[1] HUANG Z Y, ZHONG J J, YANG L, et al. Research on the structure design and flow field of supersonic expander[C]//Proceedings of ASME Turbo Expo 2014:Turbine Technical Conference and Exposition, Düsseldorf, 2014. [2] NICKERSON G R, DUNN S S, MIGDAL D. Optimized supersonic exhaust nozzles for hypersonic propulsion[C]//Proceedings of 24TH Joint Propulsion Conference, Boston, 1988. [3] 文科,李旭昌,马岑睿,等.不同入口马赫数对超燃冲压发动机尾喷管的性能影响研究[J].火箭推进, 2011, 37(3):18-21. WEN Ke, LI Xuchang, MA Cenrui, et al. Influence of nozzle inlet Mach number on performance of scramjet nozzle[J]. Journal of rocket propulsion, 2011, 37(3):18-21. [4] DANIEL J D, LISA W G, FRANK W H, et al. Unsteady flow in a supersonic turbine with variable specific heats[J]. Journal of Propulsion and Power, 2002, 18(2):493-496. [5] YANG L, ZHONG J J, HAN J A. Numerical research on the flow field and performance of a ram-rotor and a scrampressor[C]//Proceedings of ASME Turbo Expo 2012:Turbine Technical Conference and Exposition, Copenhagen, 2012. [6] HAN J A, ZHONG J J, PAN Z S, et al. Effect of tip clearance size on the ram-rotor performance[C]//Proceedings of ASME Turbo Expo 2014:Turbine Technical Conference and Exposition, Düsseldorf, 2014. [7] 黄振宇,钟兢军,杨凌,等.间隙高度对超声速膨胀器流场及性能的影响[J].航空动力学报, 2015, 30(4):854-864. HUANG Zhenyu, ZHONG Jingjun, YANG Ling, et al. Influence of tip clearance heights on the flow field and performances of a supersonic expander[J]. Journal of aerospace power, 2015, 30(4):854-864. [8] 钟兢军,黄振宇,杨凌,等.超声速膨胀器设计及其内部流动研究[J]. 工程热物理学报, 2015, 36(1):60-66. ZHONG Jingjun, HUANG Zhenyu, YANG Ling, et al. Research on design and internal flow of supersonic expander[J]. Journal of Engineering Thermophysics, 2015, 36(1):60-66. [9] 钟兢军,黄振宇,杨凌,等.隔板截面造型对超声速膨胀器流场及性能的影响[J].航空动力学报, 2015, 30(2):446-454. ZHONG Jingjun, HUANG Zhenyu, YANG Ling, et al. Influence on flow field and performance of supersonic expander with different strake wall section shapes[J]. Journal of Aerospace Power, 2015, 30(2):446-454. [10] 钟兢军,黄振宇,杨凌,等.膨胀型面造型方式对超声速膨胀器流场及性能的影响[J].中国电机工程学报, 2014, 34(35):6329-6337. ZHONG Jingjun, HUANG Zhenyu, YANG Ling, et al. Influence of different expansion surface shapes on the flow field and performance of a supersonic expander[J]. Proceedings of the CSEE, 2014, 34(35):6329-6337. [11] 黄振宇,钟兢军,杨凌,等.端壁相对运动对超声速膨胀器间隙流动的影响[J].哈尔滨工程大学学报, 2016, 37(5):646-652. HUANG Zhenyu, ZHONG Jingjun, YANG Ling, et al. Influence of endwall relative motion on tip clearance flow in a supersonic expander[J]. Journal of Harbin Engineering University, 2016, 37(5):646-652. [12] 黄振宇,钟兢军,杨凌,等.顶部间隙对超声速膨胀器流动特性的影响[J]. 航空学报, 2016, 37(2):555-567. HUANG Zhenyu, ZHONG Jingjun, YANG Ling, et al. Influence of tip clearance on flow characteristics of a supersonic expander[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(2):555-567. [13] SCHNEIDER A, KOSCHEL W W. Detailed analysis of a mixed compression hypersonic intake[C/CD]//Proceedings of XIV ISABE, Florence, 1999. [14] DENTON J D. Loss mechanisms in turbomachines[J]. Journal of Turbomachinery, 1993, 115(4):621-656. |