基于布谷鸟搜索算法和最大二阶循环平稳盲解卷积的滚动轴承故障诊断方法

doi:10.3901/JME.2021.09.099

机械工程学报 ›› 2021, Vol. 57 ›› Issue (9): 99-107.doi: 10.3901/JME.2021.09.099

扫码分享

基于布谷鸟搜索算法和最大二阶循环平稳盲解卷积的滚动轴承故障诊断方法

黄包裕, 张永祥, 赵磊

海军工程大学动力工程学院武汉 430033

收稿日期:2020-05-14 修回日期:2020-12-31 出版日期:2021-05-05 发布日期:2021-06-15
通讯作者: 张永祥(通信作者)，男，1963年出生，博士，教授，博士研究生导师。主要研究方向为状态检测、故障诊断与维修。E-mail：13397195219@163.com
作者简介:黄包裕，男，1996年出生，博士研究生。主要研究方向为舰船动力装置状态检测、故障诊断与维修。E-mail：2632643625@qq.com

Research on Fault Diagnosis Method of Rolling Bearings Based on Cuckoo Search Algorithm and Maximum Second Order Cyclostationary Blind Deconvolution

HUANG Baoyu, ZAHNG Yongxiang, ZHAO Lei

College of Power Engineering, Naval University of Engineering, Wuhan 430033

Received:2020-05-14 Revised:2020-12-31 Online:2021-05-05 Published:2021-06-15

摘要/Abstract

摘要： 针对最大二阶循环平稳盲解卷积（Maximum second order cyclostationary blind deconvolution，CYCBD）的轴承故障诊断效果取决于选取的故障特征频率的精度以及滤波器的长度的问题，提出了用布谷鸟搜索算法（Cuckoo search algorithm，CSA）优化CYCBD，并以改进的最大谐波显著性指标（Improved maximum harmonic significance index，IHSI）为优化依据的诊断方法。该方法首先要预估故障特征频率以及滤波器长度的搜索范围，然后利用CSA比较不同故障特征频率以及滤波器长度下解卷积信号的IHSI值，并选取最大IHSI值对应的故障特征频率和滤波器长度作为CYCBD的输入参数，最后对解卷积后的信号进行平方包络来提取故障特征。仿真和实验结果表明，CSA能够高效地寻找出精确的故障特征频率以及合适的滤波器长度，从而确保CYCBD的解卷积效果，而CYCBD与最小熵解卷积（Minimum entropy deconvolution，MED）、最大相关峭度解卷积（Maximum correlation kurtosis deconvolution，MCKD）的比较显示，CYCBD拥有更强的故障特征提取能力。

关键词: 滚动轴承, 故障诊断, 布谷鸟搜索算法, 最大二阶循环平稳盲解卷积

Abstract: Aiming at the problem that the effectiveness of bearing fault diagnosis for maximum second order cyclostationary blind deconvolution (CYCBD) depends on the accuracy of the selected fault feature frequency and the length of the filter, we propose a diagnosis method that uses cuckoo search algorithm (CSA) to optimize CYCBD and uses the improved maximum harmonic significance index (IHSI) as the optimization basis. Firstly, The search range of fault feature frequency and filter length is estimated. then, CSA was used to compare the IHSI values of the deconconvolution signals at different fault feature frequencies and filter lengths, and the fault feature frequencies and filter lengths corresponding to the maximum IHSI values were selected as the input parameters of CYCBD. Finally, The square envelope of the deconvolve signal is used to extract fault features. Simulation and experiment show that CSA can efficiently find the accurate fault characteristic frequency and the appropriate filter length to ensure the deconvolution effect of CYCBD, and the comparisons of CYCBD with minimum entropy deconvolution (MED) and maximum correlation kurtosis deconvolution (MCKD) show that CYCBD has stronger fault feature extraction capability.

Key words: rolling element bearing, fault diagnosis, cuckoo search algorithm, maximum second order cyclostationary blind deconvolution

中图分类号:

TG156

黄包裕, 张永祥, 赵磊. 基于布谷鸟搜索算法和最大二阶循环平稳盲解卷积的滚动轴承故障诊断方法[J]. 机械工程学报, 2021, 57(9): 99-107.

HUANG Baoyu, ZAHNG Yongxiang, ZHAO Lei. Research on Fault Diagnosis Method of Rolling Bearings Based on Cuckoo Search Algorithm and Maximum Second Order Cyclostationary Blind Deconvolution[J]. Journal of Mechanical Engineering, 2021, 57(9): 99-107.

参考文献

[1] ANTONI J. Fast computation of the kurtogram for the detection of transient faults[J]. Mechanical Systems and Signal Processing，2005，21(1)：108-124.
[2] BARSZCZ T，JABłONSKI A. A novel method for the optimal band selection for vibration signal demodulation and comparison with the Kurtogram[J]. Mechanical Systems and Signal Processing，2011，25(1)：431-451.
[3] ANTONI J. The infogram：Entropic evidence of the signature of repetitive transients[J]. Mechanical Systems and Signal Processing，2016，74：73-94.
[4] MOSHREFZADEH A，FASANA A. The Autogram：An effective approach for selecting the optimal demodulation band in rolling element bearings diagnosis[J]. Mechanical Systems and Signal Processing，2018，105：294-318.
[5] NI Qing，WANG Kesheng，ZHENG Jinde. Rolling element bearings fault diagnosis based on a novel optimal frequency band selection scheme[J]. IEEE Access，2019，7：80748-80766.
[6] SMITH W A，BORGHESANI P，NI Qing，et al. Optimal demodulation-band selection for envelope-based diagnostics：A comparative study of traditional and novel tools[J]. Mechanical Systems and Signal Processing， 2019，134：106303.
[7] WANG Jun，DU Guifu，ZHU Zhongkui. Fault diagnosis of rotating machines based on the EMD manifold[J]. Mechanical Systems and Signal Processing，2020，135：106443.
[8] 王普，李天垚，高学金，等. 分层自适应小波阈值轴承故障信号降噪方法[J]. 振动工程学报，2019，32（3）：548-555.WANG Pu，LI Tianyao，GAO Xuejin. Bearing fault singal denoising method of hierarchical adaptive wavelet threshold function[J]. Journal of Vibration Engineering，2019，32(3)：548-555.
[9] YAN Xiaoan，JIA Minping. Application of CSA-VMD and optimal scale morphological slice bispectrum in enhancing outer race fault detection of rolling element bearings[J]. Mechanical Systems and Signal Processing， 2019，122： 56-86.
[10] HUANG Yan，LIN Jianghui，LIU Zechao，et al. A modifified scale-space guiding variational mode decomposition for high-speed railway bearing fault diagnosis[J]. Journal of Sound and Vibration，2019，444：216-234.
[11] 祝小彦，王永杰. 基于MOMEDA与Teager能量算子的滚动轴承故障诊断[J]. 振动与冲击，2018，37（6）：104-110.ZHU Xiaoyan，WANG Yongjie. Fault diagnosis of rolling bearings based on the MOMEDA and Teager energy operator[J]. Vibration and Shock，2018，37（6）：104-110.
[12] CHENG Yao，CHEN Bingyan，MEI Guiming，et al. A novel blind deconvolution method and its application to fault identifification[J]. Journal of Sound and Vibration， 2019，460.
[13] BUZZONI M，ANTONI J，D'ELIA G. Blind deconvolution based on cyclostationarity maximization and its application to fault identification[J]. Journal of Sound and Vibration，2018，432：569-601.
[14] 刘文明，廖英英，杨绍普，等.一种基于多点峭度谱和最大相关峭度解卷积的滚动轴承故障诊断方法[J]. 振动与冲击，2019，38(2)：146-151.LIU Wenming，LIAO Yingying，YANG Shaopu，et al. Fault diagnosis of rolling bearings based on multipoint kurtosis spectrums and the maximum correlated kurtosis deconvolution method[J]. Vibration and Shock，2019，38(2)：146-151.
[15] CHENG Yao，WANG Zhiwei，ZHANG Weihua，et al. Particle swarm optimization algorithm to solve the deconvolution problems for rolling element bearing fault diagnosis[J]. ISA Transactions，2019，90.
[16] 孙伟，李新民，金小强，等. 基于MCKD和增强倒频谱的直升机自动倾斜器滚动轴承故障诊断方法[J]. 振动与冲击，2019，38（2）：159-163.SUN Wei，LI Xinmin，JIN Xiaoqiang，et al. Fault diagnosis method for helicopter swash-plate rolling bearings based on the MCKD and envelope cepstrum[J].Vibration and Shock，2019，38（2）：159-163.
[17] YANG Xinshe，SUASH D. Cuckoo search: recent advances and applications[J]. Neural Comput. Appl，2014，24(1)：169-174.
[18] ZHAO Ming，LIN Jing，MIAO Yonghao，et al. Detection and recovery of fault impulses via improved harmonic product spectrum and its application in defect size estimation of train bearings[J]. Measurement，2016，91： 421-439.
[19] 赵晓涛，孙虎儿，姚巍. 基于CYCBD和包络谱的滚动轴承微弱故障特征提取[J]. 机械传动，2020(4)：27-31.ZHAO Xiaotao，SUN Huer，YAO Wei. Feature extraction of weak fault for rolling bearing based on CYCBD and envelope spectrum[J]. Journal of Mechanical Transmission，2020(4)：27-31.

基于布谷鸟搜索算法和最大二阶循环平稳盲解卷积的滚动轴承故障诊断方法

Research on Fault Diagnosis Method of Rolling Bearings Based on Cuckoo Search Algorithm and Maximum Second Order Cyclostationary Blind Deconvolution

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	苗宝权, 陈长征, 罗园庆, 赵思雨. 基于自适应增强差分积形态滤波器的滚动轴承故障特征提取方法[J]. 机械工程学报, 2021, 57(9): 78-88.
[2]	黄伟国, 李仕俊, 毛磊, 马玉强, 王俊, 沈长青, 阙红波, 朱忠奎. 多源稀疏优化方法研究及其在齿轮箱复合故障检测中的应用[J]. 机械工程学报, 2021, 57(7): 87-99.
[3]	周亚波, 池茂儒, 蔡吴斌, 孙建锋, 肖新标. 铁道车辆异常振动噪声的原因分析[J]. 机械工程学报, 2021, 57(4): 148-155.
[4]	叶壮, 余建波. 基于多通道加权卷积神经网络的齿轮箱振动信号特征提取[J]. 机械工程学报, 2021, 57(1): 110-120.
[5]	董绍江, 裴雪武, 吴文亮, 汤宝平, 赵兴新. 基于多层降噪技术及改进卷积神经网络的滚动轴承故障诊断方法[J]. 机械工程学报, 2021, 57(1): 148-156.
[6]	李栋, 刘树林, 孙欣. 针对不连续时变样本空间的连续学习故障诊断方法[J]. 机械工程学报, 2021, 57(1): 157-167.
[7]	郑怀亮, 王日新, 杨远涛, 尹建程, 徐敏强. 数据驱动故障诊断方法泛化性能的经验性分析[J]. 机械工程学报, 2020, 56(9): 102-117.
[8]	郑近德, 潘海洋, 程军圣, 包家汉, 刘庆运, 丁克勤. 基于自适应经验傅里叶分解的机械故障诊断方法[J]. 机械工程学报, 2020, 56(9): 125-136.
[9]	李志农, 刘杰, 卢文秀, 褚福磊. 转子系统盘轴松动故障动力学建模和仿真研究[J]. 机械工程学报, 2020, 56(7): 60-71.
[10]	周兴康, 余建波. 基于深度一维残差卷积自编码网络的齿轮箱故障诊断[J]. 机械工程学报, 2020, 56(7): 96-108.
[11]	朱建新, 陈学东, 吕宝林, 王溢芳, 乔松, 陈嘉宏. 基于多维高斯贝叶斯的机械设备失效/故障智能诊断及参数影响分析[J]. 机械工程学报, 2020, 56(4): 35-41.
[12]	赵德尊, 王天杨, 褚福磊. 基于自适应广义解调变换的滚动轴承时变非平稳故障特征提取[J]. 机械工程学报, 2020, 56(3): 80-87.
[13]	高贵兵, 王俊深, 岳文辉, 彭建华. 基于脆弱性的制造设备故障智能诊断与维护[J]. 机械工程学报, 2020, 56(23): 141-149.
[14]	胡爱军, 许莎, 向玲, 张军华. 滚动轴承外圈多点故障特征分析[J]. 机械工程学报, 2020, 56(21): 110-120.
[15]	陈是扦, 彭志科, 周鹏. 信号分解及其在机械故障诊断中的应用研究综述[J]. 机械工程学报, 2020, 56(17): 91-107.