机械工程学报 ›› 2021, Vol. 57 ›› Issue (16): 198-217.doi: 10.3901/JME.2021.16.198
• 特邀专刊:先进设计制造技术前沿:重要装备的可靠性保障 • 上一篇 下一篇
孙莉, 郭素娟, 苑光健, 陈杨熙, 张显程, 涂善东
收稿日期:
2021-04-29
修回日期:
2021-07-19
出版日期:
2021-08-20
发布日期:
2021-11-16
通讯作者:
郭素娟(通信作者),女,1982年出生,博士,副教授,硕士研究生导师。主要研究方向为航空航天/承压设备安全评价与设计技术、材料循环本构模型和在役材料循环性能表征。E-mail:sujuanguo@ecust.edu.cn
作者简介:
孙莉,女,1996年出生,博士研究生。主要研究方向为循环本构模型。E-mail:lis@mail.ecust.edu.cn
基金资助:
SUN Li, GUO Sujuan, YUAN Guangjian, CHEN Yangxi, ZHANG Xiancheng, TU Shantung
Received:
2021-04-29
Revised:
2021-07-19
Online:
2021-08-20
Published:
2021-11-16
摘要: 人类工业文明发展至今,石油化工、核电、航天航空等领域取得了显著的技术进步。在实际服役过程中,诸多复杂关重机械装备往往承受室温或高温循环载荷的作用。因此,对关重装备构件进行结构完整性评估,发展适用而精确的循环本构模型是其中必须且关键的一环。回顾和总结宏观唯象循环本构模型、细观循环本构模型和晶体塑性循环本构模型的发展历史和最新研究进展,针对各类模型的有限元实现方法和结构应用进展进行综述,总结和比较了各种模型在工程应用的优势和不足,并对未来的发展趋势进行展望。
中图分类号:
孙莉, 郭素娟, 苑光健, 陈杨熙, 张显程, 涂善东. 宏/微观循环本构模型及其在工程结构中的应用[J]. 机械工程学报, 2021, 57(16): 198-217.
SUN Li, GUO Sujuan, YUAN Guangjian, CHEN Yangxi, ZHANG Xiancheng, TU Shantung. Macro/micro Cyclic Constitutive Models and Their Application in Engineering Structures[J]. Journal of Mechanical Engineering, 2021, 57(16): 198-217.
[1] 涂善东. 高温结构完整性原理[M]. 北京:科学出版社, 2003. TU Shantung. Principle of high temperature structural integrity[M]. Beijing:Science Press,2003. [2] DOWLING N E. Mechanical behavior of materials:Engineering methods for deformation,fracture,and fatigue[M]. New Jersey:Pearson Education,Inc,2013. [3] WANG R,GUO S,CHEN H,et al. Multi-axial creep-fatigue life prediction considering history-dependent damage evolution:A new numerical procedure and experimental validation[J]. Journal of the Mechanics and Physics of Solids,2019,131:313-336. [4] 康国政,高庆,蔡力勋,等. SS304不锈钢循环变形行为温度效应的实验研究[J]. 材料工程,2003(10):34-36. KANG Guozheng,GAO Qing,CAI Lixun,et al. Experimental study on the temperature-dependent cyclic deformation of SS 304 stainless steel[J]. Materials Engineering,2003(10):34-36. [5] SHI D Q,LIU J L,YANG X G,et al. Experimental investigation on low cycle fatigue and creep-fatigue interaction of DZ125 in different dwell time at elevated temperatures[J]. Materials Science and Engineering A,2010(528):233-238. [6] SUN L,BAO X G,GUO S J,et al. The creep-fatigue behavior of a nickel-based superalloy:Experiments study and cyclic plastic analysis[J]. International Journal of Fatigue,2021(147):106187. [7] KANG G Z. Uniaxial time-dependent ratchetting of SiCP/6061Al composites at room and high temperature[J]. Composites Science and Technology,2006(66):1418-1430. [8] YAGUCHI M,TAKAHASHI Y. Ratchetting of viscoplastic material with cyclic softening,part 1:experiments on modified 9Cr-1Mo steel[J]. International Journal of Plasticity,2005(21):43-65. [9] ZHANG S L,XUAN F Z,GUO S J,et al. The role of anelastic recovery in the creep-fatigue interaction of 9-12% Cr steel at high temperature[J]. International Journal of Mechanical Science,2017(122):95-103. [10] QIU B,KANG Q,KANG G,et al. Rate-dependent transformation ratcheting-fatigue interaction of super-elastic NiTi alloy under uniaxial and torsional loadings:Experimental observation[J]. International Journal of Fatigue,2019,127:470-480. [11] 杨刚,李建,方涛. U75VG钢轨钢与温度相关的循环塑性变形行为[J]. 机械工程材料,2019,43(5):71-74. YANG Gang,LI Jian,FANG Tao. Cyclic plastic deformation behavior of U75VG rail steel with temperature dependence[J]. Mechanical Engineering Materials,2019,43(5):71-74. [12] FREDERICK C O,ARMSTRONG P. A mathematical representation of the multiaxial Bauschinger effect[J]. Materials at High Temperatures,2007,24(1):1-26. [13] CHABOCHE J L. Viscoplastic constitutive equations for the description of cyclic and anisotropic behaviour of metals[J]. Bull. Acad. Polon. Sci. Ser. Sci. Tech.,1977,25:33-41. [14] CHABOCHE J L. On some modifications of kinematic hardening to improve the description of ratchetting effects[J]. International Journal of Plasticity,1991,7(7):661-678. [15] OHNO N,WANG J D. Kinematic hardening rules with critical state of dynamic recovery,part I:Formulation and basic features for ratchetting behavior[J]. International Journal of Plasticity,1993,9(3):375-390. [16] OHNO N,WANG J D. Kinematic hardening rules with critical state of dynamic recovery,Part II:Application to experiments of ratchetting behavior[J]. International Journal of Plasticity,1993,9(3):391-403. [17] ABDEL-KARIM M,OHNO N. Kinematic hardening model suitable for ratchetting with steady-state[J]. International Journal of Plasticity,2000,16(3-4):225-240. [18] KANG G Z. A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation[J]. Mechanics of Materials,2004,36(4):299-312. [19] WU D L,XUAN F Z,GUO S,et al. Uniaxial mean stress relaxation of 9-12% Cr steel at high temperature:Experiments and viscoplastic constitutive modeling[J]. International Journal of Plasticity,2016,77:156-173. [20] KANG G Z. A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation[J]. Mechanics of Materials,2004,36(5):299-312. [21] GUO S J,KANG G Z,ZHANG J. Meso-mechanical constitutive model for ratchetting of particle-reinforced metal matrix composites[J]. International Journal of Plasticity,2011,27(12):1896-1915. [22] Kang G Z,Ohno N,Nebu A. Constitutive modeling of strain-range dependent cyclic hardening[J]. International Journal of Plasticity,2003,19:1801-1819. [23] Kang G Z,Kan Q H,Zhang J. Constitutive modeling for uniaxial time-dependent ratcheting of SS304 stainless steel[J]. Mechanics of Materials,2007,39:488-499. [24] ZHAN Z L,TONG J. A study of cyclic plasticity and viscoplasticity in a new nickel-based superalloy using unified constitutive equations. Part I:Evaluation and determination of material parameters[J]. Mechanics of Materials,2007,39(1):64-72. [25] Kan Q H,Kang G Z,Zhang J. Uniaxial time-dependent ratchetting:Visco-plastic modeland finite element application[J]. Theoretical and Applied Fracture Mechanics,2007,47:133-144. [26] ZHANG S L,XUAN F Z. Interaction of cyclic softening and stress relaxation of 9-12% Cr steel under strain-controlled fatigue-creep condition:Experimental and modeling[J]. International Journal of Plasticity,2017,98:45-64. [27] ZARKA J,CASIER J. Elastic-plastic response of a structure to cyclic loading:Practical rules[M]. Oxford:Pergamon Press,1979. [28] TALEB L,CAILLETAUD G,BLAJ L. Numerical simulation of complex ratcheting tests with a multi-mechanism model type[J]. International Journal of Plasticity,2006,22(4):724-753. [29] HASSAN T,TALEB L,KRISHNA S. Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models[J]. International Journal of Plasticity,2008,24(10):1863-1889. [30] TALEB L,CAILLETAUD G. An updated version of the multimechanism model for cyclic plasticity[J]. International Journal of Plasticity,2010,26(6):859-874. [31] CAILLETAUD G,SAI K. Study of plastic/viscoplastic models with various inelastic mechanisms[J]. International Journal of Plasticity,1995,11(8):991-1005. [32] SAI K,AUBOURG V,CAILLETAUD G,et al. Physical basis for model with various inelastic mechanisms for nickel base superalloy[J]. Materials Science and Technology,2004,20(6):747-755. [33] SAI K,CAILLETAUD G. Multi-mechanism models for the description of ratchetting:Effect of the scale transition rule and of the coupling between hardening variables[J]. International Journal of Plasticity,2007,23(9):1589-1617. [34] TURKI M,NACEUR I B,MAKNI M,et al. Mechanical and damage behaviour of mortar-rubber aggregates mixtures:Experiments and simulations[J]. Materials and Structures,2009,42(10):1313-1324. [35] SAI K. Modèles à grand nombre de variables internes et méthodes numériques associées[D]. Paris:École Nationale Supérieure des Mines de Paris,1993. SAI K. Models with a large number of internal variables and associated numerical methods[D]. Paris:National School of Mines of Paris,1993. [36] VELAY V,BERNHART G,PENAZZI L. Cyclic behavior modeling of a tempered martensitic hot work tool steel[J]. International Journal of Plasticity,2006,22(3):459-496. [37] TAYLOR G I. Plastic strain in metals[J]. J. Inst. Metals,1938,62:307-324. [38] BUSSO E,MEISSONNIER F,ODOWD N. Gradient-dependent deformation of two-phase single crystals[J]. Journal of the Mechanics and Physics of Solids,2000,48(11):2333-2361. [39] Hill R,Rice J R. Constitutive analysis of elastic-plastic crystals at arbitrary strain[J]. Journal of the Mechanics and Physics of Solids,1972,20(6):401-413. [40] ASARO R J,RICE J. Strain localization in ductile single crystals[J]. Journal of the Mechanics and Physics of Solids,1977,25(5):309-338. [41] PEIRCE D,ASARO R,NEEDLEMAN A. An analysis of nonuniform and localized deformation in ductile single crystals[J]. Acta Metallurgica,1982,30(6):1087-1119. [42] ASARO R J. Crystal plasticity[J]. Journal of Applied Mechanics,1983:921-934. [43] ROTERS F,EISENLOHR P,HANTCHERLI L,et al. Overview of constitutive laws,kinematics,homogenization and multiscale methods in crystal plasticity finite-element modeling:Theory,experiments,applications[J]. Acta Materialia,2010,58(4):1152-1211. [44] SACHS G. Zur ableitung einer fliessbedingung[M]//Mitteilungen der deutschen Materialprüfungsanstalten. Springer,Berlin,Heidelberg,1929:94-97. SACHS G. To derive a flow conditon[M]//Notifications from the German Material Testing Institutes. Springer,Berlin,Heidelberg,1929:94-97. [45] HILL R. A self-consistent mechanics of composite materials[J]. Journal of the Mechanics and Physics of Solids,1965,13(4):213-222. [46] BERVEILLER M,ZAOUI A. An extension of the self-consistent scheme to plastically-flowing polycrystals[J]. Journal of the Mechanics and Physics of Solids,1978,26(5-6):325-344. [47] CAILLETAUD G,PILVIN P. Utilisation de modèles polycristallins pour le calcul par éléments finis[J]. Revue européenne des éléments finis,1994,3(4):515-541. CAILLETAUD G,PILVIN P. Using polycrystalline models for finite element computation[J]. European Finite Element Review,1994,3(4):515-541. [48] CAILLETAUD G,SAI K. A polycrystalline model for the description of ratchetting:Effect of intergranular and intragranular hardening[J]. Materials Science and Engineering:A,2008,480(1-2):24-39. [49] KANG G,BRUHNS O T. New cyclic crystal viscoplasticity model based on combined nonlinear kinematic hardening for single crystals[J]. Materials Research Innovations,2011,15(Suppl.):s11-s14. [50] BASSANI J L,WU T Y. Latent hardening in single crystals. II. Analytical characterization and predictions[J]. Proceedings of the Royal Society of London Series A:Mathematical and Physical Sciences,1991,435(1893):21-41. [51] KANG G Z,BRUHNS O T,SAI K. Cyclic polycrystalline visco-plastic model for ratchetting of 316L stainless steel[J]. Computational Materials Science,2011,50(4):1399-1405. [52] WANG R,ZHANG B,HU D,et al. Cyclic viscoplastic deformation modeling of a nickel-based single crystal superalloy with [001] orientation[C]//MATEC Web of Conferences. EDP Sciences,2018,165:19005. [53] LI K S,WANG R Z,YUAN G J,et al. A crystal plasticity-based approach for creep-fatigue life prediction and damage evaluation in a nickel-based superalloy[J]. International Journal of Fatigue,2021,143:106031. [54] WANG C,XUAN F Z,ZHAO P,et al. Effect of cyclic loadings on stress relaxation behaviors of 9-12%Cr steel at high temperature[J]. Mechanics of Materials,2021,156:103787. [55] LI H,KANG G Z,YU C. Modeling uniaxial ratchetting of magnesium alloys by a new crystal plasticity considering dislocation slipping,twinning and detwinning mechanisms[J]. International Journal of Mechanical Sciences,2020,179:105660. [56] QIU Y,WENG G. A theory of plasticity for porous materials and particle-reinforced composites[J]. Journal of Applied Mechanics,1992,59(2):261-268. [57] DOGHRI I,ADAM L,BILGER N. Mean-field homogenization of elasto-viscoplastic composites based on a general incrementally affine linearization method[J]. International Journal of Plasticity,2010,26(2):219-238. [58] ESHELBY J D. The determination of the elastic field of an ellipsoidal inclusion,and related problems[J]. Proceedings of the Royal Society of London Series A,Mathematical and Physical Sciences (1934-1990),1957,241(1226):376-396. [59] NEMAT-NASSER S,LORI M,DATTA S K. Micromechanics:Overall properties of heterogeneous materials[J]. Advanced Cement Based Materials,1995,2(2):561. [60] MORI T,TANAKA K. Average stress in matrix and average elastic energy of materials with misfitting inclusions[J]. Acta Metallurgica,1973,21(5):571-574. [61] DOGHRI I. Micro-mechanics of materials[M]//Mechanics of Deformable Solids. Springer,Berlin, Heidelberg,2000:519-544. [62] BENVENISTE Y. A new approach to the application of Mori-Tanaka's theory in composite materials[J]. Mechanics of Materials,1987,6(2):147-157. [63] OUAAR A,DOGHRI I. Homogenization of two-phase elasto-plastic composite materials and structures-study of tangent operators,cyclic plasticity and numerical algorithms[J]. International Journal of Solids & Structures,2003,40(7):1681-1712. [64] HILL R. A self-consistent mechanics of composite materials[J]. Journal of the Mechanics and Physics of Solids,1965,13(4):213-222. [65] MOLINARI A,CANOVA G,AHZI S. A self consistent approach of the large deformation polycrystal viscoplasticity[J]. Acta Metallurgica,1987,35(12):2983-2994. [66] MASSON R,ZAOUI A. Self-consistent estimates for the rate-dependent elastoplastic behaviour of polycrystalline materials[J]. Journal of the Mechanics and Physics of Solids,1999,47(7):1543-1568. [67] PIERARD O,DOGHRI I. An enhanced affine formulation and the corresponding numerical algorithms for the mean-field homogenization of elasto-viscoplastic composites[J]. International Journal of Plasticity,2006,22(1):131-157. [68] MERCIER S,MOLINARI A. Homogenization of elastic-viscoplastic heterogeneous materials:Self-consistent and Mori-Tanaka schemes[J]. International Journal of Plasticity,2009,25(6):1024-1048. [69] GUO S J,KANG G Z,ZHANG J. A cyclic visco-plastic constitutive model for time-dependent ratchetting of particle-reinforced metal matrix composites[J]. International Journal of Plasticity,2013,40:101-125. [70] KANG G Z,GAO Q,YANG X J. Uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room temperature:experiments and simulations[J]. International Journal of Non-Linear Mechanics,2004,39(5):843-857. [71] KAN Q H,KANG G Z,QIAN L. Super-elastic constitutive model considering plasticity and its finite element implementation[J]. Acta Mechanica Solida Sinica,2010,23(2):95-105. [72] 姚萍,王润梓,郭素娟,等. GH4169合金蠕变疲劳行为的有限元模拟及寿命预测[J]. 航空学报,2018,39(12):377-386. YAO Ping,WANG Runzi,GUO Sujuan,et al. Finite element simulation and life prediction of creep fatigue behavior of GH4169 alloy[J]. Journal of Aeronautics,2018,39(12):377-386. [73] YUAN G J,ZHANG X C,CHEN B,et al. Low-cycle fatigue life prediction of a polycrystalline nickel-base superalloy using crystal plasticity modelling approach[J]. Journal of Materials Science & Technology,2020,3828-3838. [74] ZHU Y L,KANG G Z,DING J,et al. Study on bending fretting fatigue of LZ50 axle steel considering ratchetting by finite element method[J]. Fatigue & Fracture of Engineering Materials & Structures,2013,36(2):127-138. [75] DAFALIAS Y,POPOV E. A model of nonlinearly hardening materials for complex loading[J]. Acta Mechanica,1975,21(3):173-192. [76] BESSELING J R. A theory of elastic,plastic and creep deformations of an initially isotropic material showing anisotropic strain-hardening,creep recovery,and secondary creep[R]. Calif:Stanford Univ.,1959:529-536. [77] MROZ Z. On the description of anisotropic workhardening[J]. Journal of the Mechanics and Physics of Solids,1967,15(3):163-175. [78] ZIEGLER M. An attempt to describe the behavior of material under cyclic loading using a more general work hardening model[J]. Acta Mechanics,1959,7:199-212. [79] PRAGER W. A new method of analyzing stress and strain in work-hardening plastic solid[J]. Quarterly of Applied Mechanics,1959,7:493-496. [80] TSENG N T,LEE G C. Simple plasticity model of two-surface type[J]. Journal of Engineering Mechanics,1983,109(3):795-810. [81] XIA Z,ELLYIN F. A constitutive model with capability to simulate complex multiaxial ratcheting behaviour of materials[J]. International Journal of Plasticity,1997,13(1-2):127-142. [82] 康国政. 循环稳定材料的棘轮行为:II. 隐式应力积分算法和有限元实现[J]. 工程力学,2005,22(3):204-9. KANG Guozheng. Ratcheting behavior of cyclically stable materials:II. Implicit stress integration algorithm and finite element[J]. Engineering Mechanics,2005,22(3):204-209. [83] 张娟. 循环硬化材料高温非比例循环棘轮行为的本构描述及其有限元实现[D]. 成都:西南交通大学,2006. ZHANG Juan. Constitutive description of non-proportional cyclic ratcheting behavior of cyclic hardening materials at high temperature and its finite element realization[D]. Chengdu:Southwest Jiaotong University,2006. [84] WILKINS M L. Calculation of elastic-plastic flow[J]. Journal of Biological Chemistry,1964,280(13):12833-12839. [85] KREIG R,KEY S. Implementation of a time dependent plasticity theory into structural programs[J]. Constitutive Equations in Viscoplasticity:Computational and Engineering Aspects,1976,20:125-137. [86] SIMO J,HUGHES T. General return mapping algorithms for rate-independent plasticity[J]. Constitutive Laws for Engineering Materials:Theory and Applications,1987,1221-1232. [87] SIMO J,GOVINDJEE S. Non-linear stability and symmetry preserving return mapping algorithms for plasticity and viscoplasticity[J]. International Journal for Numerical Methods in Engineering,1991,31(1):151-176. [88] CHABOCHE J L. EVPCYCL:Un code d'éléments finis en viscoplasticitécyclique[J]. La RechercheAérospatiale, 1986(2):91-112.CHABOCHE J L. EVPCYCL:A finite element program in cyclic viscoplasticity[J]. Recherche Aerospatiale,1986(2):91-112. [89] KOBAYASHI M,OHNO N. Implementation of cyclic plasticity models based on a general form of kinematic hardening[J]. International Journal for Numerical Methods in Engineering,2002,53(9):2217-2238. [90] KANG G Z. Finite element implementation of visco-plastic constitutive model with strain-range-dependent cyclic hardening[J]. Communications in Numerical Methods in Engineering,2006,22(2):137-153. [91] TIAN J,LI J,XIE H,et al. Finite element implementation of a temperature-dependent cyclic plastic model for SA508-3 steel[J]. Metals,2018,8(11):955. [92] SALEEB A,PADULA II S,KUMAR A. A multi-axial,multimechanism based constitutive model for the comprehensive representation of the evolutionary response of SMAs under general thermomechanical loading conditions[J]. International Journal of Plasticity,2011,27(5):655-687. [93] CHABOCHE J,CAILLETAUD G. Integration methods for complex plastic constitutive equations[J]. Computer Methods in Applied Mechanics and Engineering,1996,133(1-2):125-155. [94] YUAN G J,WANG R Z,GONG C Y,et al. Investigations of micro-notch effect on small fatigue crack initiation behaviour in nickel-based alloy GH4169:Experiments and simulations[J]. International Journal of Fatigue,2020,136:105578. [95] CHABOCHE J L,KANOUTE P,AZZOUZ F. Cyclic inelastic constitutive equations and their impact on the fatigue life predictions[J]. International Journal of Plasticity,2012,35:44-66. [96] GUO Z,HUANG D,YAN X,et al. A damage coupled elastic-plastic constitutive model and its application on low cycle fatigue life prediction of turbine blade[J]. International Journal of Fatigue,2020,131:105298. [97] 唐晶. 基于混合硬化本构模型的汽轮机转子轮盘疲劳寿命预测方法研究[D]. 杭州:浙江大学,2020. TANG Jing. Research on fatigue life prediction method of steam turbine rotor disk based on hybrid hardening constitutive model[D]. Hangzhou:Zhejiang University,2020. [98] NABOULSI S. Incorporating micro-thermo-mechanical damage model in life prediction analysis of a turbine engine blade to disk attachment[C]//ASME International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers,2013,56383:V009T10A018. [99] 蔡强,张翼,李闯. 面-面接触铝合金紧固件微动疲劳寿命预测方法研究[J]. 科学技术与工程,2016,16(16):183-187. CAI Qiang,ZHANG Yi,LI Chuang. Study on fretting fatigue life prediction method for surface to surface contact aluminum alloy fasteners[J]. Science Technology and Engineering,2016,16(16):183-187. [100] SHEN F,HU W,MENG Q. A damage mechanics approach to fretting fatigue life prediction with consideration of elastic-plastic damage model and wear[J]. Tribology International,2015,82:176-190. [101] DING J,KANG G,ZHU Y,et al. Finite element analysis on bending fretting fatigue of 316L stainless steel considering ratchetting and cyclic hardening[J]. International Journal of Mechanical Sciences,2014,86:26-33. [102] JING J P,MENG G,SUN Y,et al. An effective continuum damage mechanics model for creep-fatigue life assessment of a steam turbine rotor[J]. International Journal of Pressure Vessels and Piping,2003,80(6):389-396. [103] WANG W,BUHL P,KLENK A,et al. Study of creep-fatigue behavior in a 1000 MW rotor using a unified viscoplastic constitutive model with damage[J]. International Journal of Damage Mechanics,2016,25(2):178-202. [104] FENG L,XUAN F Z. Release and redistribution of residual stress in the welded turbine rotor under service-type loadings[J]. Nuclear Engineering and Design,2015,295:500-510. [105] BONETTI R,HADJIPAKKOS P,RAE Y,et al. A lifing method based on R5 and viscoplasticity modelling and its application to turbine rotor under thermomechanical loading[J]. Engineering Failure Analysis,2020,110:104416. [106] 陈克明,田若洲,郭素娟,等. 循环热机载荷作用下航空涡轮盘蠕变疲劳寿命预测[J/OL]. 航空学报,1-12[2021-06-17]. http://kns.cnki.net/kcms/detail/11.1929.V.20210409.1802.014.html. CHEN Keming,TIAN Ruozhou,GUO Sujuan,et al. Prediction of creep fatigue life of aviation turbine disk under cyclic thermal load[J/OL]. Journal of Aeronautics,1-12[2021-06-17]. http://kns.cnki.net/kcms/detail/11.1929.V.20210409.1802.014.html. [107] ZHAN Z,HU W,LI B,et al. Continuum damage mechanics combined with the extended finite element method for the total life prediction of a metallic component[J]. International Journal of Mechanical Sciences,2017,124:48-58. [108] MANONUKUL A,DUNNE F. High-and low-cycle fatigue crack initiation using polycrystal plasticity[J]. Proceedings of the Royal Society of London Series A:Mathematical,Physical and Engineering Sciences,2004,460(2047):1881-1903. [109] CHEN Y,HOU Z,KANG R. Lifetime prediction and impact factors analysis of ball grid array solder joint based on FEA[C]//2010 11th International Conference on Electronic Packaging Technology and High Density Packing. IEEE,2010:1142-1146. [110] SWEENEY C,O'BRIEN B,DUNNE F,et al. Strain-gradient modelling of grain size effects on fatigue of CoCr alloy[J]. Acta Materialia,2014,78:341-353. [111] YUAN G,CHEN H,LI D,et al. The effect of δ phase on the microplasticity evolution of a heat-treated nickel base superalloy[J]. Mechanics of Materials,2020,148:103520. [112] SWEENEY C A,VORSTER W,LEEN S B,et al. The role of elastic anisotropy,length scale and crystallographic slip in fatigue crack nucleation[J]. Journal of the Mechanics and Physics of Solids,2013,61(5):1224-1240. [113] LI L,SHEN L,PROUST G. Fatigue crack initiation life prediction for aluminium alloy 7075 using crystal plasticity finite element simulations[J]. Mechanics of Materials,2015,81:84-93. [114] ZHAO N,WANG W,LIU Y. Intergranular mechanical behavior in a blade groove-like component by crystal plasticity model with cohesive zone model[J]. Engineering Fracture Mechanics,2018,201:196-213. [115] MEADE E D,SUN F,TIERNAN P,et al. Experimental study and multiscale modelling of the high temperature deformation of tempered martensite under multiaxial loading[J]. Materials Science and Engineering:A,2018,737:383-392. [116] POLIZZOTTO C. A unified treatment of shakedown theory and related bounding techniques[J]. SM Archives,1982,7:19-75. [117] ABDEL-KARIM M. Shakedown of complex structures according to various hardening rules[J]. International Journal of Pressure Vessels and Piping,2005,82(6):427-458. [118] Hassan T, Rahman M. Constitutive models in simulating low-cycle fatigue and ratcheting responses of elbow[J]. Journal of Pressure Vessel Technology,2015,137:031002-1. [119] 付仁,阚前华,康国政. 循环热机械载荷下薄壁圆筒的热棘轮边界分析[J]. 西南交通大学学报,2013,48(增刊):11-14. FU Ren,KAN Qianhua,KANG Guozheng. Analysis of thermal ratchet boundary of thin-walled cylinder under cyclic thermomechanical load[J]. Journal of Southwest Jiaotong University,2013,48(Suppl.):11-14. [120] GAO B,CHEN X,CHEN G. Ratchetting and ratchetting boundary study of pressurized straight low carbon steel pipe under reversed bending[J]. International Journal of Pressure Vessels and Piping,2006,83(2):96-106. [121] CHEN X H,CHEN X. Ratcheting study of pressurized straight Z2CND18.12N austenitic stainless steel pipe under reversed bending[C]//Advanced Materials Research. Trans Tech Publicatons Ltd,2013,798:235-238. [122] CHEN X H,WANG X,CHEN X. Effects of temperature on the ratcheting behavior of pressurized 90° elbow pipe under force controlled cyclic loading[J]. Smart Structures and Systems,2017,19(5):473-485. |
[1] | 程军, 徐帅, 汪步云, 许德章, 杨继全, 裘进浩. 一种自调零平切型电涡流探头及其在碳纤维复合材料细观成像中的应用[J]. 机械工程学报, 2021, 57(4): 27-35. |
[2] | 安剑, 李永丰, 张云光, 李淑慧. 热冲压条件下2219铝合金的本构行为测试与建模[J]. 机械工程学报, 2021, 57(4): 44-52. |
[3] | 李银银, 蒋玮. 基于纳米压痕的激光修复层晶体材料常数反演方法[J]. 机械工程学报, 2021, 57(2): 97-104. |
[4] | 孙李刚, 凌超, 陈浩, 李东风. 结构完整性分析中的多尺度力学方法[J]. 机械工程学报, 2021, 57(16): 106-121. |
[5] | 高希光, 韩栋, 宋迎东, 张盛, 于国强. 陶瓷基复合材料结构的动力学强度设计方法:研究现状及展望[J]. 机械工程学报, 2021, 57(16): 235-247. |
[6] | 郝小乐, 岳彩旭, 陈志涛, 刘献礼, LIANG S Y, WANG Lihui, 严复钢. 基于解析方法的TANH材料本构模型研究[J]. 机械工程学报, 2020, 56(9): 252-264. |
[7] | 高冀峰, 房光强, 余兵, 樊鹏玄, 陈务军, 赵兵, 曹争利. 织物增强形状记忆复合材料大型空间可展桁架研究进展[J]. 机械工程学报, 2020, 56(5): 80-92. |
[8] | 陈翔, 陈伟, 禄盛, 金晓清, 马文生, 赵洋. NiTiNb记忆合金热力学性能的试验及其唯象本构模型[J]. 机械工程学报, 2020, 56(4): 65-75. |
[9] | 荣海, 盈亮, 胡平, 侯文彬. 基于连续介质损伤力学的7075铝合金高温成形极限理论预测与数值仿真[J]. 机械工程学报, 2020, 56(24): 51-60. |
[10] | 邓云飞, 张永, 吴华鹏, 曾宪智. 6061-T651铝合金动态力学性能及J-C本构模型的修正[J]. 机械工程学报, 2020, 56(20): 74-81. |
[11] | 李建明, 王相宇, 乔阳, 付秀丽, 郭培全. 液氮冷却低温切削镍基合金Inconel 718的试验与仿真[J]. 机械工程学报, 2020, 56(18): 61-72. |
[12] | 陈冰, 刘卫, 罗明, 张晓腾. 基于直角切削的高温合金John-Cook本构参数逆向识别[J]. 机械工程学报, 2019, 55(7): 217-224. |
[13] | 毕静, 崔学习, 张艳苓, 张志, 吴向东. Ti-6Al-4V钛合金薄板应力松弛行为研究[J]. 机械工程学报, 2019, 55(18): 43-52,62. |
[14] | 孟莹, 付秀丽, 潘永智, 徐念伟. 考虑成形方向的航空铝合金修正本构模型的构建[J]. 机械工程学报, 2018, 54(22): 78-85. |
[15] | 荆洪阳, 孟珊, 赵雷, 韩永典, 徐连勇. Sanicro25奥氏体耐热钢高温蠕变寿命的预测[J]. 机械工程学报, 2018, 54(12): 165-172. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||