抛物面式固体反射面天线结构的展开设计

doi:10.3901/JME.2020.05.021

机械工程学报 ›› 2020, Vol. 56 ›› Issue (5): 21-28.doi: 10.3901/JME.2020.05.021

• 航天重器——空间大型可展机构与装备专刊 • 上一篇下一篇

抛物面式固体反射面天线结构的展开设计

张骞¹, 李萌², 江超¹, 蔡建国¹, 冯健¹

1. 东南大学国家预应力工程技术中心南京 211100;
2. 中国空间技术研究院钱学森空间技术实验室北京 100094

收稿日期:2019-02-18 修回日期:2019-07-24 出版日期:2020-03-05 发布日期:2020-04-23
通讯作者: 蔡建国(通信作者),男,1984年出生,博士,教授,博士研究生导师。主要研究方向为新型折叠与展开结构、折纸结构。E-mail:j.cai@seu.edu.cn
作者简介:张骞,男,1994年出生,博士研究生。主要研究方向为折纸结构。E-mail:qianzhang@seu.edu.cn
基金资助:
国家自然科学基金（51822805）和江苏省自然科学基金优秀青年基金（BK20170083）资助项目。

Deployment Design of the Parabolic Solid Reflector Antenna Structure

ZHANG Qian¹, LI Meng², JIANG Chao¹, CAI Jianguo¹, FENG Jian¹

1. National Prestress Engineering Research Center, Southeast University, Nanjing 211100;
2. Qian Xuesen Laboratory of Space Technology, China Academy of Space Technology, Beijing 100094

Received:2019-02-18 Revised:2019-07-24 Online:2020-03-05 Published:2020-04-23

摘要/Abstract

摘要： 针对固体反射面可展天线结构的分块数量和包络尺寸等实际需求，对抛物面刚性可展天线结构进行分块优化和连接设计。依据可动性分析，分块优化选用双自由度的单顶点五折痕模式，但是通过约束折痕转动实现反射面运动路径可控。采用平面单位圆模型定性分析分块节点的几何参数对机构收纳比的影响。以收纳比为优化目标函数，以刚性约束、碰撞约束和可动性约束为优化约束条件，建立抛物面刚性可展天线结构的优化框架，并采用1stOpt结合简面体爬山法结合通用全局优化算法计算分块参数。针对面板转动过程碰撞问题，进行了面板连接节点和转动轴设计。仿真分析和3D打印分块模型结果说明该方法的可行性和合理性。

关键词: 抛物面固体反射面, 可展开天线, 单顶点五折痕折纸模式, 优化设计

Abstract: According to the actual requirements of limitation on the number of blocks and envelope size of solid reflector deployable antenna structure, the block optimization and connection design of parabolic rigid deployable antenna structure are conducted. The single-vertex five creases origami pattern with two degrees of freedom is selected for block optimization based on the mobility analysis, but one crease is limited to rotate in order to ensure that the motion path of the reflector can be controlled effectively. A plane unit circle model is used to qualitatively analyze the influence of geometric parameters on the storage ratio of reflector mechanism. The optimization framework of parabolic rigid deployable antenna structure is established by taking the storage ratio as the objective function and taking the rigid constraints, collision constraints and mobility constraints as the optimization constraints. The design parameters of panels are calculated by 1stOpt combined with the simplex method and general global optimization algorithm (SM-GO). Connections and rotating shafts are designed to solve the collision problem in the process of panel rotation. Simulation analysis and 3D print blocks model are given to demonstrate the feasibility and rationality of the method.

Key words: parabolic solid reflector, deployable antenna, single-vertex five-creases origami pattern, optimization design

中图分类号:

V414

张骞, 李萌, 江超, 蔡建国, 冯健. 抛物面式固体反射面天线结构的展开设计[J]. 机械工程学报, 2020, 56(5): 21-28.

ZHANG Qian, LI Meng, JIANG Chao, CAI Jianguo, FENG Jian. Deployment Design of the Parabolic Solid Reflector Antenna Structure[J]. Journal of Mechanical Engineering, 2020, 56(5): 21-28.

参考文献

[1] 林昌禄. 天线工程手册[M]. 北京:电子工业出版社,2002. LIN Changlu. Antenna engineering handbook[M]. Beijing:Publishing House of Electronics Industry,2002.
[2] FREELAND R E,BILYEU G D,VEAL G R,et al. Large inflatable deployable antenna flight experiment results[J]. Acta Astronautica,1997,41(4-10):267-277.
[3] Huang J. The development of inflatable array antennas[J]. IEEE Antennas and Propagation Magazine,2001,43(4):44-50.
[4] Gunnar T. Deployable tensegrity structures for space applications[D]. Stockholm:Royal Institute of technology Department of Mechanics,2002.
[5] HANAYAMA E,KURODA S,TAKANO T T,et al. Characteristics of the large deployable antenna on halca satellite in orbit[J]. IEEE Transactions on Antennas and Propagation,2004,52(7):1777-1782.
[6] TAKANO T,MIURA K,NATORI M,et al. Deployable antenna with 10-m maximum diameter for space use[J]. IEEE Transactions on Antennas and Propagation,2004,52(1):2-11.
[7] MEGURO A,ISHIKAWA H,TSUJIHATA A. Study on ground verification for large deployable modular structures[J]. Journal of Spacecraft and Rockets,2006,43(4):780-787.
[8] GUEST S D,PELLEGRINO S. A new concept for solid surface deployable antennas[J]. Acta Astronautica,1996,38(2):103-113.
[9] GUEST S D. Deployable structures:Concepts and analysis[D]. Cambridge:University of Cambridge,1994.
[10] YOU Z.Deployable structures for masts and reflector antennas[D]. Cambridge:University of Cambridge,1994.
[11] GUEST S D,PELLEGRINO S. A new concept for solid surface deployable antennas[J]. Acta Astronautica,1996,38(2):103-113.
[12] POPOV M. Status and main parameters of space VLBI mission RadioAstron[C]//General Assembly & Scientific Symposium. IEEE,2011:1-4.
[13] BUJAKAS V I. New design of petal type deployable space mirror[C]//Multibody Mechatronic Sysyems,2015:391-398.
[14] 马亚静,杜敬利,段宝岩,等. 考虑支撑桁架变形的星载索网反射面天线形态设计方法[J]. 机械工程学报,2015,51(17):114-119. MA Yajing,DU Jingli,DUAN Baoyan,et al. A method to design the initial equilibrium state of spaceborne cable-net antenna considering the flexibility of supporting trusses[J]. Journal of Mechanical Engineering,2015,51(17):114-119.
[15] 张逸群,段宝岩,李团结. 基于滤波的柔性可展开天线展开过程控制方法[J]. 机械工程学报,2012,48(3):180-188. ZHANG Yiqun,DUAN Baoyan,LI Tuanjie. Deployment control method for flexible deployable antennas based on FFT filter[J]. Journal of Mechanical Engineering,2012,48(3):180-188.
[16] 刘荣强,田大可,邓宗全. 空间可展开天线结构的研究现状与展望[J]. 机械设计,2010,27(9):1-10. LIU Rongqiang,TIAN Dake,DENG Zongquan. Research actuality and prospect of structure for space deployable antenna[J]. Journal of Machine Design,2010,27(9):1-10.
[17] 李杨. 花瓣式展开天线结构设计与试验研究[D]. 哈尔滨:哈尔滨工程大学,2012. LI Yang. Petal-type deployable antenna design and experimental study[D]. Harbin:Harbin Engineering University,2012.
[18] 广晨汉,刘迎,杨洋. 单顶点多折痕折纸形式启发的空间折展机构[J]. 宇航学报,2018,39(7):801-807. GUANG Chenhan,LIU Ying,YANG Yang. A space deployable mechanism inspired by single-vertex multi-crease origami pattern[J]. Journal of Astronautics,2018,39(7):801-807.
[19] 潘亮来,关富玲,黄河. 星载刚性可展开抛物面的设计与展开分析[J]. 空间结构,2018,24(2):67-71. PAN Lianglai,GUAN Fuling,HUANG He. Design and unfolding analysis of rigid deployable parabolic reflector for space borne platform[J]. Spatial Structures,2018,24(2):67-71.
[20] MCADAMS D A,LI W. A novel method to design and optimize flat-foldable origami structures through a genetic algorithm[J]. Journal of Computing and Information Science in Engineering,2014,14:031008-1.
[21] FUCHI K,DIAZ A R. Origami design by topology optimization[J]. Journal of Mechanical Design,2013,135:111003-1.

抛物面式固体反射面天线结构的展开设计

Deployment Design of the Parabolic Solid Reflector Antenna Structure

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	刘荣强, 史创, 郭宏伟, 李冰岩, 田大可, 邓宗全. 空间可展开天线机构研究与展望[J]. 机械工程学报, 2020, 56(5): 1-12.
[2]	刘今越, 赵睿, 贾晓辉, 郭士杰, 武晓峰, 顾建军. 手指关节可独立控制的欠驱动灵巧手[J]. 机械工程学报, 2020, 56(3): 47-55.
[3]	张飞, 张彬, 周烽, 尚伟伟, 丛爽. 面向自动仓储的绳索牵引并联机器人构型选择与参数优化[J]. 机械工程学报, 2020, 56(1): 1-8.
[4]	梁兴鑫, 严新平, 欧阳武, 刘正林. 弹支可倾瓦推力轴承弹性垫最佳偏心率的影响因素[J]. 机械工程学报, 2020, 56(1): 91-99.
[5]	周荣晶, 李云峰, 纪宇阳, 陈栎, 孔令豹, 朱志伟. 基于混合驱动的大行程快速刀具伺服设计与控制[J]. 机械工程学报, 2019, 55(21): 199-207.
[6]	李佳杰, 陈贵敏. 柔性二级差动式微位移放大机构优化设计[J]. 机械工程学报, 2019, 55(21): 21-28.
[7]	李明, 刘楠, 王大海. 500 km/h高速列车新头型设计及气动性能研究[J]. 机械工程学报, 2019, 55(18): 142-149.
[8]	毕祥军, 陈炳全, 吴浩, 王立朋, 蒋亮亮, 王博, 周才华. 运载火箭线式捆绑分离装置的设计、分析与优化[J]. 机械工程学报, 2019, 55(14): 60-68.
[9]	廖永宜, 廖伯瑜. 基于模态柔度和能量分布的机床动态优化设计[J]. 机械工程学报, 2018, 54(23): 192-198.
[10]	王少杰, 侯亮, 方奕凯, 林浩菁, 郭涛, 焦建新. 考虑产品运行大数据的装载机变速箱优化设计[J]. 机械工程学报, 2018, 54(22): 218-232.
[11]	王浩伟, 周源, 滕飞, 盖炳良. 基于加速因子不变原则的加速退化试验优化设计[J]. 机械工程学报, 2018, 54(18): 212-219.
[12]	张军, 张晓林, 方吉. 动车组车体模态灵敏度及优化设计研究[J]. 机械工程学报, 2018, 54(12): 93-101.
[13]	鲁军,苏超锋. 磁控形状记忆合金传感器优化设计[J]. 电气工程学报, 2018, 13(12): 1-6.
[14]	夏毅敏, 林赉贶, 贺飞, 吴遁, 李正光, 暨智勇. 盘形滚刀刀圈结构地质适应性设计方法[J]. 机械工程学报, 2018, 54(1): 10-17.
[15]	金诚明, 彭叶辉, 刘德顺. 热声制冷机板叠性能指标数值计算与遗传算法优化[J]. 机械工程学报, 2017, 53(20): 145-152.