Experimental Research on Force and Temperature Characteristics in Micro-grinding Al6061

doi:10.3901/JME.2014.23.165

Abstract

Abstract: Micro-grinding is an important processing method in micro-manufacturing field. The theory models of force and temperature characteristics in micro-grinding Al6061 are established. A single factor experiment in micro-grinding Al6061 is designed and carried out. From analysis of experiment results, micro-grinding force and micro-grinding temperature effects with different grinding parameters are revealed. According to different depth of micro-grinding, temperature distribution of micro-grinding surface temperature and the temperature of different depth below the surface are deliberated, and thermal burns on finished surface are detected. The force and temperature models proposed by are also accurately confirmed, the highest surface temperature of micro-grinding Al6061 is up to 78.5 ℃. From the experiment results, important reference is provided for further researching surface integrity and improving surface quality of parts.

Key words: grinding force, grinding temperature, micro-grinding

CLC Number:

TG58

WEN Xuelong;GONG Yadong;CHENG Jun;BA Dechun;LI Baopeng. Experimental Research on Force and Temperature Characteristics in Micro-grinding Al6061[J]. , 2014, 50(23): 165-174.

[1]	SU Zhipeng, LIANG Zhiqiang, LI Juan, WANG Fei, WEI Zhengyi, LIU Yuehong, KIM Yoomi, MA Yue, YIN Zhen, WANG Xibin. Experimental Research on Ultrasonic Spiral Assisted Milling and Grinding of Titanium Alloy Micro Groove [J]. Journal of Mechanical Engineering, 2024, 60(9): 5-12.
[2]	YIN Zhen, ZHANG Kun, DAI Chenwei, CHENG Jingcai, XUN Hailong, LI Hua. Research on Wheel Wear and Grinding Performance of Elliptical Ultrasonic Vibration Assisted Grinding SiC Ceramics [J]. Journal of Mechanical Engineering, 2024, 60(9): 57-74.
[3]	DING Wenfeng, ZHAO Junshuai, ZHANG Honggang, ZHAO Biao, SI Wenyuan, SONG Qiang, HUANG Qingfei. Advances in High Efficiency Precision Grinding and Surface Integrity Control Technology for Gears [J]. Journal of Mechanical Engineering, 2024, 60(7): 350-373.
[4]	Lü Lishu, DENG Zhaohui, YUE Wenhui, WAN Linlin, LIU Tao. Modeling Analysis of Grinding Process Driven by Single Grain Grinding Mechanism and Data Fusion [J]. Journal of Mechanical Engineering, 2023, 59(7): 200-215.
[5]	GAO Teng, LI Changhe, ZHANG Yanbin, YANG Min, CAO Huajun, WANG Dazhong, LIU Xin, ZHOU Zongming, LIU Bo. Mechanical Behavior of Material Removal and Predictive Force Model for CFRP Grinding Using Nano Reinforced Biological Lubricant [J]. Journal of Mechanical Engineering, 2023, 59(13): 325-342.
[6]	BIE Wenbo, ZHAO Bo, GAO Guofu, XIANG Daohui, ZHAO Chongyang, TANG Jinyuan. Analytical Modeling and Experimental Investigation on Cutting Coefficient during Tangential Ultrasonic Vibration-assisted Forming Grinding Gear [J]. Journal of Mechanical Engineering, 2022, 58(7): 295-308.
[7]	WANG Long, WANG Liuying, TANG Xiujian, YANG Nengjun, LIU Gu, LI Ruoting, YOU Yinfeng. Construction and Analysis of Grinding Temperature Model for Gear Processed by Form Grinding Technology [J]. Journal of Mechanical Engineering, 2022, 58(3): 295-304.
[8]	ZHANG Zhenyu, WU Jun, SONG Kefeng, GUO Zhaozhi, CHENG Jun. Study on Grinding Force and Machined Surface Quality in Ultra-fine Micro Grinding of Titanium Alloy [J]. Journal of Mechanical Engineering, 2022, 58(15): 75-91.
[9]	QIAN Ning, XU Jiuhua, FU Yucan, JIANG Fan, ZHANG Jingzhou. Investigation on Grinding Temperature and Heat Transfer Performance of Oscillating Grinding Wheel for High-efficient Green Grinding [J]. Journal of Mechanical Engineering, 2022, 58(15): 105-120.
[10]	ZHANG Xuexue, REN Yinghui, YANG Weicheng, LI Wei, YU Kangning. Study on Acoustic Emission Signal Perception of Unsteady Characteristic in Micro-grinding of Monocrystalline Silicon [J]. Journal of Mechanical Engineering, 2022, 58(15): 121-133.
[11]	ZHENG Dihao, QIAN Wei, WU Chongjun, GUO Weicheng. Mechanism and Quality Analysis of Laser Assisted Grinding of Silicon Nitride Ceramics Influenced by Regular Patterns [J]. Journal of Mechanical Engineering, 2022, 58(15): 152-165.
[12]	MAO Jian, ZHAO Man, ZHANG Liqiang. Theoretical Analysis and Experimental Validation of Micro-grinding Force Considering the Effect of Crystallographic Orientation [J]. Journal of Mechanical Engineering, 2021, 57(5): 262-272.
[13]	LI Zheng, DING Wenfeng, ZHOU Huan, SU Honghua. Grinding Temperature of Particulate Reinforced Titanium Matrix Composites in High-speed Grinding Based on Multi-material Model [J]. Journal of Mechanical Engineering, 2019, 55(21): 186-198.
[14]	SHANG Wei, ZHANG Shuyue, GUO Jun, LIU Qiyue, WANG Wenjian. Simulation Study on Material Removal of Rail Grinding Based on Virtual Grinding Wheel Modeling [J]. Journal of Mechanical Engineering, 2018, 54(4): 30-36.
[15]	TIAN Xinli, WANG Long, LIU Qian, TANG Xiujian, YANG Lijun, YANG Xuqi. Construction and Analysis of Grinding Force Model of 20CrMnTi Steel Tooth Surface [J]. Journal of Mechanical Engineering, 2018, 54(3): 227-232.

Experimental Research on Force and Temperature Characteristics in Micro-grinding Al6061

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments