基于ACSM法的铁磁构件应力表征

doi:10.3901/JME.2018.10.016

机械工程学报 ›› 2018, Vol. 54 ›› Issue (10): 16-22.doi: 10.3901/JME.2018.10.016

基于ACSM法的铁磁构件应力表征

宋凯¹, 侯凯¹, 王婵², 徐聪¹, 王振¹

1. 南昌航空大学无损检测技术教育部重点实验室南昌 330063;
2. 中国航发动力股份有限公司西安 710021

收稿日期:2017-07-23 修回日期:2017-12-03 出版日期:2018-05-20 发布日期:2018-05-20
通讯作者: 宋凯(通信作者),男,1975年出生,博士,教授。主要研究方向为电磁无损检测新技术等。E-mail:songkai@nchu.edu.cn
作者简介:侯凯,男,1993年出生,硕士研究生。主要研究方向为电磁无损检测新技术。E-mail:1215208627@qq.com
基金资助:
国家自然科学基金（51265041）、国家重大科学仪器设备开发专项（2013YQ140505）、无损检测技术教育部重点实验室基金（EW201708252）和江西省教育厅基金（GJJ151545）资助项目。

Ferromagnetic Components Stress Characterization Based on ACSM

SONG Kai¹, HOU Kai¹, WANG Chan², XU Cong¹, WANG Zhen¹

1. Key Laboratory of Nondestructive Testing, Ministry of Education, Nanchang Hangkong University, Nanchang 330063;
2. Aero Engineering Corporation of China Aviation Power Co. Ltd., Xi'an 710021

Received:2017-07-23 Revised:2017-12-03 Online:2018-05-20 Published:2018-05-20

摘要/Abstract

摘要： 大型机械设备的关键铁磁构件服役工况恶劣，易形成应力集中并可能导致疲劳累积损伤、裂纹等破坏性缺陷，因此准确评价铁磁构件的应力集中程度可有效防止危险性缺陷的产生。研制了用于测量应力的交变磁场应力测量法（Alternating current stress measurement，ACSM）系统，其硬件部分包括检测探头、激励模块、信号调理电路和信号采集模块等，信号采集系统基于LabVIEW软件设计。对Q235钢进行静态应力检测，通过分析检测传感器二维信号的变化特征，研究不同应力程度、激励磁场与应力方向夹角α和激励频率f对ACSM检测信号的影响。试验结果表明：随应力的增加，仅△U_Bx呈线性逐渐增大；激励磁场与应力方向相同时（α=0°），△U_Bx最大值为160 mV，并随α角的增加逐渐变大，当α=90°时达到最大值270 mV；当f ≤ 3 kHz时，检测信号△U_Bx随激励频率的增加呈递增趋势，而f > 3 kHz时，检测信号趋于稳定或减小。

关键词: 二维信号, 交变磁场应力测量法, 铁磁构件, 应力测量

Abstract: The key ferromagnetic components in large-scale machinery and equipment are in poor working condition,easy to form stress concentration,and may lead to fatigue damage and crack damage.The accurate evaluation of the degree of stress concentration of ferromagnetic components can effectively prevent the occurrence of dangerous defects.The ACSM system for measuring stress is developed.The hardware part of the system includes the detection probe、excitation module、the signal conditioning circuit and the signal acquisition module.The signal acquisition system is designed based on LabVIEW software.The static stress of Q235 steel is tested.The influence of different stress levels,angle between excitation magnetic field and stress direction and excitation frequency on ACSM detection signal is studied by analyzing and detecting the change characteristics of two-dimensional signal of probe.The experimental results show that only △U_Bx increases linearly with the increase of stress.When the excitation magnetic field is the same as the stress direction (α=0°),the maximum △U_Bx is 160 mV and becomes larger with the increase of α,Maximum 270 mV when α=0°.When f equal or less than 3 kHz,the detection signal △U_Bx increases with the increase of excitation frequency, otherwise the detection signal tends to be stable or reduced.

Key words: ACSM, ferromagnetic components, stress measurement, two dimensional signal

中图分类号:

TG115

宋凯, 侯凯, 王婵, 徐聪, 王振. 基于ACSM法的铁磁构件应力表征[J]. 机械工程学报, 2018, 54(10): 16-22.

SONG Kai, HOU Kai, WANG Chan, XU Cong, WANG Zhen. Ferromagnetic Components Stress Characterization Based on ACSM[J]. Journal of Mechanical Engineering, 2018, 54(10): 16-22.

参考文献

[1] 朱林, 贾民平, 冯月贵,等. 考虑残余应力重分布情况下的裂纹扩展预测研究[J]. 机械工程学报,2017, 53(8):43-49. ZHU Lin, JIA Minping, FENG Yuegui, et al. Study on crack propagation prediction considering redistribution of residual stress[J]. Journal of Mechanical Engineering, 2017, 53(8):43-49.
[2] 宋凯, 周松蔚, 王婵, 等. ACSM法系统设计及铁磁构件应力测量研究[J]. 传感技术学报, 2014, 27(2):267-272. SONG Kai, ZHOU Songwei, WANG Chan, et al. The system of ACSM and research of stress measurement on ferromagnetic components[J]. Journal of Sensors and Actuators, 2014, 27(2):267-272.
[3] 陈天瑞, 项延训, 陈虎, 等. 基于相位-频率测量的材料残余应力超声表征方法[J]. 机械工程学报, 2016, 52(22):9-14. CHEN Tianrui, XIANG Yanxun, CHEN Hu, et al. Ultrasonic characterization of material residual stress based on phase-frequency measurement[J]. Journal of Mechanical Engineering, 2016, 52(22):9-14.
[4] 阎红娟,徐春广,肖定国,等. 金属材料拉伸应力非线性超声特性研究[J]. 机械工程学报, 2016, 52(6):22-29. YAN Hongjuan, XU Chunguang, XIAO Dingguo, et al. The study of nonlinear ultrasonic characteristics of tensile stress of metal materials[J]. Journal of Mechanical Engineering, 2016, 52(6):22-29.
[5] WANG Renzhi, RU Jilai. Overall evaluation of the effect of residual stress induced by shot peening in the improvement of fatigue fracture resistance for metallic materials[J]. Chinese Journal of Mechanical Engineering, 2015, 28(2):416-421.
[6] 郑卜祥, 宋永伦, 席峰,等. 对接焊铝合金板材残余应力的X射线测试[J]. 机械工程学报, 2009, 45(3):275-281. ZHENG Buxiang, SONG Yonglun, XI Feng, et al. Residual stress measurement of butt-welded aluminium alloy plates by X-ray[J]. Journal of Mechanical Engineering, 2009, 45(3):275-281.
[7] 李大林, 陈鲁, 张其林. X射线衍射法在既有钢结构应力检测中的应用[J]. 施工技术, 2010, 39(9):111-113. LI Dalin, CHEN Lu, ZHANG Qilin. Application of X-ray diffraction method in stress measurement of existing steel strucures[J]. Journal of Construction Technology, 2010, 39(9):111-113.
[8] 胡永会, 吴运新, 陈磊, 等. X射线法测量淬火铝合金厚板表面残余应力[J]. 中国材料进展, 2011, 30(2):51-55. HU Yonghui, WU Yunxin, CHEN Lei, et al. Experimental measurement of surface residual stresses of quenched aluminum alloy thick plate by X-ray method[J]. Journal of Materials China. 2011, 30(2):51-55.
[9] DING X, WU X J, WANG Y G. Bolt Axial stress measurement based on a mode-converted ultrasound method using an electromagnetic acoustic transducer[J]. Ultrasonics, 2014, 54(3):914-920.
[10] 徐春广, 李骁, 潘勤学, 等. 螺栓拉应力超声无损检测方法[J]. 应用声学, 2014, 33(2):102-106. XU Chunguang, LI Xiao, PAN Qinxue, et al. Bolt sress measurements by ultrasonic non-destructive methods[J]. Journal of Applied Acoustics, 2014, 33(2):102-106.
[11] LOW C K, WONG B S. Defect evaluation using the alternating current field measurement technique[J]. Or Insight, 2004, 46(10):598-605.
[12] KNIGHT M J, BRENNAN F P, DOVER W D. Effect of residual stress on ACFM crack measurements in drill collar threaded connections[J]. NDT&E International, 2004, 37(5):337-343.
[13] CHEN K, BRENNAN F P, DOVER W D. Thin-skin AC field in anisotropic rectangular bar and ACPD stress measurement[J]. NDT&E International, 2000, 33(5):317-323.
[14] CHEN K, BRENNAN F P. A theoretical and experimental study of alternating current stress measurement under different loading modes[J]. Journal of Strain Analysis for Engineering Design, 1998, 33(4):291-303.
[15] HAN S, BRENNAN F P, DOVER W D. Development of the alternating current stress measurement model for magnetostriction behavior of mild steel under orthogonal magnetic fields for stress measurement[J]. Journal of Strain Analysis for Engineering Design, 2002, 37(1):21-31.
[16] 曾杰伟, 苏兰海, 徐立坪,等. 逆磁致伸缩效应钢板内应力检测技术研究[J]. 机械工程学报,2014, 50(8):17-22. ZENG Jiewei, SU Lanhai, XU Liping, et al. Research on the stress measurement of steel plate based on inverse magnetostrictinve effect[J]. Journal of Mechanical Engineering, 2014, 50(8):17-22.
[17] 王威. 钢结构磁力耦合应力检测基本理论及应用技术研究[D]. 西安:西安建筑科技大学, 2005. WANG Wei. Study on basic theory and applied technology of steel structure magnetic coupling stress testing[D]. Xi'an:Xi'an University of Architecture & Technology, 2005.

基于ACSM法的铁磁构件应力表征

Ferromagnetic Components Stress Characterization Based on ACSM

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	刘秀成;吴斌;何存富. 磁致伸缩与磁弹一体化传感器的研制[J]. , 2013, 49(22): 46-52.
[2]	张亦良;张庆丰;杨家辉;高萍;姚希梦. 考虑塑性体积变化的弹塑性应力测量理论[J]. , 1999, 35(4): 34-37.