基于参数识别的桥梁冲击系数随机响应优化方法

doi:10.3901/JME.2018.12.064

机械工程学报 ›› 2018, Vol. 54 ›› Issue (12): 64-70.doi: 10.3901/JME.2018.12.064

• 特邀专栏：大国重器：复兴之路上的轨道交通技术 • 上一篇下一篇

基于参数识别的桥梁冲击系数随机响应优化方法

徐文涛^1,2, 廖敬波², 张泽通¹, 陈永杰¹, 唐光武²

1. 郑州大学力学与工程科学学院郑州 450001;
2. 重庆交通科研设计院桥梁工程结构动力学国家重点试验室重庆 400067

收稿日期:2017-03-06 修回日期:2018-01-24 出版日期:2018-06-20 发布日期:2018-06-20
通讯作者: 廖敬波(通信作者),男,1980年出生,硕士,高级工程师。主要研究方向为桥梁健康监测、桥梁结构动力学。E-mail:liaojingbo@cmnk.com
作者简介:徐文涛,男,1980年出生,副教授,硕士研究生导师。主要从事随机振动、结构动力学、车辆工程方向的研究。E-mail:xuwt@zzu.edu.cn
基金资助:
国家自然科学基金（11402235）、河南省博士后基金项目和重庆科技人才培养计划（cstc2014kjrc-qnrc20003）资助项目。

Numerical Method Study of Key Factor Identification and Parameter Optimization for Dynamic Impact on Bridge Based on the Pseudo-excitation Method

XU Wentao^1,2, LIAO Jingbo², ZHANG Zetong¹, CHEN Yongjie¹, TANG Guangwu²

1. School of Mechanics & Engineering Science, Zhengzhou University, Zhengzhou 450001;
2. State Key Laboratory of Bridge Engineering Structural Dynamics, Chongqing Communications Research & Design Institute, Chongqing 400067

Received:2017-03-06 Revised:2018-01-24 Online:2018-06-20 Published:2018-06-20

摘要/Abstract

摘要： 随着行车速度的不断增高，路面高低随机不平顺引起车桥结构强烈的耦合振动严重影响工程结构的服役性能，乘客舒适性、桥梁及车辆的安全性受到大量的关注。在设计领域，动力学分析及优化受到诸多困难的干扰。将虚拟激励法与辛数学方法相结合对车桥系统动态响应进行数值分析，基于正交分析技术建立影响因素强度分析，以识别设计因素的相对重要性，例如车辆重量、刚度、速度、轨道不平顺、接触模型、桥梁跨度、支撑形式和材料参数。基于参数重要度推导基于虚拟激励法的高效灵敏度分析方法用于优化关键因素，并用数值算例证明了方法的准确性和计算效率。结果表明，影响桥梁各个位置的因素差异很大，冲击系数随着桥表面的粗糙度增加而增加，影响因素主要是车辆悬架刚度、阻尼和速度参数，并通过参数优化有效降低了主要影响因素对桥梁的影响。

关键词: 车桥耦合系统, 灵敏度分析, 随机振动, 正交试验

Abstract: Because of increased vehicle speed, engineers must pay more attention to the comfort of passengers and the safety of trains and bridges. This requires analysis and optimization of factors that may affect the dynamic behavior of the vehicle-bridge system. The need for a large number of repeated random vibration computations for complicated vehicle-bridge coupling systems causes serious difficulties in design. These difficulties have been overcome by combining the pseudo-excitation method with the symplectic mathematical method. The orthogonal experimental approach is used to identify the relative importance of factors affecting design such as vehicle weight, vehicle stiffness, velocity, track irregularity, contact model, bridge span, support style and material parameters. An efficient sensitivity analysis method based on PEM is used to optimize the key factors. Numerical examples demonstrate the accuracy and efficiency of the model. The results show that the factors impacting various positions on the bridge differ greatly. Impact factors increase with increased roughness of the bridge surface. The primary parameters that affect the impact factors are the bridge suspension stiffness, damping, and vehicle velocity. The impact of factors affecting the bridge is effectively decreased by parameter optimization.

Key words: orthogonal experiment, random vibration, sensitivity analysis, vehicle-bridge coupled system

中图分类号:

TU311

徐文涛, 廖敬波, 张泽通, 陈永杰, 唐光武. 基于参数识别的桥梁冲击系数随机响应优化方法[J]. 机械工程学报, 2018, 54(12): 64-70.

XU Wentao, LIAO Jingbo, ZHANG Zetong, CHEN Yongjie, TANG Guangwu. Numerical Method Study of Key Factor Identification and Parameter Optimization for Dynamic Impact on Bridge Based on the Pseudo-excitation Method[J]. Journal of Mechanical Engineering, 2018, 54(12): 64-70.

参考文献

[1] ZHONG Hai,YANG Mijia,GAO Zhili. Dynamic responses of prestressed bridge and vehicle through bridge-vehicle interaction analysis[J]. Engineering Structures,2015,87(15):116-125.
[2] CONNOLLY D P,KOUROUSSIS G,LAGHROUCHE O,et al. Benchmarking railway vibrations-track,vehicle,ground and building effects[J]. Construction and Building Materials,2015,92:64-81.
[3] XU Qingyuan,OU Xi,AU F T K,et al. Effects of track irregularities on environmental vibration caused by underground railway[J]. European Journal of Mechanics-A/Solids,2016,59:280-293.
[4] XU Qingyuan,CHEN Xiaoping,YAN Bing,et al. Study on vibration reduction slab track and adjacent transition section in high-speed railway tunnel[J]. Journal of Vibro Engineering,2015,17(2):905-916.
[5] LIN Jiahao,ZHANG Yahui,LI Xingsi,et al. Seismic spatial effects for long-span bridges using the pseudo excitation method[J]. Engineering Structures,2004,26(9):1207-1216.
[6] CHEUNG Yanlung,WONG Waion. and opti-mizations of a dynamic vibration absorber or suppressing vibrations in plates[J]. Journal of Sound and Vibration,2009,320:29-42.
[7] CHEUNG Yanlung,WONG Waion,CHENG Li. Optimization of a hybrid vibration absorber for vibration control of structures under random force excitation[J]. Journal of Sound and Vibration,2013,332:494-509.
[8] ROGERS L C. Derivatives of eigenvalues and eigenvectors[J]. The American Institute of Aeronautics and Astronautics Journal,1970,8(5):943-944.
[9] YANG Renjie. Shape design sensitivity analysis with frequency response[J]. Computers & Structures,1989,33(4):1089-1093.
[10] TAN RCE. Some acceleration methods for iterative computation of derivatives of eigenvalues and eigenvectors[J]. International Journal for Numerical Methods in Engineering,1989,28(7):1505-1520.
[11] PANTELIDES C P,TZAN S R. Optimal design of dynamically constrained structures[J]. Computers & Structures,1997,62(1):141-150.
[12] BELIVEAU J G,COGAN S,LALLEMENT G,et al. Iterative least-squares calculation for modal eigenvector sensitivity[J]. Journal The American Institute of Aeronautics and Astronautics 1996,34(2):385-391.
[13] DURBIN F. Numerical inversion of Laplace transforms:an efficient improvement to Dubner and Abate's method[J]. Computer Journal,1974,17(4):371-376.
[14] 余志生. 汽车理论[M]. 北京:机械工业出版社,2000 Yu Zhisheng. Vehicle theory[M]. Beijing:China Machine Press,2000
[15] ZHANG Zhichao,LIN Jiahao,ZHANG Yahui,et al. Non-stationary random vibration analysis of three-dimensional train-bridge systems[J]. Vehicle System Dynamic,2010,48(4):457-480.
[16] ZHANG Wanxie. Duality system in applied mechanics and optimal control[M]. Boston:Kluwer Academic Pub,2004.
[17] ZHANG Wanxie,WILLIAMS F W. A precise time step integration method[J]. Part C:Journal of Mechanical Engineering Science,1994,208(6):427-430.

基于参数识别的桥梁冲击系数随机响应优化方法

Numerical Method Study of Key Factor Identification and Parameter Optimization for Dynamic Impact on Bridge Based on the Pseudo-excitation Method

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李天箭, 吴晨帆, 沈磊, 孔祥志, 丁晓红. 基于模态预测及敏度分析的机床动特性设计方法[J]. 机械工程学报, 2019, 55(7): 178-186.
[2]	刘可心, 王蕾, 刘佳磊, 金松哲. Ti₂AlN薄膜的制备及性能表征[J]. 机械工程学报, 2019, 55(16): 77-84.
[3]	钱小辉, 马骁妍, 秦中华, 侯少静, 徐美杭, 张鹏, 朱自安. 基于正交试验的玻璃壳热应力影响因素分析[J]. 机械工程学报, 2019, 55(12): 91-98.
[4]	刘洪鹏, 严儒井, 王玉忠, 王擎. 几何特性对风力机翼型粗糙度敏感性的影响[J]. 机械工程学报, 2018, 54(14): 198-206.
[5]	李晓东, 韩硕, 王存宇, 常颖, 胡平, 董瀚. 第三代汽车钢温热成形工艺研究及性能评价[J]. 机械工程学报, 2017, 53(8): 35-42.
[6]	向青春, 张伟, 邱克强, 孙治国, 孙爱新, 杨桂星. 基于DOE的大型下架体铸钢件铸造工艺优化研究^*[J]. 机械工程学报, 2017, 53(6): 88-93.
[7]	陈波, 高殿荣, 杨超, 毋少峰, 张光通. 大功率远程射雾器结构参数多目标智能协同优化^*[J]. 机械工程学报, 2017, 53(6): 166-175.
[8]	王志伟, 戚德彬. 两层计算机堆码包装动力学试验研究^*[J]. 机械工程学报, 2017, 53(3): 90-99.
[9]	丁智平, 黄达勇, 荣继刚, 黄友剑, 曾家兴. 注塑成型短玻纤增强复合材料各向异性弹性常数预测方法[J]. 机械工程学报, 2017, 53(24): 126-134.
[10]	应锐, 喻俊志, 王卫兵, 张亭, 冯静安, 杜晟. 细颗粒分级复合型水力旋流器结构及工艺参数的优化研究^*[J]. 机械工程学报, 2017, 53(2): 124-134.
[11]	丁杰, 张平, 王鹏. 机车车辆设备振动试验标准与实测数据的分析^*[J]. 机械工程学报, 2016, 52(22): 129-137.
[12]	曹丽华, 林阿强, 张岩, 林文斌, 李勇. 基于二次回归正交试验的排汽缸导流环优化设计^*[J]. 机械工程学报, 2016, 52(14): 157-164.
[13]	李祺, 马跃, 黄田. 一种并联动力头静柔度精确预估方法与灵敏度分析[J]. 机械工程学报, 2016, 52(11): 1-10.
[14]	周海超, 梁晨, 杨建, 王国林, 薛开鑫. 提升轮胎抗滑水性能的仿生方法[J]. 机械工程学报, 2015, 51(8): 125-130.
[15]	王尧, 王建梅, 黄玉琴, 项丹. 锡界面层最佳厚度试验与模拟研究[J]. 机械工程学报, 2015, 51(20): 106-113.