• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2018, Vol. 54 ›› Issue (1): 171-177.doi: 10.3901/JME.2018.01.171

• 摩擦学 • 上一篇    下一篇

弹性磨具高效磨抛M300钢曲面的接触特征研究

吴晓君, 陈竹, 周天择, 马长捷, 舒骁, 董建园   

  1. 西安建筑科技大学机电工程学院 西安 710055
  • 收稿日期:2017-02-11 修回日期:2017-06-19 出版日期:2018-01-05 发布日期:2018-01-05
  • 通讯作者: 吴晓君(通信作者),女,1964年出生,博士,教授。主要研究方向为机械电子、先进制造系统。E-mail:wuxiaojun@xauat.edu.cn
  • 作者简介:陈竹,女,1993年出生,研究生。主要研究方向为先进制造系统研究。E-mail:chenzhu11682@163.com;周天择,男,1992年出生,研究生。主要研究方向为数控加工技术及装备。E-mail:copyztz@sina.com;马长捷,男,1986年出生,研究生。主要研究方向为数字化开发与制造。E-mail:mcj625@sohu.com;舒晓,男,1990年出生,研究生。主要研究方向先进制造技术与制造自动化。E-mail:cangzhiyin1@126.com;董建园,男,1971年出生,博士,副教授。主要研究方向为机电运动控制。E-mail:har@yeah.net
  • 基金资助:
    国家自然科学基金资助项目(51375361,51475353)。

Research on Processing Efficiency and Contact Characteristics of M300 Steel Surface Grinding with Elastic Abrasives

WU Xiaojun, CHEN Zhu, ZHOU Tianze, MA Changjie, SHU Xiao, DONG Jianyuan   

  1. School of Mechanical and Electrical Engineering, Xi'an University of Architecture and Technology, Xi'an 710055
  • Received:2017-02-11 Revised:2017-06-19 Online:2018-01-05 Published:2018-01-05

摘要: 硬质合金曲面磨抛过程中,影响因素较多且存在耦合,加工效率低,废品率高。为提高相对滞后的曲面光整技术,从理论上得到磨抛效率与接触特征的关系,以M300钢为研究对象,通过对弹性磨具的微观接触分析,建立残留峰数学模型,得到残留峰移除率与影响磨抛精度的主要因素的精确表达式,确定了各个因素对磨抛效果的影响程度和最佳参数组合,并验证了该参数组合的正确性,为硬质材料曲面超精磨抛提供了理论指导。

关键词: 残留峰, 弹性磨具, 接触特征, 磨抛效率, 田口法

Abstract: Due to the complex influence factors in the processing of cemented carbide surface, followed by low efficiency and a high rejection rate. To improve the technology of finishing the curve surface, and obtain the relationship between processing efficiency and contact characteristics in theory, it takes steel M300 as the study objective and establishes the model of residual peak by analyzing the micro contact characteristics of the elastic abrasives. Through analysis of model, the functional relationship between the residual peak removal area and the main parameters affecting the grinding accuracy is derived. Finally, the influence degree of each parameter on the polishing effect and the best parameter combination is gotten and verified by a set of experiments and provide references to hard precise surface polishing.

Key words: contact characteristics, elastic abrasive, grinding efficiency, Taguchi method, the residual peak

中图分类号: