强化感应加热辅助磨削Inconel718的残余应力主动调控

doi:10.3901/JME.2018.03.216

机械工程学报 ›› 2018, Vol. 54 ›› Issue (3): 216-226.doi: 10.3901/JME.2018.03.216

强化感应加热辅助磨削Inconel718的残余应力主动调控

李峰¹, 李学崑², 融亦鸣³

1. 太原理工大学机械工程学院太原 030024;
2. 清华大学机械工程系北京 100084;
3. 南方科技大学机械与能源工程系深圳 518055

收稿日期:2017-03-01 修回日期:2017-10-12 出版日期:2018-02-05 发布日期:2018-02-05
通讯作者: 李峰(通信作者),男,1984年出生,博士,讲师。主要研究方向为感应加热技术、精密磨削加工。E-mail:lifeng02@tyut.edu.cn
作者简介:李学崑,男,1981年出生,博士,助理研究员。主要研究方向为精密制造、磨料磨具精密加工。E-mail:xli@mail.tsinghua.edu.cn;融亦鸣,男,1958年出生,博士,教授,博士研究生导师。主要研究方向为精密加工技术、金属材料加工中的建模仿真及优化和制造系统生产规划与工装技术。E-mail:yrong@mail.tsinghua.edu.cn
基金资助:
国家自然科学基金（U1430116）、太原理工大学校基金（2016QN08）和太原理工大学引进人才（tyut-rc201554a）资助项目。

Active Control of the Residual stress in Inconel718 Grinding Assisted by the Strengthen Induction Heating

LI Feng¹, LI Xuekun², RONG Yiming³

1. College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024;
2. Department of Mechanical Engineering, Tsinghua University, Beijing 100084;
3. Department of Mechanical Energy Engineering, Southern University of Science and Technology, Shenzhen 518055

Received:2017-03-01 Revised:2017-10-12 Online:2018-02-05 Published:2018-02-05

摘要/Abstract

摘要： 镍基高温合金Inconel718具有良好的高温强度和高耐蚀性能，广泛应用于制造航空工业特别是燃气涡轮发动机的高温构件。然而最终的成形磨削工艺常常在零件表面形成较大的残余拉应力，这对其疲劳强度和寿命等服役性能极为不利。研究和开发了一种基于磨削区的热温度梯度调节原理的复合磨削工艺，以主动调节Inconel718零件表面残余应力分布。在磨削工艺中利用控制良好的感应加热装置将热源嵌入到工件亚表层，通过对所需的温度梯度分布的主动控制实现对残余应力的调节。结果表明，通过合理调节感应加热和磨削工艺参数，可以获得较小的表面残余拉应力甚至压应力分布。本研究能够减少当前生产中为获得表面残余压应力而额外采取的喷丸等后续工艺，实现磨削残余应力的在线主动控制，且该技术也可以扩展推广应用到其他材料以及其他加工工艺中，如切削、铣削等。

关键词: 感应加热, 聚能器（MPB-MFC）, 磨削残余应力, 镍基高温合金, 主动控制

Abstract: Nickel-based superalloy Inconel 718 possesses high strength and corrosion resistance, which is widely applied in aviation industry, especially the high temperature components of gas turbine engines. However, the final forming grinding process often forms a large residual tensile stress on the surface of the parts, which is detrimental to the fatigue strength and life of the parts. A combined grinding process based on the principle of the thermal gradient adjustment in grinding zone is studied, which could adjust the residual stress distribution on the surface of Inconel718 parts actively. In the combined grinding process, the heat source is embedded into the sub-surface of the workpiece by induction heating equipments well controlled, which can adjust the residual stress by the active control of the temperature gradient. The results show that the smaller surface residual tensile stress and even compressive stress distribution can be obtained by reasonably adjusting the parameters of the induction heating and grinding process. This study can reduce the extra shot peening process during the current production in order to obtain the compressive residual stress on the surface, and realize the on-line active control of the grinding residual stress. Furthermore, the combined grinding technology can be extended to the other materials and machining processes, such as cutting, milling, etc.

Key words: active control, grinding residual stress, induction heating, metal powder bonded magnetic flux concentrator (MPB-MFC), nickel-based superalloy

中图分类号:

TG580
TG162

李峰, 李学崑, 融亦鸣. 强化感应加热辅助磨削Inconel718的残余应力主动调控[J]. 机械工程学报, 2018, 54(3): 216-226.

LI Feng, LI Xuekun, RONG Yiming. Active Control of the Residual stress in Inconel718 Grinding Assisted by the Strengthen Induction Heating[J]. Journal of Mechanical Engineering, 2018, 54(3): 216-226.

参考文献

[1] 郭建亭. 高温合金材料与工程应用[M]. 北京:科学出版社,2010. GUO Jianting. Materials science and engineering for superalloys[M]. Beijing:Science Press,2010.
[2] 庄景云,杜金辉,邓群,等. 变形高温合金GH4169[M]. 北京:冶金工业出版社,2006. ZHUANG Jingyun,DU Jinhui,DENG Qun,et al. Deform superalloy GH4169[M]. Beijing:Metallurical Industrial Press,2006.
[3] 任敬心,华定安. 磨削原理[M]. 北京:电子工业出版社,2011. REN Jingxin,HUA Dingan. Grinding principle[M]. Beijing:Electronic Industrial Press,2011.
[4] 米谷茂. 残余应力的产生和对策[M]. 北京:机械工业出版社,1983. MI Gumao. Residual stress and its countermeasures[M]. Beijing:Machinery Industrial Press,1983.
[5] JAMES M N. Residual stress influences on structural reliability[J]. Engineering Failure Analysis,2011,18:1909-1920.
[6] JAMES M N,HUGHES D J,CHEN Z,et al. Residual stresses and fatigue performance[J]. Engineering Failure Analysis,2007,14:384-395.
[7] 陈仁海,郑焕文,张春元. 缓进给强力磨削表面残余应力的试验研究[J]. 东北工学院学报,1983,36(3):88-96. CHEN Renhai,ZHENG Huanwen,ZHANG Chunyuan. An experimental research on surface residual stress due to creep-feed grinding[J]. Journal of Northeast Institute of Technology,1983,36(3):88-96.
[8] 胡忠辉,袁哲俊. 磨削残余应力产生机理的研究[J]. 哈尔滨工业大学学报,1989,6(3):51-60. HU Zhonghui,YUAN Zhejun. Research on the forming mechanism of residual stresses produced in grinding[J]. Journal of Harbin Institute of Technology,1989,6(3):51-60.
[9] 王西彬. 结构陶瓷磨削及变质层的研究[D]. 西安:西安交通大学,1994. WANG Xibin. Study on grinding and modification of the structural ceramics[D]. Xi'an:Xi'an Jiaotong University,1994.
[10] 王西彬,李相真. 结构陶瓷磨削表面的残余应力[J]. 金刚石与磨料磨具工程,1997,6(102):18-22. WANG Xibin,LI Xiangzhen. An investigation on the surface residual stress of structure ceramics after grinding[J]. Diamond and Abrasives Engineering,1997,6(102):18-22.
[11] 田欣利,徐燕申,彭泽民,等. 结构陶瓷磨削表面残余应力的产生机理[J]. 兵工学报,1998,19(4):361-364. TIAN Xinli,XU Yanshen,PENG Zemin,et al. Mechanism of formation of surface residual stresses on structural ceramics upon grinding[J]. Acta Armamentarii,1998,19(4):361-364.
[12] 田欣利,徐燕申,林彬. 陶瓷磨削表面残余应力的理论模型[J]. 中国机械工程,1999,10(7):724-726. TIAN Xinli,XU Yanshen,LIN Bin. Theoretical model of residual stress on ground ceramic surface[J]. China Mechanical Engineering,1999,10(7):724-726.
[13] 田欣利,于爱兵,林彬. 陶瓷磨削温度对表面残余应力的影响[J]. 中国机械工程,2002,13(18):1600-1601. TIAN Xinli,YU Aibin,LIN Bin. The effect of the grinding temperature on ceramic surface residual stresses[J]. China Mechanical Engineering,2002,13(18):1600-1601.
[14] 田欣利,林彬,于爱兵. 陶瓷磨削表面残余应力对零件强度的影响研究[J]. 机械科学与技术,2002,21(1):114-115. TIAN Xinli,LIN Bing,YU Aibing. On the effect of surface residual stresses of ceramic grinding on fracture strength[J]. Mechanical Science and Technology,2002,21(1):114-115.
[15] 康仁科,任敬心. 改善钦合金磨削残余应力的有效途径[J]. 航空工艺技术,1990,03:7-11. KANG Renke,REN Jingxin. The effective way of reducing the grinding residual stress of Ti-alloy[J]. Aeronautical Manufacturing Technology,1990,03:7-11.
[16] 任敬心,孟庆国,陈景蕙. GH33A高温合金的磨削温度与残余应力[J]. 航空工艺技术,1995(1):3-7. REN Jingxin,MEN Qingguo,CHEN Jinhui. Grinding temperature and residual stress of grinding superalloy GH33A[J]. Aeronautical Manufacturing Technology,1995(1):3-7.
[17] 任敬心,杨茂奎,李雅卿,等. 镍基高温合金的磨削特征[J]. 航空学报,1997,18(6):755-758. REN Jingxin,YANG Maokui,LI Yaqin,et al. Grinding characteristic of nickel-based superalloy[J]. Acta Aeronautica et Astronautica Sinica,1997,18(6):755-758.
[18] 黄新春,张定华,姚倡锋,等. 超高强度钢AerMet100磨削烧伤研究[J]. 机械工程学报,2015,51(9):184-190. HUANG Xinchun,ZHANG Dinghua,YAO Changfeng,et al. Research on the grinding burn of the ultrahigh strength steel AerMet100[J]. Journal of Mechanical Engineering,2015,51(9):184-190.
[19] 李晓天,陈明,孙方宏,等. DZ4材料的磨削烧伤机理[J]. 航空制造技术,2001(6):22-24. LI Xiaotian,CHEN Ming,SUN Fanghong,et al. Burn mechanism of superalloy DZ4 workpiece in grinding[J]. Aeronautical Manufacturing Technology,2001(6):22-24.
[20] BRINKSMEIER E,AURICH J C,GOVEKAR E,et al. Advances in modeling and simulation of grinding processes[J]. Annals of the CIPP,2006,2(55):667-696.
[21] BALART M J,BOUZINA A,EDWARDS L,et al. The onset of tensile residual stresses in grinding of hardened steels[J]. Materials Science and Engineering,2004,367(1-2):132-142.
[22] MOFID M,ZHANG L. Applied mechanics in grinding. Part 7:Residual stress induced by the all coupling of mechanical deformation,thermal deformation and phase transformation[J]. International Journal of Machine Tools & Manufacture,1999,39:1285-1298.
[23] MALKIN S,GUO,C S. Grinding technology[M]. 2nd ed. New York:Industrial Press,2008.
[24] 徐西鹏,黄辉,徐鸿钧. 断续CBN砂轮缓进给磨削K417航空叶片材料的研究[J]. 航空学报,1997,18(3):316-323. XU Xipeng,HUANG Hui,XU Hongjun. Study on creep feed grinding of superalloy K417 for vanes used in aeronautical industry by utilizing intermittent CBN wheel[J]. Acta Aeronautica et Astronautica Sinica,1997,18(3):316-323.
[25] AKOYAMA T I,INASAKI I. Suppression of temperature rise in creep feed grinding[J]. Proc. 5th ICPE,Tokyo,1984:46.
[26] PEREZ J,HOYAS S,SKURATOV D L,et al. Heat transfer analysis of intermittent grinding processes[J]. International Journal of Heat and Mass Transfer,2008,55(15-16):4132-4138.
[27] 孙方宏,陈明,徐鸿钧,等. 磨削弧区采用径向射流冲击强化换热的试验研究[J]. 工具技术,1999,33(10):3-6. SUN Fanghong,CHEN Ming,XU Hongjun,et al. Experiment research on enhancing heat transfer of grinding contact zone by radial jet impinging[J]. Tool Engineering,1999,33(10):3-6.
[28] WANG S P,LI Y J,YAO M,et al. Compressive residual stress introduced by shot peening[J]. Journal of Materials Processing Technology,1998,73:64-73.
[29] DALAEI K,KARLSSON B,SVENSSON L E. Stability of shot peening induced residual stresses and their influence on fatigue lifetime[J]. Materials Science and Engineering A,2011,528:1008-1015.
[30] LI F,LI X K,ZHU T X,et al. Numerical simulation of the moving induction heating process with magnetic flux concentrator[J]. Advances in Mechanical Engineering,2013:1-9.
[31] 李峰,李学崑,朱天行,等. 基于响应曲面法的强化感应加热数值仿真[J]. 清华大学学报,2013(4):469-475. LI Feng,LI Xuekun,ZHU Tianxing,et al. Numerical simulations of strengthen induction heating with response surface methodology[J]. Journal of Tsinghua University,2013(4):469-475.
[32] LI F,LI X K,ZHU T X,et al. Modeling and simulation of induction heating with magnetic flux concentrator[J]. Applied Mechanics and Materials,2013,268-270:983-991.
[33] RUDNEV V,LOVELESS D,COOK R,et al. Handbook of induction heating[M]. Michigan,USA:CRC Press,2002.
[34] DENIS S,SJOSTROM S,SIMON A. Coupled temperature,stress,phase transformation calculation model numerical illustration of the internal stresses evolution during cooling of a eutectoid carbon steel cylinder[J]. Metallurgical Transactions A,1987,18:1203-1212.
[35] 李维特,黄保海,毕仲波. 热应力理论分析及应用[M]. 北京:中国电力出版社,2004. LI Weite,HUANG Baohai,BI Zhongbo. Theoretical analysis and application of thermal stress[M]. Beijing:China Electric Power Press,2004.
[36] 沈庆通,张宗杰. 强力感应器与导磁体的发展[J]. 金属热处理,2001,26(8):47-49. SHENG Qingtong,ZHANG Zongjie. Development of power inductor and magnetic flux field concentrators[J]. Metal Heat Treatment,2001,26(8):47-49.
[37] RUFFIN R S,RUFFIN R T,NEMKOV V S,et al. Advanced design of induction processes and work coils for heat treating and assembly in automotive industry[C]// Proceedings of the 1999 SAE Southern Automotive Manufacturing Conference. Alabama,USA:SAE,1999:1-9.
[38] FLUX 10 User’s guide,volume 2:Physical description[Z]. France:Cedrat Inc.,2009.
[39] 周俊. 镍基高温合金GH4169高速切削相关技术与机理的研究[D]. 哈尔滨:哈尔滨工业大学,2012. ZHOU Jun. Research on correlation technique and mechanism of high-speed cutting Ni-based superalloy GH4169[D]. Harbin:Harbin Institute of Technology,2012.

强化感应加热辅助磨削Inconel718的残余应力主动调控

Active Control of the Residual stress in Inconel718 Grinding Assisted by the Strengthen Induction Heating

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	季元进, 李锐, 任利惠. 基于轮毂电机和转速差反馈的独立车轮轮对主动导向控制的影响因素[J]. 机械工程学报, 2018, 54(8): 48-56.
[2]	唐进元, 郑金超, 廖东日, 邵文. 12CrNi4A材料轴向超声干磨削残余应力计算及试验研究[J]. 机械工程学报, 2018, 54(17): 246-254.
[3]	任海水, 熊华平, 吴欣, 陈波, 程耀永, 陈冰清. 钛铝系合金与镍基高温合金异种连接技术研究进展^*[J]. 机械工程学报, 2017, 53(4): 1-10.
[4]	章仁燮, 熊璐, 余卓平. 智能汽车转向轮转角主动控制[J]. 机械工程学报, 2017, 53(14): 106-113.
[5]	孙建亮, 邱丑武, 毕雪峰, 王实. 感应加热与传统加热模式大型筒节加热效果研究[J]. 机械工程学报, 2017, 53(10): 25-33.
[6]	彭志召, 张进秋, 岳杰, 张磊, 黄大山. 具有并联常通孔的磁流变阻尼器设计与分析[J]. 机械工程学报, 2015, 51(8): 172-177.
[7]	杨盛志, 王晓彤, 李艳, 蔡杰, 侯秀丽, 关庆丰. 强流脉冲电子束作用下镍基高温合金GH4169的微观结构及腐蚀性能[J]. 机械工程学报, 2015, 51(12): 50-56.
[8]	刘战强;吕绍瑜. 镍基粉末高温合金切削加工表面白层形成热-力耦合作用机理[J]. , 2014, 50(17): 186-193.
[9]	黄佳;杨晓光;石多奇;王井科;胡晓安. 基于临界距离-临界平面方法预测DZ125缺口低循环疲劳寿命[J]. , 2013, 49(22): 109-115.
[10]	王有懿;赵阳;马文来. 耦合梁中高频抖动的行波分析与主动控制[J]. , 2013, 49(22): 185-191.
[11]	丁庆中;李以农;张锋;王雷. 基于自适应滤波算法的齿轮传动系统振动主动控制[J]. , 2013, 49(15): 74-81.
[12]	李生权;季宏丽;裘进浩. 基于压电智能结构状态估计误差补偿的自抗扰振动控制[J]. , 2012, 48(5): 34-42.
[13]	彭锐涛;廖妙;谭援强;刘雄伟. 预应力切削镍基高温合金的试验研究[J]. , 2012, 48(19): 186-191.
[14]	宫岛;周劲松;孙文静;王瑞卿. 高速列车弹性车体垂向振动控制[J]. , 2011, 47(20): 159-164.
[15]	王永富;王殿辉;柴天佑. 摩擦诱发极限环的分析与自适应主动控制[J]. , 2011, 47(11): 44-51.