Research on Multi-objective Optimization Redesign Method for Used Mechanical Equipment Based on Analytical Target Cascading

doi:10.3901/JME.2019.03.147

Abstract

Abstract: In order to solve complicated coupled problems between system and components, a multi-objective optimization redesign method based on analytical target cascading (ATC) are presented. On the basis of the damage condition, remaining service life information and demand information, the range of remanufacturing cost, energy consumption, and material consumption can be obtained, aiming to restrict redesign objectives. An ATC method is presented to cooperation system redesign objectives and components redesign objectives. A multi-optimization model is established including remanufacturing cost, energy consumption and material consumption. The adapt teaching-learning-based optimization (A-TLBO) method is adopted to solve this model. Finally, a used machine tool (model C6140) is taken as an example to validate the feasibility and effectiveness of the proposed method.

Key words: adaptive adjustment strategy, analytical target cascading, multi-objective optimization, redesign, teaching and learning based optimization

CLC Number:

TG156

WANG Han, JIANG Zhigang, ZHANG Hua, WANG Yan. Research on Multi-objective Optimization Redesign Method for Used Mechanical Equipment Based on Analytical Target Cascading[J]. Journal of Mechanical Engineering, 2019, 55(3): 147-153.

References

[1] 杜彦斌. 退役机床再制造评价与再设计方法研究[D]. 重庆:重庆大学,2012. DU Yanbing. Research on remanufacturing evaluation and redesign method for retired machine tools[D]. Chongqing:Chongqing University,2012.
[2] DU Y,CAO H,CHEN X,et al. Reuse-oriented redesign method of used products based on axiomatic design theory and QFD[J]. Journal of Cleaner Production,2013,39(1):79-86.
[3] ZWOLINSKI P,LOPEZ-ONTIVEROS M A,Brissaud D. Integrated design of remanufacturable products based on product profiles[J]. Journal of Cleaner Production,2006,14(15):1333-1345.
[4] 宋守许,冯艳,柯庆镝,等. 基于寿命匹配的零部件再制造优化设计方法[J]. 中国机械工程,2015,26(10):1323-1329. SONG Shouxu,FENG Yan,KE Qingdi,et al. Component optimization design for remanufacturing based on life matching[J]. China Mechanical Engineering,2015,26(10):1323-1329.
[5] CAO H,CHEN X,XU L,et al. A reuse-oriented redesign method of used machine tool based on matter-element theory[J]. International Journal of Precision Engineering & Manufacturing,2014,15(5):921-928.
[6] KIM H M. Target cascading in optimal system design[J]. Journal of Mechanical Design,2003,125(3):474-480.
[7] 张伟,刘仲谦,张纾,等. 绿色制造与再制造技术研究与发展[J]. 中国表面工程,2006,19(z1):76-81. ZHANG Wei,LIU Zhongqian,ZHANG Shu,et al. Study and development of green manufacturing and remanufacturing[J]. China Surface Engineering,2006,19(z1):76-81.
[8] WANG H,JIANG Zhigang,ZHANG Xugang,et al. A fault feature characterization based method for remanufacturing process planning optimization[J]. Journal of Cleaner Production,2017,161:708-719.
[9] 李聪波,李玲玲,曹华军,等. 废旧零部件不确定性再制造工艺时间的模糊学习系统[J]. 机械工程学报,2013,49(15):137-146. LI Congbo,LI Lingling,CAO Huajun,et al. Fuzzy learning system for uncertain remanufacturing process time of used components[J]. Journal of Mechanical Engineering,2013,49(15):137-146.
[10] 张旭刚,张华,江志刚,等. 基于剩余使用寿命评估的再制造方案决策模型及应用[J]. 机械工程学报,2013,49(7):51-57. ZHANG Xugang,ZHANG Hua,JIANG Zhigang,et al. Remanufacturing scheme design decision model and application based on remaining useful life estimation[J]. Journal of Mechanical Engineering,2013,49(7):51-57.
[11] 高一聪,冯毅雄,谭建荣,等. 面向寿命终结阶段的机械产品设计绿色多准则优化[J]. 机械工程学报,2011,47(23):144-151. GAO Yicong,FENG Yixiong,TAN Jianrong,et al. Dynamic characteristics of multi-stage planetary gears of shield tunneling machine based on planet mesh phasing analysis[J]. Journal of Mechanical Engineering,2011,47(23):144-151.
[12] 陈友玲,谢淑红,李祎. 基于条件属性依赖度的配置产品装配时间估算[J]. 计算机工程与应用,2016,52(3):236-240. CHEN Youling,XIE Shuhong,LI Yi. Assembly time estimation technique of configuration products based on dependency of attributes[J]. Computer Engineering and Applications,2016,52(3):236-240.

[1]	CHAI Yiyang, ZHANG Lele, DOU Weiyuan, ZHANG Haifeng. Parallel NSGA-III Based Multi-objective Optimization for Side Wall Section Size of High-speed Train Car-body [J]. Journal of Mechanical Engineering, 2024, 60(6): 321-333.
[2]	SU Jiantao, DONG Shaohua, ZHU Shimin. Research on Machine Fault Rescheduling Problem of Multi Objective Hybrid Flow Shop Based on Intelligent Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(4): 438-448.
[3]	TANG Hongtao, WEI Shupeng, LI Xixing, LEI Deming, WANG Kaipu. Coordinated Optimization of Heterogeneous Vehicle Allocation and Route Considering Queuing Factors [J]. Journal of Mechanical Engineering, 2024, 60(4): 458-472.
[4]	LÜ Liye, LU Yujun, WANG Shuo, LIU Yin, LI Kunpeng, SONG Xueguan. Survey and Prospect of Surrogate Model Technique and Application [J]. Journal of Mechanical Engineering, 2024, 60(3): 254-281.
[5]	WANG Xu, JIANG Xingyu, YANG Guozhe, SUN Meng, YU Shenhong, BI Kaihang, ZHAO Rizheng, LIU Weijun. Research on Optimization of Human-Machine Interface Layout of Laser Cleaning Equipment Based on PSO-SSA [J]. Journal of Mechanical Engineering, 2024, 60(20): 372-387.
[6]	XIONG Rui, LI Zhengyang, YAN Runbo, YANG Ruixin. Research on All-climate Self-heating Lithium-ion Battery and Low Temperature Extreme Heating Strategy [J]. Journal of Mechanical Engineering, 2024, 60(18): 247-257.
[7]	LIANG Xu, ZHANG Jianyong, LI Guotao, SU Tingting, HE Guangping, HOU Zengguang. Redundant Parallel Mechanism for Fracture Reduction Surgery: Design, Modeling and Performance Analysis [J]. Journal of Mechanical Engineering, 2024, 60(17): 133-146.
[8]	WANG Hongliang, YONG Jianyu, PI Dawei, XIE Boyuan, WANG Erlie, WANG Xianhui. Multi-vehicle Formation Switching Trajectory Planning Based on Bézier Curve and Multi-objective Optimization Method [J]. Journal of Mechanical Engineering, 2024, 60(16): 270-279.
[9]	ZHAO Feng, HU Weifei, LI Guang, DENG Xiaoyu, LIU Zhenyu, GUO Yunfei, TAN Jianrong. Multi-objective Optimization Design Method Based on a Hybrid Metric Adaptive Sampling Surrogate Model [J]. Journal of Mechanical Engineering, 2024, 60(13): 81-91.
[10]	WANG Juan, LIU Meihong, ZHU Shixing, CHEN Wenbo, LI Yuxian, SUN Junfeng. Multi-objective Hybrid Teaching-learning-based Optimization Method for Structural Parameters of Finger Seal [J]. Journal of Mechanical Engineering, 2023, 59(9): 157-170.
[11]	ZHANG Xin-tong, ZHANG Cheng-ming, LI Li-yi, FU Peng-rui. Design Method of High Efficiency Lightweight Permanent Magnet Synchronous Motor for Electric Propulsion [J]. Journal of Mechanical Engineering, 2023, 59(8): 181-195.
[12]	LIU Weijun, SUO Yingqi, JIANG Xingyu, TIAN Zhiqiang, ZHANG Dong, YANG Guozhe, WANG Hongyue, HAN Qingbing. Low-carbon Modeling and Process Parameter Optimization for Laser Cleaning Process [J]. Journal of Mechanical Engineering, 2023, 59(7): 276-294.
[13]	WANG Yaliang, GAO Kanghong, FAN Xinyu, JIN Shousong. Uncertainty-oriented Workshop Layout and Scheduling Integration Optimization [J]. Journal of Mechanical Engineering, 2023, 59(5): 235-246.
[14]	XU Jiaqun, CHEN Tengyu. Current Loop Parameters Design for PMSM with Filter Based on Multi-objective Optimization Method [J]. Journal of Electrical Engineering, 2023, 18(3): 164-174.
[15]	LIU Yu, WAN Xinming, XU Wei, SHI Liangliang, BAI Zhonghao. Research on Intelligent Reconstruction Method for Powered Two-wheeler Accident Based on Automatic Simulation and NSGA-Ⅱ Algorithm [J]. Journal of Mechanical Engineering, 2023, 59(24): 197-208.