Research and Application of Health Management Method of Large Oil Storage Tank

doi:10.3901/JME.2017.16.125

Abstract

Abstract: With the increase of oil reserves and the development of petrochemical industry in China, the volume and quantity of large oil storage tanks are increasing, the safety in operation of these tanks is of great importance. The large mechanical system health management theory is applied to the large oil storage tank. The concept, procedure and detailed plan of the health management of large oil storage tanks is proposed. According to the characteristics of large oil storage tanks, the health management indicator system is developed. The health inspection scheme is raised, which is timely adjusted according to the health assessment results. Health risks, health indicators and detection techs are introduced. The health assessment method is proposed, to estimate the health status and to forecast the health trends. And the health status based health recovery scheme is raised. According to the health indicators and health assessment results, the health management method of large oil storage tank uses the current inspection and maintenance techs synthetically, to ensure the safe operation of the tanks in the most economical way. The preliminary application of the health management method is carried out, the effectiveness of the health management method is verified. Finally, the key requirements for the further development of the health management methods of large oil storage tank are summarized.

Key words: health assessment, health forecast, health management, large oil storage tank

CLC Number:

E07
TH17

WANG Baoxuan, SHEN Gongtian, YAN He, WU Xinjun. Research and Application of Health Management Method of Large Oil Storage Tank[J]. Journal of Mechanical Engineering, 2017, 53(16): 125-133.

References

[1] 田春荣. 2015年中国石油进出口状况分析[J]. 国际石油经济, 2016, 24(3):44-53. TIAN Chunrong. China's 2015 oil imports and exports[J]. International Petroleum Economics, 2016, 24(3):44-53.
[2] 杨子健, 李威. 中国石油储备体系的发展现状与建议[J]. 国际石油经济, 2015, 23(9):69-77. YANG Zijian, LI Wei. Development situation and needs of China's petroleum reserve system[J]. International Petroleum Economics, 2015, 23(9):69-77.
[3] 蒋晓武,周良锋,周领. 石油储罐火灾案例与安全现状调查分析[J]. 安全、健康和环境, 2016, 16(3):29-32. JIANG Xiaowu, ZHOU Liangfeng, ZHOU Ling. The investigation and analysis of oil tank fire case and present situation[J]. Safety Health & Environment, 2016, 16(3):29-32.
[4] Board BMⅡ. The buncefield incident, 11 december 2005:the final report of the major incident investigation board[M]. Great Britain:Health and Safety Executive, 2008.
[5] GROSS J L, SMITH J H, WRIGHT R N. Ashland tank-collapse investigation[J]. Journal of Performance of Constructed Facilities, 1989, 3(3):144-162.
[6] 沈国光,沈海涛,沈显东,等. 国内石油化工行业储罐事故统计分析及对策研究[J]. 石油化工安全环保技术, 2016, 32(3):35-39. SHEN Guoguang, SHEN Haitao, SHEN Xiandong, et al. Statistical analysis on the storage tank accidents in domestic petrochemical industry and research on the countermeasures[J]. Petrochemical safety and environment protection technology, 2016, 32(3):35-39.
[7] CHANG J I, LIN C C. A study of storage tank accidents[J]. Journal of Loss Prevention in the Process Industries, 2006, 19(1):51-59.
[8] 吴龙平,明斐卿,罗丽华,等. 国内外大型储罐的设计标准对比[J]. 油气储运, 2010, 29(12):933-936. WU Longping, MING Feiqing, LUO Lihua, et al. Design standards for large-scale storage tanks worldwide[J]. Oil & gas storage transportation, 2010, 29(12):933-936.
[9] 刘佳,袁玲,唐悦影,等. 中美大型储罐设计标准抗震计算对比[J]. 油气储运, 2013, 32(4):421-425. LIU Jia, YUAN Ling, TANG Yueying, et al. Comparison between Chinese and American design standards of anti-seismic calculation for large-scale storage tank[J]. Oil & gas storage transportation, 2013, 32(4):421-425.
[10] 于清,王一军,许跃新,等. 大型储罐设计技术的发展[J]. 新疆石油天然气, 2006, 2(4):73-75. YU Qing, WANG Yijun, XU Yuexin, et al. The development of design technology of large storage tanks[J]. Xinjiang Oil & Gas, 2006, 2(4):73-75.
[11] CHEN Z P, SUN B, YU C L, et al. Finite-element analysis of liquid-storage tank foundations using settlement difference as boundary condition[J]. Journal of Process Mechanical Engineering, 2009, 223(4):225-231.
[12] 陈志平,葛颂,沈建民,等. 大型原油储罐有限元分析建模的新方法[J]. 浙江大学学报, 2006, 40(6):977-981. CHEN Zhiping, GE Song, SHEN Jianmin, et al. New modeling method for finite element analysis of large oil storage tanks[J]. Journal of Zhejiang University, 2006, 40(6):977-981.
[13] 沈功田. 声发射检测技术及应用[M]. 科学出版社, 2015. SHEN Gongtian. Acoustic emission testing technology and application[M]. Beijing:Science Press, 2015.
[14] LIU Z, KANG Y, WU X, et al. Study on local magnetization of magnetic flux leakage testing for storage tank floors[J]. Insight-Non-Destructive Testing and Condition Monitoring, 2003, 45(5):328-331.
[15] SHEN W, GU J, SHEN Y. Proposed wall climbing robot with permanent magnetic tracks for inspecting oil tanks v[C]//Proceedings of the IEEE International Conference Mechatronics and Automation,IEEE,2005,4:2072-2077.
[16] 王勇,沈功田,李邦宪,等. 压力容器无损检测——大型常压储罐的无损检测技术[J]. 无损检测, 2005, 27(9):487-490. WANG Yong, SHEN Gongtian, LI Bangxian, et al. Nondestructive testing of pressure vessels:Nondestructive testing technique for large atmospheric storage tanks[J]. Nondestructive testing, 2005, 27(9):487-490.
[17] 郭冰,沈功田,张万岭,等. 基于风险的检验在大型常压储罐群的应用[J]. 压力容器, 2010, 27(4):55-60. GUO Bing, SHEN Gongtian, ZHANG Wanling, et al. Application of RBI technology in atmospheric storage tanks[J]. Pressure vessel, 2010, 27(4):55-60.
[18] SHUAI J, HAN K, XU X. Risk-based inspection for large-scale crude oil tanks[J]. Journal of Loss Prevention in the Process Industries, 2012, 25(1):166-175.
[19] 沈功田, 刘渊. 大型机械系统的健康管理理论研究及应用设想[J]. 机械工程学报, 2017, 53(16):1-9. SHEN Gongtian, LIU Yuan. Research and Application assumptions of large mechanical system health management theory[J]. Journal of Mechanical Engineering, 2017, 53(16):1-9.
[20] 朱荣改,张洪林,朱丹. 大型油气储罐的结构型式与变化趋势[J]. 石油规划设计, 2001, 12(5):31-33. ZHU Ronggai, ZHANG Honglin, ZHU Dan. Structure and change trend of large oil and gas storage tanks[J]. Petroleum Planning & Engineering, 2001, 12(5):31-33.
[21] 李光海. 常压储罐检验检测技术[J]. 无损检测, 2010, 32(7):509-512. LI Guanghai. Inspection technology of atmospheric storage tanks[J]. Nondestructive Testing, 2010, 32(7):509-512.
[22] 沈功田, 胡斌. 大型承压设备不停机电磁无损检测技术及应用[J]. 中国特种设备安全, 2016, 32(1):6-12. SHEN Gongtian, HU Bin. The on-line electromagnetic non-destructive testing technology for large pressure equipment and its application[J]. China Special Equipment Safety, 2016, 32(1):6-12.
[23] 袁朝庆,刘彦,王志远,等. 基于光纤传感技术监测大型储罐运行状态[J]. 无损检测, 2015, 37(3):14-18. YUAN Chaoqing, LIU Yan, WANG Zhiyuan, et al. Monitoring running states for large storage tank based on optical fiber sensing technology[J]. Nondestructive Testing, 2015, 37(3):14-18.
[24] 张文新. 三维激光扫描技术在大型油罐罐体尺寸测量中的应用研究[J]. 兰州工业学院学报, 2015, 22(1):63-67. ZHANG Wenxin. The application of 3D laser scanning technology to large oil tank size measuring[J]. Journal of Lanzhou Institute of Technology, 2015, 22(1):63-67.
[25] 石慧. 机械系统的剩余寿命预测及预防性维修决策研究[D]. 太原:太原科技大学, 2015. SHI Hui. The prediction of remaining useful life and preventive maintenance decision for mechanical system[D]. Taiyuan:Taiyuan University of Technology, 2015.
[26] BOUSDEKIS A, MAGOUTAS B, APOSTOLOU D, et al. Review, analysis and synthesis of prognostic-based decision support methods for condition based maintenance[J]. Journal of Intelligent Manufacturing, 2015, 20:1-14.