[1] 罗亮,张为民,周敏剑. 滚珠丝杠进给系统动态特性集中质量建模与仿真[J]. 农业机械学报, 2015, 46(12):370-377. LUO Liang, ZHANG Weimin, ZHOU Minjian. Dynamic characteristics modeling and simulation of ball screw feed drive system based on lumped mass model[J]. Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(12):370-377. [2] 卢秉恒,赵万华,张俊,等. 高速高加速度下的进给系统机电耦合[J]. 机械工程学报, 2013, 49(6):2-11. LU Bingheng, ZHAO Wanhua, ZHANG Jun, et al. Electromechanical coupling in the feed system with high speed and high acceleration[J]. Journal of Mechanical Engineering, 2013, 49(6):2-11. [3] 雷杰,邹玮,陆新江,等. 大型模锻装备锻造过程建模与运行分析[J]. 机械工程学报, 2015, 51(18):26-33. LEI Jie, ZOU Wei, LU Xinjiang, et al. Modeling and operating performance analysis for complex forging system[J]. Chinese Journal of Mechanical Engineering, 2015, 51(18):26-33. [4] 刘丽兰,刘宏昭,吴子英,等. 考虑摩擦和间隙影响的机床进给伺服系统建模与分析[J]. 农业机械学报, 2010, 41(11):212-218. LIU Lilan, LIU Hongzhao, WU Ziying, et al. Modeling and analysis of machine tool feed servo systems with friction and backlash[J]. Transactions of the Chinese Society for Agricultural Machinery, 2010, 41(11):212-218. [5] KONG Xiangdong, YU Bin, QUAN Liangxiao, et al. Nonlinear mathematical modeling and sensitivity analysis of hydraulic drive unit[J]. Chinese Journal of Mechanical Engineering, 2015, 28(5):999-1011. [6] CANUDAS de WIT C, LINSCHINSKY P. Adaptive friction compensation with partially known dynamic friction model[J]. Int. J. Adaptive Control Signal Process 2007, 11:65-80. [7] ARMSTRONG B, DUPONT P. Friction modeling for control[C]//In American Control Conference 1993, 30:1905-1909. [8] CANUDAS de WIT C, OLSSON H, ASTROM K J. A new model for control of systems with friction[J]. IEEE Trans Automat Control 1995, 40(3):419-425. [9] LEE W, LEE C Y, JEONG Y H, et al. Distributed component friction model for precision control of a feed drive System[J]. IEEE/ASME Trans. Mechatron, 2015, 20(4):1966-74. [10] 吴跃飞,马大为,姚建勇,等. 基于修正LuGre模型的自适应鲁棒控制在机电伺服系统中的应用[J]. 机械工程学报, 2014, 50(22):207-212. WU Yuefei, MA Dawei, YAO Jianyong, et al. Application of adaptive robust control in mechatronic servo system based on modified LuGre model[J]. Journal of Mechanical Engineering, 2014, 50(22):207-212. [11] TAN Yaolong, CHANG Jie, TAN Hualin. Adaptive backstepping control and friction compensation for AC servo with inertia and load uncertainties[J]. IEEE Transactions on Industrial Electronics, 2003, 50(5):944-952. [12] 李毅波, 张猛, 黄明辉, 等. 模锻压机低速运行摩擦力的参数辨识与补偿控制[J]. 华南理工大学学报, 2013, 41(7):38-44. LI Yibo, ZHANG Meng, HUANG Minghui, et al. Parameter identification and compensation control of friction for die-forging press running at low speed[J]. Journal of South China University of Technology, 2013, 41(7):38-44. [13] 徐智浩,李胜,张瑞雷,等. 基于LuGre摩擦模型的机械臂模糊神经网络控制[J]. 控制与决策,2014,29(6):1097-1102. XU Zhihao, LI Sheng, ZHANG Ruilei, et al. Fuzzy-neural-network control for robot manipulators with LuGre friction model[J]. Control and Decision, 2014, 29(6):1097-1102. [14] ZHANG Yanming, YAN Peng, ZHANG Zhen. High precision tracking control of a servo gantry with dynamic friction compensation[J]. ISA Transactions, 2016, 62:349-356. [15] FREIDOVICH L, ROBERTSSON A, SHIRIAEV A, et al. Friction compensation based on LuGre model[C]//Proceedings of the 45th IEEE Conference on Decision and Control, IEEE, 2006, 3837-3842. [16] CANUDAS de WIT C, ASTROM K J, SORIN M. Slides of the workshop on control of systems with friction[C]//Proc. Mater. Workshop IEEE CDC, 1998. |