[1] LU Haoqi. Status of the JUNO reactor anti-neutrino experiment[J]. Nuclear and Particle Physics Proceedings,2017,287:143-146.
[2] WANG Yuanqing,ZONG Liang,HENG Yuekun,et al. Application of acrylic vessel supported by stainless steel truss for JUNO central detector[J]. China Science Technology Science,2014,57(12):2523-2529
[3] VANNUCCI F. Interactions of neutrinos with matter[J]. Progress in Particle and Nuclear Physics,2017,95:1-47.
[4] CHANG Yaping,HUANG Guorui, HENG Yuekun, et al. The R&D of the 20 in MCP-PMTs for JUNO[J]. Nuclear Instruments and Methods in Physics Research,Section A:Accelerators,Spectrometers,Detectors and Associated Equipment,2016,824:143-144.
[5] LUO Fengjiao,HENG Yuekun,WANG Zhimin, et al. PMT overshoot study for the JUNO prototype detector[J]. Chinese Physics C,2016(9):89-94.
[6] WANG Yifang,QIAN Sen,ZHAO Tianchi,et al. A new design of large area MCP-PMT for the next generation neutrino experiment[J]. Nuclear Instruments and Methods in Physics Research Section A:Accelerators,Spectrometers,Detectors and Associated Equipment,2012,695:113-117.
[7] YANG Anbo,WANG Zhimin,QIN Zhonghua,et al. The study of linearity and detection efficiency for 20″ photomultiplier tube[J]. Radiat Detect Technol Methods,2019:3-11.
[8] 李坚辉,张绪刚,张斌,等. 改性剂对环氧灌封胶性能的影响[J]. 化学与黏合,2012,34(5):33-39. LI Jianhui,ZHANG Xugang,ZHANG Bin,et al. The effect of modifier on the properties of epoxy encapsulants[J]. Chemistry and Adhesion,2012,34(5):33-39.
[9] 徐仲安,王天保,李常英,等.正交试验设计法简介[J].科技情报开发与经济,2002,12(5):148-150. XU Zhongan,WANG Tianbao,LI Changying,et al. Brief introduction to the orthogonal test design[J]. Tech Information Development & Economy,2002,12(5):148-150.
[10] 刘瑞江,张业旺,闻崇炜,等. 正交试验设计和分析方法研究[J]. 实验技术与管理,2010,27(9):52-55. LIU Ruijiang,ZHANG Yewang,WEN Chongwei,et al. Study on the design and analysis methods of orthogonal experiment[J]. Experimental Technology and Management,2010,27(9):52-55.
[11] 王仲仁,苑世剑,胡连喜,等. 弹性与塑性力学基础[M]. 哈尔滨:哈尔滨工业大学出版社,2007. WANG Zhongren,YUAN Shijian,HU Lianxi,et al. Harbin:Fundamentals of elasticity and plasticity mechanics[M]. Harbin:Harbin Institute of Technology, 2007.
[12] 王勖成. 有限单元法[M]. 北京:清华大学出版社,2003. WANG Xucheng. Finite element method[M]. Beijing:Tsinghua University Press, 2003.
[13] 梅凤翔,周际平,水小平. 工程力学[M]. 北京:高等教育出版社, 2003. MEI Fengxiang,ZHOU Jiping,SHUI Xiaoping. Engineering mechanics[M]. Beijing:Higher Education Press, 2013.
[14] 龙凯,左正兴. 热结构稳态相应下的敏度分析方法和形状优化[J]. 机械工程学报,2007,43(8):72-76. LONG Kai,ZUO Zhengxing. Sensitivity analysis method and shape optimization of thermo-structural steady response[J]. Chinese Journal of Mechanical Engineering,2007,43(8):72-76. |