Relation and Influence of All Kinds of Unbalance Torques of Three Degrees of Freedom Air-bearing Spacecraft Simulator Caused by Gravity

doi:10.3901/JME.2015.21.007

Abstract

Abstract:

To improve three degrees of freedom air-bearing simulation accuracy and reduce the influence of unbalance torque caused by gravity, a method for calculating and compensating elastic unbalance torque is proposed. After computational model of static, plastic, gravity gradient and total unbalance torque being established, the relation and influence among all kinds of unbalance torque cause by gravity are analysis. It is discovered by contrast that static unbalance torque plays an important role when the platform mass center is far away from the rotation center. With the mass center approaching to rotation center, elastic unbalance torque is gradually becoming the main factor affecting the air-bearing platform balance. Then closing the distance between mass center and rotation center has nothing to do on reducing the unbalance torque, which shows that elastic unbalance torque is the main limiting factor for improving platform accuracy. The principle for mutual compensation between static unbalance torque and elastic unbalance torque is proposed and the compensation algorithm with automatic balancing system is provided. Experimental results have demonstrated application of the compensation method is an important channel for reducing unbalance torque.

Key words:

font-size: 9pt, font-size: 9pt, font-size: 9pt, layout-grid-mode: char" class="MsoNormal">mso-ascii-font-family: 'Times New Roman', mso-ascii-font-family: 'Times New Roman', mso-ascii-font-family: 'Times New Roman', mso-bidi-font-size: 12.0pt, mso-bidi-font-size: 12.0pt, mso-bidi-font-size: 12.0pt, mso-bidi-font-size: 12.0pt" lang="EN-US">computation, mso-bidi-font-size: 12.0pt" lang="EN-US">satellitemso-bidi-font-size: 12.0pt" lang="EN-US">three-axis air-bearing simulationmso-bidi-font-size: 12.0pt" lang="EN-US">unbalance torquemso-hansi-font-family: 'Times New Roman'">, mso-hansi-font-family: 'Times New Roman'">, mso-hansi-font-family: 'Times New Roman'">

LI Yanbin, XIANG Dong, GAO Youhua.

Relation and Influence of All Kinds of Unbalance Torques of Three Degrees of Freedom Air-bearing Spacecraft Simulator Caused by Gravity

[J]. Journal of Mechanical Engineering, 2015, 51(21): 7-14.

References

[1] GLEASON. Generated hypoid gears duplex helical method [M]. Rochester：The Gleason Works，1971.

[2] TSAY C B，LIN J Y. A mathematical model for the tooth geometry of hypoid gears [J]. Mathematical and Computer Modelling，1993，18(2)：23-34.

[3] LIN C Y，TSAY C B，FONG Z H. Computer-aided manufacturing of spiral bevel and hypoid gears by applying optimization techniques [J]. Journal of Materials Processing Technology，2001，114：22-35.

[4] IGNACIO G P，FUENTES A，KAHRAMAN A. Computerized design and tooth contact analysis of spiral bevel gears generated by the duplex helical method[C]// Proceedings of the ASME 2011 International Design Engineering Technical Conference & Computers and Information in Engineering Conference，August 28-31，2011，Washington，DC. New York：ASME，2011：1-10.

[5] 王哲，刘庆民，张德君，等. 加工弧齿锥齿轮的精确双重螺旋法（Ⅰ）[J]. 吉林林学院学报，1995，11(2)：75-79. WANG Zhe，LIU Qingmin，ZHANG Dejun，et al. The exact duplex helical method in generation of spiral bevel gears (I)[J]. Journal of Jilin Forestry University，1995，11(2)：75-79.

[6] 曾韬. 弧齿锥齿轮设计与加工[M]. 哈尔滨：哈尔滨工业大学出版社，1989.

ZENG Tao. Design and manufacture of spial bevel and hypoid gears[M]. Harbin：Harbin Institute of Technology Press，1989.

[7] 爱·维尔德哈泊．锥齿轮和准双曲面齿轮啮合原理[M]．北京：机械工业出版社，1958．WILDHABER E. Principle of gearing of bevel and hypoid gears[M]. Beijing：China Machine Press，1958.

[8] BORIS A S. Design and manufacture of hypoid gears [M]. Rochester：The Gleason Works，1978.

[9] FUENTES A，IGNACIO G P，LITVIN F L，et al. Design, manufacture, and evaluation of prototypes of low-noise high-endurance spiral bevel gear drives [C]// Proceeding of IDETC/CIE 2005 ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference，September 24-28，2005，Long Beach，Clifornia. New York：ASME，2005：1-11.

[10] LITVIN F L，FUENTES A，KAHRAMAN A. Design，manufacture，stress analysis，and experimental tests of low-noise high endurance spiral bevel gears [J]. Mechanism and Machine Theory，2006 (41)：83-118.

[11] ARGYRIS J，FUENTES A，LITVIN F L. Computerizedintegrated approach for design and stress analysis of spiral bevel gears [J]. Computer Methods in Applied Mechanics and Engineering, 2002，191：1057-1095.

[12] 吴序堂. 齿轮啮合原理[M]. 2版. 西安：西安交通大学出版社，2009. WU Xutang. Principle of gearing [M]. 2nd ed. Xi’an：Xi’an Jiaotong University Press，2009.

[13] LITVIN F L. Gear geometry and applied theory [M]. Melbourne：Cambridge University Press, 2004.

[14] 董学朱. 齿轮啮合理论基础[M]. 北京：机械工业出版社，1989. DONG Xuezhu. Gear meshing theory foundation[M]. Beijing：China Machine Press，1989.

[15] 北京齿轮厂. 格利森锥齿轮技术资料译文集——第二分册——格利森锥齿轮设计及计算[M]. 北京：机械工业出版社，1983. Beijing Gear Factory. A collection of technical materials of Gleason system bevel gears-the second volume-design and calculation of Gleason system bevel gears [M]. Beijing：China Machine Press，1983.

[16] ANSI/AGMA 2005-D03. Design manual for bevel gears [S]. Alexandri：American Gear Manufacturers Association，2003.

[17] ANSI/AGMA ISO 23509-A08. Bevel and hypoid gear geometry [S]. Alexandria：American Gear Manufacturers

Association，2008.

[18] KOLIVAND M，KAHRAMAN A. A load distribution model for hypoid gears using ease-off topography and shell theory [J]. Mechanism and Machine Theory，2009，44：1848-1865.

[19] SHIH Y P. A novel ease-off flank modification methodology for spiral bevel and hypoid gears [J]. Mechanism and Mechine Theory，2010，45：1108-1124.

[20] KOLIVAND M，KAHRAMAN A. An ease-off based method for loaded tooth contact analysis of hypoid gears having local and global surface deviations [C]// Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference，August 30-September 2，2009，San Diego，California. New York：ASME，2009：1-10.

[21] ARTONI A，KOLIVAND M，KAHRAMAN A. An ease-off based optimization of the loaded transmission error of hypoid gears [J]. ASME Journal of Mechanical Design，2010，132：011010-1-011010-9.