球头铣刀余摆线加工表面形貌的建模与仿真研究

doi:10.3901/JME.2018.19.212

摘要/Abstract

摘要： 余摆线铣削因切削力小、表面质量和生产率高，而广泛应用于高速加工中。球头铣刀因适应性好，且姿态可灵活调整，而成为多轴加工复杂表面的常用刀具。然而，球头铣刀齿形复杂，余摆线铣削的运动轨迹方向不断变化，工件的材料去除和表面形貌的创成过程异常复杂，传统方法建模困难。提出一种球头铣刀余摆线加工表面形貌的数值仿真方法，根据齐次坐标矩阵变换原理建立刀齿的运动轨迹方程，通过改进Z-MAP算法完成了加工表面形貌的仿真。该算法通过建立刀齿微元的随动矩形包围圈和瞬时扫掠四边形，使用角度累加法快速地获取刀齿微元在单位时间步长内扫掠到的工件网格点，根据多元函数的泰勒公式，用线性插值的方法求出该网格点的高度坐标。仿真结果表明球头铣刀余摆线铣削的表面形貌整体上优于普通直线铣削。试验结果表明，在垂直和倾斜加工条件下，球头铣刀余摆线铣削获得的表面形貌与仿真结果具有较高的一致性，说明所提出的方法可以预测球头铣刀余摆线的加工表面形貌。

关键词: 表面形貌, 仿真, 改进Z-MAP法, 球头铣刀, 余摆线铣削方法

Abstract: Trochoidal milling mode has small cutting force, high surface quality and productivity, which is widely used in the high speed and velocity machining. Due to a good adaptability and flexible adjustment of orientation, ball end milling cutter is commonly used for multi-axis machining complex surface. However, the processes of part material removal and the machined surface formation is very complicated and difficult to describe because the tooth profile of ball end milling cutter is complex and the direction of cutter trajectory changes continuously in trochoidal milling process. A numerical simulation method is put forward to simulate the surface topography milled with ball end milling cutter which is based on the principle of homogeneous coordinate transformation matrix to establish the locus equation of cutter tooth, and finish the surface topography simulation by improving Z-MAP algorithm. The algorithm quickly obtain the part grid nodes perhaps swept by the cutter tooth within unit time step through the establishment of servo rectangular encirclement and instantaneous scanning quadrilateral of the basic unit of the cutter tooth, and on these bases the part grid node really swept is determined through the angle sum method, and the height coordinate is calculated using the method of linear interpolation according to Taylor formula of multivariate function. The results show that ball end milling surface topography obtained by trochoidal milling is superior to the ordinary straight line milling on the whole. Experimental validation results show that no matter in the case of vertical or tilting machining, surface topography of trochoidal milling with ball end cutter is high consistency with the simulated ones, and the proposed method can predict the surface topography in practical manufacturing.

Key words: ball end milling cutter, improved Z-MAP method, simulation, surface topography, trochoidal milling

中图分类号:

TH161
TG54

董永亨, 李淑娟, 李言, 李鹏阳, 杨振朝, 辛彬. 球头铣刀余摆线加工表面形貌的建模与仿真研究[J]. 机械工程学报, 2018, 54(19): 212-223.

DONG Yongheng, LI Shujuan, LI Yan, LI Pengyang, YANG Zhenchao, XIN Bin. Research on Modeling and Simulation of Surface Topography Obtained by Trochoidal Milling Mode with Ball End Milling Cutter[J]. Journal of Mechanical Engineering, 2018, 54(19): 212-223.

参考文献

[1] OTKUR M,LAZOGLU I. Trochoidal milling[J]. International Journal of Machine Tools & Manufacture,2007,47(9):1324-1332.
[2] WU Shixiong,MA Wei,LI Bin,et al. Trochoidal machining for the high-speed milling of pockets[J]. Journal of Materials Processing Technology,2016,233:29-43.
[3] UHLMANN E,FURSTMANN P,ROSENAU B,et al. The potential of reducing the energy consumption for machining TiAl6V4 by using innovative metal cutting processes[C]//Global Conference on Sustainable Manufacturing,September 23-25,2013,Universitätsverlag der TU,Berlin:CIRP,2013:593-598.
[4] PLETA A. Investigation of trochoidal milling in nickel-based superalloy inconel 738 and comparison with end milling[J]. Journal of Veterinary Behavior Clinical Applications & Research,2014,8(4):36-37.
[5] POLISHETTY A,GOLDBERG M,LITTLEFAIR G,et al. A preliminary assessment of machinability of titanium alloy ti 6AL 4V during thin wall machining using trochoidal milling[J]. Procedia Engineering,2014,97:357-364.
[6] FERREIRA J C E,OCHOA D M. A method for generating trochoidal tool paths for 2½D pocket milling process planning with multiple tools[J]. Proceedings of the Institution of Mechanical Engineers Part B,Journal of Engineering Manufacture,2013,227(9):1287-1298.
[7] WU Shixiong,ZHAO Zhenyu,WANG Chengyong,et al. Optimization of toolpath with circular cycle transition for sharp corners in pocket milling[J]. International Journal of Advanced Manufacturing Technology,2016:1-11.
[8] ZHANG Xinghong,PENG Fangyu,QIU Feng,et al. Prediction of cutting force in trochoidal milling based on radial depth of cut[J]. Advanced Materials Research,2014,852(852):457-462.
[9] WANG H X,ZONG W J,SUN T,et al. Modification of three dimensional topography of the machined KDP crystal surface using wavelet analysis method[J]. Applied Surface Science,2010,256(16):5061-5068.
[10] AIT-SADI H,HEMMOUCHE L,HATTALI L,et al. Effect of nanosilica additive particles on both friction and wear performance of mild steel/CuSn/SnBi multimaterial system[J]. Tribology International,2015,90:372-385.
[11] CHOI Y,LEE J. A study on the effects of surface dimple geometry on fretting fatigue performance[J]. International Journal of Precision Engineering & Manufacturing,2015,16(4):707-713.
[12] ZHANG Yongbin. Recent patents on the design of surface topography for improving the performance of a lubricated sliding contact[J]. Recent Patents on Mechanical Engineering,2015,8(1):59-63.
[13] 胡兆稳,刘焜,刘小君,等. 表面形貌变形对塑性成形滑动接触界面摩擦的影响[J]. 摩擦学学报,2015,35(4):368-377. HU Zhaowen,LIU Kun,LIU Xiaojun,et al. Influence of surface topography deformation on friction at sliding contact interface in metal forming[J]. Tribology,2015,35(4):368-377.
[14] 梁鑫光,姚振强. 基于动力学响应的球头刀五轴铣削表面形貌仿真[J]. 机械工程学报,2013,49(6):171-178. LIANG Xinguang,YAO Zhenqiang. Dynamic-based simulation for machined surface topography in 5-axis ball-end milling[J]. Journal of Mechanical Engineering,2013,49(6):171-178.
[15] LIU N,LOFTUS M,WHITTEN A. Surface finish visualisation in high speed,ball nose milling applications[J]. International Journal of Machine Tools and Manufacture,2005,45(10):1152-1161.
[16] SADEGHI M H,HAGHIGHAT H,ELBESTAWI M A. A solid modeler based ball-end milling process simulation[J]. International Journal of Advanced Manufacturing Technology,2003,22(22):775-785.
[17] IMANI B M,ELBESTAWI M A. Geometric simulation of ball-end milling operations[J]. Journal of Manufacturing Science and Engineering,2001,123(2):177.
[18] JUNG T S,YANG M Y,LEE K J. A new approach to analysing machined surfaces by ball-end milling,part I[J]. The International Journal of Advanced Manufacturing Technology,2004,25(9-10):833-840.
[19] JUNG T S,YANG M Y,LEE K J. A new approach to analysing machined surfaces by ball-end milling,part Ⅱ[J]. The International Journal of Advanced Manufacturing Technology,2004,25(9-10):841-849.
[20] YANG J X,GUAN J Y,XUE F Y E,et al. Effects of geometric and spindle errors on the quality of end turning surface[J]. Journal of Zhejiang University A,2015,16(5):371-386.
[21] 王秋燕,梁志强,王西彬,等. 超声振动螺线磨削表面微观形貌建模与仿真研究[J]. 机械工程学报,2017,53(19):83-89. WANG Qiuyan,LIANG Zhiqiang,WANG Xibin,et al. Research on modeling and simulation of surface microtopography in ultrasonic vibration spiral grinding[J]. Journal of Mechanical Engineering,2017,53(19):83-89.
[22] 党建卫,张卫红,万敏,等. 周铣过程中加工误差预测新模型[J]. 机械工程学报,2011,47(17):150-155. DANG Jianwei,ZHANG Weihong,WAN Min,et al. A novel model for predicting machining error in peripheral milling process[J]. Journal of Mechanical Engineering,2011,47(17):150-5.
[23] OMAR O E E K,EL-WARDANY T,NG E,et al. An improved cutting force and surface topography prediction model in end milling[J]. International Journal of Machine Tools and Manufacture,2007,47(7-8):1263-1275.
[24] SCHMITZ T L,COUEY J,MARSH E,et al. Runout effects in milling:Surface finish,surface location error,and stability[J]. International Journal of Machine Tools and Manufacture,2007,47(5):841-851.
[25] ARIZMENDI M,CAMPA F J,FERN NDEZ J,et al. Model for surface topography prediction in peripheral milling considering tool vibration[J]. CIRP Annals-Manufacturing Technology,2009,58(1):93-96.
[26] HU Weixin,GUAN Jiayan,LI Bo,et al. Influence of tool assembly error on machined surface in peripheral milling process[J]. Procedia CIRP,2015,27:137-142.
[27] 李忠群,刘强,郑敏,等. 基于Z-map的弱刚性系统高速周铣表面加工精度[J]. 华中科技大学学报,2012,40(S2):52-55. LI Zhongqun,LIU Qiang,ZHENG Min,et al. Z-map based surface machining accuracy in high speed peripherial milling of flexiable system[J]. Journal of HuaZhong University of Science and Technology,2012,40(S2):52-55.
[28] 高彤,张卫红,邱克鹏,等. 周铣加工表面形貌仿真新算法[J]. 西北工业大学学报,2004,22(2):221-224. GAO Tong,ZHANG Weihong,QIU Kepeng,et al. A new algorithm of simulation on peripherial milling surface topography[J]. Journal of Nor th western Polytechnical University,2004,22(2):221-224.
[29] GAO Tong,ZHANG Weihong,QIU Kepeng,et al. Numerical simulation of machined surface topography and roughness in milling process[J]. Journal of Manufacturing Science and Engineering,2006,128(1):96.
[30] LAVERNHE S,QUINSAT Y,LARTIGUE C. Model for the prediction of 3D surface topography in 5-axis milling[J]. The International Journal of Advanced Manufacturing Technology,2010,51(9-12):915-924.
[31] FRANCO P,ESTREMS M,FAURA F. A study of back cutting surface finish from tool errors and machine tool deviations during face milling[J]. International Journal of Machine Tools and Manufacture,2008,48(1):112-123.
[32] LIU Xianbing,SOSHI M,SAHASRABUDHE A,et al. A geometrical simulation system of ball end finish milling process and its application for the prediction of surface micro features[J]. Journal of Manufacturing Science and Engineering. 2006,128(1):74.
[33] 阎兵,张大卫. 球头铣刀铣削表面形貌建模与仿真[J]. 计算机辅助设计与图形学学报,2001,13(2):135-140. YAN Bing,ZHANG Dawei. Modeling and simulation of ball end milling surface topology[J]. Journal of Computer Aided Design and Graphics,2001,13(2):135-140.
[34] 赵晓明,胡德金,赵国伟. 5坐标数控加工中工件表面形貌的计算机仿真[J]. 上海交通大学学报,2003,37(5):690-694. ZHAO Xiaoming,HU Dejin,ZHAO Guowei. Simulation of workpiece surface texture in 5-axis control machining[J]. Journal of Shanghai Jiao Tong University,2003,37(5):690-694.
[35] ZHANG Chen,ZHANG Haiyan,LI Yingguang,et al. Modeling and on-line simulation of surface topography considering tool wear in multi-axis milling process[J]. The International Journal of Advanced Manufacturing Technology,2014,77(1-4):735-749.
[36] BOUZAKIS K D,AICHOUH P,EFSTATHIOU K. Determination of the chip geometry,cutting force and roughness in free form surfaces finishing milling,with ball end tools[J]. International Journal of Machine Tools and Manufacture,2003,43(5):499-514.
[37] ANTONIADIS A,SAVAKIS C,BILALIS N,et al. Prediction of surface topomorphy and roughness in ball-end milling[J]. International Journal of Advanced Manufacturing Technology,2003,21(12):965-971.
[38] 王明海,李世永,郑耀辉. 超声铣削钛合金材料表面粗糙度研究[J]. 农业机械学报,2014,45(6):341-346. WANG Minghai,LI Shiyong,ZHENG Yaohui. Surface roughness of titanium alloy under ultrasonic vibration milling[J]. Journal of Agricultural Machinery,2014,45(6):341-346
[39] CHEN Jenqshyong,HUANG Yungkuo,CHEN Maoson. A study of the surface scallop generating mechanism in the ball-end milling process[J]. International Journal of Machine Tools and Manufacture,2005,45(9):1077-1084.
[40] 张广鹏,张雎军,徐光月,等. 面铣刀铣削表面微观几何形貌仿真[J]. 系统仿真学报,2009,21(9):2496-2499. ZHANG Guangpeng,ZHANG Jujun,XU Guangyue,et al. Simulation of micro geomatrical texture of surface milled by face milling cutter[J]. Journal of System Simulation,2009,21(9):2496-2499.
[41] 刘丽娟,吕明,武文革,等. 高速铣削钛合金Ti-6Al-4V切屑形态试验研究[J]. 机械工程学报,2015,51(3):196-205. LIU Lijuan,LÜ Ming,WU Wenge,et al. Experimental study on the chip morpholgy in high speed milling Ti-6Al-4V alloy[J]. Journal of Mechanical Engineering,2015,51(3):196-205.
[42] DONG W P,SULLIVAN P J,STOUT K J. Comprehensive study of parameters for characterising three dimensional surface topography IV_Parameters for characterising spatial and hybrid properties[J]. Wear,1994,178(1-2):29-43.
[43] DONG W P,SULLIVAN P J,STOUT K J. Comprehensive study of parameters for characterising three-dimensional surface topography:Ⅲ:Parameters for characterising amplitude and some functional properties[J]. Wear,1994,178(1):45-60.
[44] 董永亨,李淑娟,李言,等. 基于改进Z-MAP算法的球头铣刀加工表面形貌仿真与试验研究[J]. 机械工程学报,2017,53(23):197-208. DONG Yongheng,LI Shujuan,LI Yan,et al. Simulation and experimental study of ball-end milling surface topography based on an improved Z-MAP algorithm[J]. Journal of Mechanical Engineering,2017,53(23):197-208.