• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2018, Vol. 54 ›› Issue (4): 57-63.doi: 10.3901/JME.2018.04.057

• 钢轨波磨机理与防治 • 上一篇    下一篇

车辆轨道关键参数对高速铁路钢轨波磨发展的影响

蒋忠辉1, 赵国堂2, 张合吉1, 吴磊3, 温泽峰1, 王衡禹1   

  1. 1. 西南交通大学牵引动力国家重点实验室 成都 610031;
    2. 中国铁路总公司 北京 100844;
    3. 西南交通大学峨眉校区机械工程系 峨眉 614202
  • 收稿日期:2017-04-30 修回日期:2017-07-17 出版日期:2018-02-20 发布日期:2018-02-20
  • 通讯作者: 王衡禹(通信作者),男,1979年出生,博士,副研究员,硕士研究生导师。主要研究方向为轮轨摩擦磨损机理、钢轨打磨理论及应用以及轮轨养护维修的理论及应用。E-mail:hywang@home.swjtu.edu.cn
  • 作者简介:蒋忠辉,男,1991年出生。主要研究方向为车辆/轨道耦合动力学、高速铁路轮轨关系以及高速铁路钢轨波磨。E-mail:zhonghui.jiang@foxmail.com
  • 基金资助:
    国家自然科学基金(51605395)、中央高校基本科研业务费专项资金(2682016CX133)和中国铁路总公司(2015G008-B)资助项目

Effects of Vehicle and Track Key Parameters on the Rail Corrugation of High-speed Railways

JIANG Zhonghui1, ZHAO Guotang2, ZHANG Heji1, WU Lei3, WEN Zefeng1, WANG Hengyu1   

  1. 1. State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu 610031;
    2. China Railway Corporation, Beijing 100844;
    3. Department of Mechanical Engineering, Southwest Jiaotong University, Emei 614202
  • Received:2017-04-30 Revised:2017-07-17 Online:2018-02-20 Published:2018-02-20

摘要: 基于轮轨垂向动力学、轮轨滚动接触理论以及磨耗理论建立高速铁路无砟轨道钢轨波磨发展的理论计算模型,并发展出相应的数值仿真方法。其中轮轨垂向动力学模型包含高速车辆和高速铁路无砟轨道模型;采用Hertz接触理论和Carter二维轮轨接触理论计算轮轨切向力;利用摩擦功磨耗模型计算钢轨表面的磨耗。利用数值仿真再现了高速铁路钢轨波磨的演化过程,以此来研究车辆一系悬挂刚度以及悬挂阻尼,轨道扣件刚度、扣件阻尼以及钢轨硬度对高速铁路钢轨波磨发展的影响规律。结果表明:文中模拟所得的钢轨波磨波长特征与高速铁路上的波磨调查结果相符;较小的车辆一系悬挂刚度,适当的一系悬挂阻尼和扣件刚度,以及较大的扣件阻尼和钢轨硬度有利于抑制高速铁路钢轨波磨的发展。

关键词: 动力学, 钢轨波磨, 高速铁路, 轮轨接触理论, 无砟轨道

Abstract: Based on wheel-rail vertical dynamics, wheel-rail rolling contact theory and abrasion theory of materials, a calculation model of high speed railway rail corrugation is established and the corresponding numerical method is developed. The wheel-rail vertical dynamic model is established using the parameters of a corrugated ballastless high-speed railway. Hertz contact theory and Carter two-dimensional theoretical model of wheel-rail contact are used to calculate the wheel-rail contact force in normal and tangential directions. The wear of rail surface is determined using friction work. The development of the high-speed rail corrugation is reproduced numerically. The influence of some key parameters of high-speed vehicle and track, such as vehicle primary vertical suspension stiffness and damping, rail fastener stiffness, fastener damping and rail hardness, on the rail corrugation of high-speed railway. The results indicate that some range of the key parameters of high-speed vehicle and track will help to alleviate the development of corrugation on the high-speed railways.

Key words: ballastless track, dynamics, high-speed railways, rail corrugation, wheel-rail contact theory

中图分类号: