渐开线花键副微动摩擦接触分析

doi:10.3901/JME.2018.07.123

机械工程学报 ›› 2018, Vol. 54 ›› Issue (7): 123-130.doi: 10.3901/JME.2018.07.123

渐开线花键副微动摩擦接触分析

谭援强^1,2, 蒋理宽¹, 姜胜强¹, 杨世平¹, 刘思思¹, 胡检发¹

1. 湘潭大学机械工程学院湘潭 411105;
2. 华侨大学制造工程研究院厦门 361021

收稿日期:2017-04-15 修回日期:2017-09-22 出版日期:2018-04-05 发布日期:2018-04-05
通讯作者: 姜胜强(通信作者),男,1986年出生,博士,副教授。主要研究方向为机械设计及理论。E-mail:jsqcx@xtu.edu.cn
作者简介:谭援强,男,1966年出生,博士,教授、博士研究生导师。主要研究方向为机械设计及理论。E-mail:tanyq@hqu.edu.cn;蒋理宽,男,1992年出生,硕士研究生。主要研究方向为机械设计及理论。E-mail:15573256561@163.com;杨世平,男,1978年出生,博士,副教授。主要研究方向为机械设计及理论。E-mail:ysp@xtu.edu.cn;刘思思,女,1986年出生,博士,副教授。主要研究方向为摩擦学。E-mail:liusisi@xtu.edu.cn
基金资助:
国家自然科学基金（51605409，51405413，51275435）、湖南省战略性新型产业专项（2014GK1029）和湖南省科技计划重大专项子课题（2014FJ1002）资助项目。

The Fretting Frictional Contact Analysis of Involute Spline Coupling

TAN Yuanqiang^1,2, JIANG Likuan¹, JIANG Shengqiang¹, YANG Shiping¹, LIU Sisi¹, HU Jianfa¹

1. School of Mechanical Engineering, Xiangtan University, Xiangtan 411105;
2. Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021

Received:2017-04-15 Revised:2017-09-22 Online:2018-04-05 Published:2018-04-05

摘要/Abstract

摘要： 基于有限元法，对渐开线花键副的微动摩擦接触行为进行了分析，得到了接触压力和相对滑移的分布规律，并对齿面摩擦接触状态和磨损进行了分析与预测，探讨摩擦因数对接触压力、相对滑移、摩擦接触状态和Ruiz参数的影响。结果表明：花键副齿面接触压力和相对滑移分布不均匀，摩擦因数越大，最大接触压力和最大相对滑移越小；摩擦因数对齿面摩擦接触状态影响较大；Ruiz参数随摩擦因数的增大而增大。

关键词: 花键副, 接触压力, 微动摩擦, 微动磨损, 相对滑移, 有限元法

Abstract: Based on the finite element method, the fretting frictional contact behaviors of involute spline coupling are investigated. The distribution law of contact pressure and relative slip are obtained, and the tooth surface frictional contact state and wear are analyzed and predicted. In addition, the influences of frictional coefficient on contact pressure, relative slip, frictional contact state and Ruiz parameter were discussed. The results show that the contact pressure and relative slip distributions are uneven, and the maximum contact pressure and maximum relative slip decreases when the frictional coefficient increases. The frictional coefficient has a significant effect on the tooth surface frictional contact state, and the Ruiz parameter increases with the increase of frictional coefficient.

Key words: contact pressure, finite element method, fretting friction, fretting wear, relative slip, spline coupling

中图分类号:

TH131

谭援强, 蒋理宽, 姜胜强, 杨世平, 刘思思, 胡检发. 渐开线花键副微动摩擦接触分析[J]. 机械工程学报, 2018, 54(7): 123-130.

TAN Yuanqiang, JIANG Likuan, JIANG Shengqiang, YANG Shiping, LIU Sisi, HU Jianfa. The Fretting Frictional Contact Analysis of Involute Spline Coupling[J]. Journal of Mechanical Engineering, 2018, 54(7): 123-130.

参考文献

[1] 刘志奇,宋建丽,李永堂,等. 渐开线花键冷滚压精密成形工艺分析及试验研究[J]. 机械工程学报, 2011, 47(14):32-38. LIU Zhiqi, SONG Jianli, LI Yongtang, et al. Analysis and experimental study on the precision cold rolling process of involute spline[J]. Journal of Mechanical Engineering, 2011, 47(14):32-38.
[2] CUFFARO V, CURA F, MURA A. Test rig for spline couplings working in misaligned conditions[J]. Journal of Tribology, 2014, 136(1):011104.
[3] CURA F, MURA A, GRAVINA M. Load distribution in spline coupling teeth with parallel offset misalignment[J]. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science,2013, 227(10):2195-2205.
[4] CUFFARO V, CURA F, MURA A. Analysis of the pressure distribution in spline couplings[J]. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 2012, 226(12):2852-2859.
[5] CURA F, MURA A. Experimental and theoretical investigation about reaction moments in misaligned splined couplings[J]. Mechanical Systems and Signal Processing, 2014, 45(2):504-512.
[6] CURA F, MURA A. Experimental procedure for the evaluation of tooth stiffness in spline coupling including angular misalignment[J]. Mechanical Systems and Signal Processing, 2013, 40(2):545-555.
[7] MEDINA S, OLVER A. Regimes of contact in spline couplings[J]. Journal of Tribology, 2002, 124(2):351-357.
[8] MEDINA S, OLVER A. An analysis of misaligned spline couplings[J]. Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology, 2002, 216(5):269-278.
[9] LEEN S, HYDE T, WILLIAM E, et al. Development of a representative test specimen for frictional contact in spline joint couplings[J]. The Journal of Strain Analysis for Engineering Design, 2000, 35(6):521-544.
[10] LEEN S, RICHARDSO I, MCCOLL I, et al. Macroscopic fretting variables in a splined coupling under combined torque and axial load[J]. The Journal of Strain Analysis for Engineering Design, 2001, 36(5):481-497.
[11] MCCOLL I, DING J, LEEN S. Finite element simulation and experimental validation of fretting wear[J]. Wear, 2004, 256(11):1114-1127.
[12] DING J, MCCOLL I, LEEN S. The application of fretting wear modelling to a spline coupling[J]. Wear, 2007, 262(9):1205-1216.
[13] HONG J, TALBOT D, KAHRAMAN A. Load distribution analysis of clearance-fit spline joints using finite elements[J]. Mechanism and Machine Theory, 2014, 74:42-57
[14] HONG J, TALBOT D, KAHRAMAN A. A semi-analytical load distribution model for side-fit involute splines[J]. Mechanism and Machine Theory, 2014, 76:39-55.
[15] 胡正根,朱如鹏,靳广虎,等. 航空渐开线花键副微动摩擦接触参数分析[J]. 中南大学学报, 2013, 44(5):1822-1828. HU Zhenggen, ZHU Rupeng, JIN Guanghu, et al. Analysis of fretting frictional contact parameters of aviation involute spline couplings[J]. Journal of Central South University, 2013, 44(5):1822-1828.
[16] 陈元,朱如鹏,靳广虎. 航空渐开线花键副齿面摩擦功分析[J]. 机械传动, 2015, 39(8):119-121. CHEN Yuan, ZHU Rupeng, JIN Guanghu, et al. Analysis of tooth surface friction work of aviation involute spline pair[J]. Journal of Mechanical Transmission, 2015, 39(8):119-121.
[17] 胡正根,朱如鹏,靳广虎,等. 齿向分段抛物线修形对渐开线花键副微动磨损参数的影响[J]. 航空动力学报, 2013(7):1644-1649. HU Zhenggen, ZHU Rupeng, JIN Guanghu, et al. Effect of axial piecewise parabolic modification on fretting wear parameters of involute spline couplings[J]. Journal of Aerospace Power, 2013(7):1644-1649.
[18] 赵广,刘占生,叶建槐,等. 转子-不对中花键联轴器系统动力学特性研究[J]. 振动与冲击, 2009, 28(3):78-82. ZHAO Guang, LIU Zhansheng, YE Jianwei, et al. Study on dynamic characteristics of rotor system connected by misalignment gear coupling[J]. Journal of Vibration and Shock, 2009, 28(3):78-82.
[19] 韩晓娟. 挠性花键联接的强度计算[J]. 燕山大学学报, 2001, 25(1):45-46. HAN Xiaojuan. Strength calculating methods of flexible splines[J]. Jorunal of Yanshan University, 2001, 25(1):45-46.
[20] 王庆国,陈大兵,魏静,等. 基于有限元法的渐开线花键联接接触分析[J]. 机械传动, 2014(1):134-137. WANG Qingguo, CHEN Dabing, WEI Jing, et al. Contact analysis of involute spline joint based on FEM[J]. Journal of Mechanical Transmission, 2014(1):134-137.
[21] 宫昱滨,鲁连涛,张远彬,等. 空心轴过盈配合结构循环微动磨损的仿真研究[J]. 机械工程学报,2017,53(6):123-130. GONG Yubin, LU Liantao, ZHANG Yuanbin, et al. Simulation research on the fretting wear of press-fitted hollow axle[J]. Journal of Mechanical Engineering, 2017, 53(6):123-130.
[22] BARROT A, PAREDE M, SARTOR M. Determining both radial pressure distribution and torsional stiffness of involute spline couplings[J]. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 2006, 220(12):1727-1738.
[23] MINDLIN D. Compliance of elastic bodies in contact[J]. Journal of Applied Mechanics, 1949, 71:259-268.
[24] RUIZ C, BODDINGTON P, CHEN K. An investigation of fatigue and fretting in a dovetail joint[J]. Experimental Mechanics, 1984, 24(3):208-217.
[25] 张俊,卞世元,鲁庆,等. 准静态工况下渐开线直齿轮齿面磨损建模与分析[J]. 机械工程学报, 2017, 53(5):136-145. ZHANG Jun, BIAN Shiyuan, LU Qing, et al. Quasi-static-model-based wear analysis of spur gears[J]. Journal of Mechanical Engineering, 2017, 53(5):136-145.

渐开线花键副微动摩擦接触分析

The Fretting Frictional Contact Analysis of Involute Spline Coupling

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张俊, 葛世荣, 王大刚, 张德坤. 基于微动磨损预测矿井提升钢丝绳安全系数[J]. 机械工程学报, 2019, 55(7): 110-118.
[2]	张军, 刘佳欢, 王雪萍, 马贺. 基于有限元摩擦功计算的钢轨磨耗预测方法[J]. 机械工程学报, 2019, 55(14): 104-111.
[3]	张满,冉军德,田芝华,费夕刚,邹灿,胡飞. 带电雾凇覆冰后分裂导线电场分布模型分析[J]. 电气工程学报, 2018, 13(8): 43-48.
[4]	寇峻瑜, 王衡禹, 赵鑫, 赵国堂, 金学松. 钢轨脱碳层对轮轨瞬态滚动接触行为的影响分析[J]. 机械工程学报, 2018, 54(4): 101-108.
[5]	张合吉, 何泽寒, 刘建桥, 吴磊, 王衡禹, 温泽峰. 地铁异常磨耗车轮与辙叉接触分析[J]. 机械工程学报, 2018, 54(4): 117-123.
[6]	潘帅航, 尹念, 张执南. 微动界面连续干摩擦行为的分子动力学模拟[J]. 机械工程学报, 2018, 54(3): 82-87.
[7]	吴家腾, 杨宇, 程军圣. 基于解析有限元的齿根裂纹时变啮合刚度计算方法[J]. 机械工程学报, 2018, 54(23): 56-62.
[8]	贵新成, 李立顺, 李红勋, 詹隽青, 薛兴东. 高重合度摆线内齿轮副时变啮合刚度计算与齿间载荷分配研究[J]. 机械工程学报, 2018, 54(21): 101-112.
[9]	张越, 何晓聪, 李智, 张义和. 铝合金压印接头微动疲劳机理研究[J]. 机械工程学报, 2018, 54(19): 190-196.
[10]	杜永强, 刘建华, 刘学通, 蔡振兵, 彭金方, 朱旻昊. 偏心载荷作用下螺栓连接结构的松动行为研究[J]. 机械工程学报, 2018, 54(14): 74-81.
[11]	葛月, 牛军川, 刘知辉. 多种激励形式下任意角度耦合板振动传递特性研究^*[J]. 机械工程学报, 2017, 53(7): 94-103.
[12]	宫昱滨, 鲁连涛, 张远彬, 张继旺, 曾东方. 空心轴过盈配合结构循环微动磨损的仿真研究^*[J]. 机械工程学报, 2017, 53(6): 123-130.
[13]	冯海全, 仇洪然, 刘佳, 王永刚. 永久性腔静脉滤器的生物力学和血流动力学性能分析^*[J]. 机械工程学报, 2017, 53(6): 187-194.
[14]	刘超, 赵鑫, 赵小罡, 寇峻瑜, 温泽峰. 单侧钢轨波磨对两侧轮轨瞬态响应的影响分析[J]. 机械工程学报, 2017, 53(22): 117-124.
[15]	吴涛, 吴兵, 温泽峰, 金学松. 基于不同微观固体接触模型的轮轨表面变形特性分析[J]. 机械工程学报, 2017, 53(22): 134-142.