond Diamond Grinding Wheel by Picosecond Pulsed Laser [J]. Journal of Mechanical Engineering, 2024, 60(9): 229-240.
[6]	XIAO Guijian, LIU Zhenyang, HE Yi, LIU Gang, DENG Zhongcai. Laser-assisted CBN Belt Grinding of TC4 Titanium Alloy for Material Removal Behavior and Surface Integrity Study [J]. Journal of Mechanical Engineering, 2024, 60(9): 241-253.
[7]	WANG Xiaoming, LI Changhe, YANG Min, ZHANG Yanbin, LIU Mingzheng, GAO Teng, CUI Xin, WANG Dazhong, CAO Huajun, CHEN Yun, LIU Bo. Research Progress on the Physical Mechanism of Minimum Quantity Lubrication Machining with Nano-biolubricants [J]. Journal of Mechanical Engineering, 2024, 60(9): 286-322.
[8]	CUI Xin, LI Changhe, ZHANG Yanbin, YANG Min, ZHOU Zongming, LIU Bo, WANG Chunjin. Force Model and Verification of Magnetic Traction Nanolubricant Grinding [J]. Journal of Mechanical Engineering, 2024, 60(9): 323-337.
[9]	GUAN Jiju, ZHU Zhengbing, XU Zhengya, LUAN Zhiqiang, XU Xuefeng. Dual Synergistic Lubrication Mechanism of Nano-fluid and Grinding Wheel Prepared by CNTs@T321 Nano-capsules [J]. Journal of Mechanical Engineering, 2024, 60(9): 351-363.
[10]	HE Zhe, HUANG Xinchun, SONG Yihui, SHI Yaoyao, ZHANG Zhaoqing, SHI Kaining. Study on the Evolution of Surface Integrity of DD6 Single Crystal Super Alloy by Grinding Shot Peening Based on the Effect of Service Temperature [J]. Journal of Mechanical Engineering, 2024, 60(9): 410-420.
[11]	DENG Jianxin, YUAN Bangyi, HUANG Qiulin, DING Dukun, XIN Manyu, LIU Guangming. Review on the Key Technologies of Complex Surfaces Polishing Based on Robots [J]. Journal of Mechanical Engineering, 2024, 60(7): 1-21.
[12]	CHEN Shouan, XIAO Ke, CHENG Gong, HAN Yanfeng. Friction and Contact Properties of Tooth Surfaces Considering Surface Topography under Mixed Lubrication [J]. Journal of Mechanical Engineering, 2024, 60(7): 184-194.
[13]	DING Wenfeng, ZHAO Junshuai, ZHANG Honggang, ZHAO Biao, SI Wenyuan, SONG Qiang, HUANG Qingfei. Advances in High Efficiency Precision Grinding and Surface Integrity Control Technology for Gears [J]. Journal of Mechanical Engineering, 2024, 60(7): 350-373.
[14]	YANG Weifeng, LIU Jianhua, Lü Naijing, MA Jiangtao. Method of Cable Dynamic Simulation Based on PBD [J]. Journal of Mechanical Engineering, 2024, 60(6): 21-31,57.
[15]	CHAI Yiyang, ZHANG Lele, DOU Weiyuan, ZHANG Haifeng. Parallel NSGA-III Based Multi-objective Optimization for Side Wall Section Size of High-speed Train Car-body [J]. Journal of Mechanical Engineering, 2024, 60(6): 321-333.