[1] HOHN B R,MICHAELIS K,OTTO H P. Minimised gear lubrication by a minimum oil/air flow rate[J]. Wear,2009,266(3-4):461-467. [2] DUDOROV E A,RUZANOV A I,ZHIRKIN Y V. Introducing an oil-air lubrication system at a continuous-casting machine[J]. Steel in Translation,2009,39(4):351-354. [3] JENG Y R,GAO C C. Investigation of the ball-bearing temperature rise under an oil-air lubrication system[J]. Proceedings of the Institution of Mechanical Engineers,Part J:Journal of Engineering Tribology,2001,215(2):139-148. [4] WU C H,KUNG Y T. A parametric study on oil/air lubrication of a high-speed spindle[J]. Precision Engineering,2005,29(2):162-167. [5] JIANG S,MAO H. Investigation of the high speed rolling bearing temperature rise with oil-air lubrication[J]. Journal of Tribology,2011,133(2):021101. [6] MOON J H,LEE H D,KIM S I. Lubrication characteristics analysis of an air-oil lubrication system using an experimental design method[J]. International Journal of Precision Engineering and Manufacturing,2013,14(2):289-297. [7] 王少鹏. 微量供油条件下润滑油膜特性实验研究[D]. 青岛:青岛理工大学,2014.WANG Shaopeng. Experimental studies on the lubrication films with minimal quantity oil feeding[D]. Qingdao:Qingdao Technological University,2014. [8] WIJNANT Y H. Contact dynamics in the field of elastohydrodynamic lubrication[D]. Enschede:University of Twente,1998. [9] DAMIENS B,VENNER C H,CANN P M E,et al. Starved lubrication of elliptical EHD contacts[J]. Journal of Tribology,2004,126(1):105-111. [10] 谭洪恩,杨沛然,尹昌磊. 特殊供油条件下点接触弹流润滑乏油分析[J]. 摩擦学报,2007,27(4):357-361.TAN Hongen,YANG Peiran,YIN Changlei. Analysis of the oil starvation in EHL point contacts under a special oil-supply condition[J]. Tribology,2007,27(4):357-361. [11] YIN Changlei,YANG Peiran,TAN Hongen,et al. Thermal elastohydrodynamic lubrication of starved elliptical contacts[J]. Tribology International,2009,42(6):964-974. [12] CHEVALIER F,LUBRECHT A A,CANN P M E,et al. Film thickness in starved EHL point contacts[J]. Journal of Tribology,1998,120(1):126-133. |