硬质合金立铣刀螺旋槽磨削表面粗糙度模型研究

doi:10.3901/JME.2017.17.185

机械工程学报 ›› 2017, Vol. 53 ›› Issue (17): 185-192.doi: 10.3901/JME.2017.17.185

硬质合金立铣刀螺旋槽磨削表面粗糙度模型研究

宋铁军, 周志雄, 李伟, 黄向明, 陈启迪

湖南大学机械与运载工程学院长沙 410082

收稿日期:2017-02-11 修回日期:2017-06-06 发布日期:2017-09-05
通讯作者: 宋铁军(通信作者),男,1985年出生,博士研究生。主要研究方向为复杂刀具的设计与制造。E-mail:tie8yu@163.com
作者简介:周志雄,男,1953年出生,博士,教授,博士研究生导师。主要研究方向为复杂刀具的设计与制造、数控机床装备、切削理论及其设备等。E-mail:zhouzx8@sina.com
基金资助:
国家科技重大专项资助项目（2012ZX04003-041）

Roughness Model for Helical Flute of Cemented Carbide End Mill under Grinding

SONG Tiejun, ZHOU Zhixiong, LI Wei, HUANG Xiangming, CHEN Qidi

College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082

Received:2017-02-11 Revised:2017-06-06 Published:2017-09-05

摘要/Abstract

摘要： 基于立铣刀螺旋槽的加工原理，根据安装参数确定砂轮磨削螺旋槽的磨削接触区；分析螺旋槽磨削接触区内砂轮与工件的等效直径和有效速度，发现立铣刀螺旋槽磨削既有外圆磨削的特点也有内圆磨削的特征。考虑硬质合金工件材料塑性隆起和砂轮速度与工件速度之间夹角对表面粗糙度的影响，建立立铣刀螺旋槽磨削表面粗糙度计算模型，分析砂轮直径、砂轮速度和工件进给速度对磨削表面粗糙度的影响。在五轴联动数控工具磨床上使用金刚石平行砂轮进行螺旋槽磨削试验。使用超景深显微镜对立铣刀螺旋槽磨削表面形貌进行分析，使用白光干涉仪测量螺旋槽磨削表面粗糙度大小。试验结果验证了硬质合金立铣刀螺旋槽磨削表面粗糙度计算模型的正确性。该模型为其他整体式刀具螺旋槽磨削表面粗糙度的计算提供了理论参考。

关键词: 表面粗糙度, 缓进给磨削, 立铣刀, 螺旋槽, 硬质合金

Abstract: Based on the machining principle of end milling helical flute, the grinding contact area in flute grinding is determined by the grinding wheel position. The equivalent diameters and speeds of the wheel and workpiece in flute grinding are analyzed in the contact area. There exist characteristics of cylindrical grinding and internal grinding in helical flute grinding. Then, considering the effect of plastic upheaval deformation of cemented carbide and tilt angle between wheel speed and workpiece speed on surface roughness, the theoretical model of the surface roughness of helical is established. The effects of grinding wheel diameter, grinding wheel speed and workpiece feed rate on the surface roughness are analyzed. The helical flute grinding test is carried out on a five-axis CNC tool grinder using a standard 1A1 diamond grinding wheel. The surface morphology is investigated by using digital microscope. The surface roughness is measured by white light interferometer. Finally, the validity of the proposed model is verified through grinding experiments. This model provides a theoretical reference for the grinding surface roughness calculation of other shank-type tool helical flute.

Key words: cemented carbide, creep feed grinding, end mill, helical flute, surfaces roughness

中图分类号:

TG580

宋铁军, 周志雄, 李伟, 黄向明, 陈启迪. 硬质合金立铣刀螺旋槽磨削表面粗糙度模型研究[J]. 机械工程学报, 2017, 53(17): 185-192.

SONG Tiejun, ZHOU Zhixiong, LI Wei, HUANG Xiangming, CHEN Qidi. Roughness Model for Helical Flute of Cemented Carbide End Mill under Grinding[J]. Journal of Mechanical Engineering, 2017, 53(17): 185-192.

参考文献

[1] KARPUSCHEWSKI B, JANDECKA K, MOUREK D. Automatic search for wheel position in flute grinding of cutting tools[J]. CIRP Annals-Manufacturing Technology, 2011, 60(1):347-350.
[2] 曾滔,周志雄,汤爱民,等. 碟形砂轮加工刀具螺旋槽的磨削参数研究[J]. 中国机械工程, 2015, 26(5):575-580. ZENG Tao, ZHOU Zhixiong, TANG Aimin, et al. Research on grinding parameters in machining helical groove of cutting tools with a dishing wheel[J]. China Mechanical Engineering, 2015, 26(5):575-580.
[3] 李国超, 孙杰. 整体式立铣刀刃磨仿真技术研究现状与发展趋势[J]. 机械工程学报, 2015, 51(9):165-175. LI Guochao, SUN Jie. Current research and development trends of end mill grinding simulation technology[J]. Journal of Mechanical Engineering, 2015, 51(9):165-175.
[4] LIN W S, WANG Y C, HSIAO W C, et al. Grinding performance analysis of diamond wheel for groove grinding[C]//Control and Automation (ICCA), 20108th IEEE International Conference on. IEEE, 2010:608-613.
[5] UHLMANN E, HÜBERT C. Tool grinding of end mill cutting tools made from high performance ceramics and cemented carbides[J]. CIRP Annals-Manufacturing Technology, 2011, 60(1):359-362.
[6] 宋铁军,周志雄,李伟,等. 硬质合金刀具螺旋槽缓进给磨削力研究[J]. 中国机械工程, 2014, 25(9):1153-1157. SONG Tiejun, ZHOU Zhixiong, LI Wei, et al. Research on grinding forces of creep feed grinding cemented carbide tool helical grooves[J]. China Mechanical Engineering, 2014, 25(9):1153-1157.
[7] WANG Y Z, CHEN Y Y, ZHOU G M, et al. Roughness model for tooth surfaces of spiral bevel gears under grinding[J]. Mechanism and Machine Theory, 2016, 104(3):17-30.
[8] MALKIN S, GUO Changsheng. Grinding technologytheory and applications of machining with abrasives[J]. Journal of Manufacturing Processes,2000,2(3):151-157.
[9] 丁国龙,张颂,赵大兴,等. 基于诱导法曲率的齿轮成形磨削干涉分析[J]. 机械工程学报, 2016, 52(3):197-204. DING Guolong, ZHANG Song, ZHAO Daxing, et al. Interference study of gear form grinding based on induced normal curvature[J]. Journal of Mechanical Engineering, 2016, 52(3):197-204.
[10] 修世超, 蔡光起. 快速点磨削周边磨削层模型及参数[J]. 机械工程学报, 2006, 42(11):197-201. XIU Shichao, CAI Guangqi. Edge grinding layer model and parameters in quick-point grinding[J]. Chinese Journal of Mechanical Engineering, 2006, 42(11):197-201.
[11] ZHANG B. Helical scan grinding of brittle and ductile materials[J]. Journal of Materials Processing Technology, 1999, 91(1):196-205.
[12] UHLMANN E, KLEIN T B, KOPROWSKI S. Tilt angle effects in surface grinding with mounted points[J]. Production Engineering, 2014, 8(4):431-442.
[13] ZHANG B, UEMATSU T. Surface generation mechanism in helical scan grinding:An analytical study[J]. Journal of Materials Processing Technology, 1999, 91(1):206-214.
[14] LI K, LIAO W. Modeling of ceramic grinding processes Part I. Number of cutting points and grinding forces per grit[J]. Journal of Materials Processing Technology, 1997, 65(1):1-10.

[1]	郭明龙, 魏兆成, 王敏杰, 李世泉, 刘胜贤. 自由曲面平头立铣刀五轴加工铣削力预报[J]. 机械工程学报, 2019, 55(7): 225-233.
[2]	高尚, 耿宗超, 吴跃勤, 王紫光, 康仁科. 石英玻璃超精密磨削加工的表面完整性研究[J]. 机械工程学报, 2019, 55(5): 186-195.
[3]	梁志强, 郭海新, 张素燕, 王西彬, 周天丰, 刘志兵, 李玉, 陈建军. 微细钻头螺旋槽刃磨试验研究[J]. 机械工程学报, 2019, 55(13): 185-194.
[4]	贾康, 洪军, 张银行. 一种拉刀螺旋容屑槽前刀面磨削砂轮安装位姿计算方法[J]. 机械工程学报, 2019, 55(11): 205-214.
[5]	袁松梅, 唐志祥, 吴奇, 宋衡. 纵扭超声换能器设计及其性能测试研究[J]. 机械工程学报, 2019, 55(1): 139-148.
[6]	商维, 张沭玥, 郭俊, 刘启跃, 王文健. 基于虚拟砂轮建模的钢轨打磨材料去除仿真研究[J]. 机械工程学报, 2018, 54(4): 30-36.
[7]	伍俏平, 王煜, 赵恒, 郑维佳, 邓朝晖. 基于多层钎焊金刚石砂轮在线电解修整技术的超细晶硬质合金精密磨削研究[J]. 机械工程学报, 2018, 54(21): 212-220.
[8]	袁森, 何林, 占刚, 蒋宏婉, 邹中妃. 硬质合金微坑车刀切削304不锈钢时的表面粗糙度研究[J]. 机械工程学报, 2018, 54(15): 232-240.
[9]	路遵友, 吕延军, 李莎, 张伟, 党超, 余娜, 杨婕. 考虑热弹性变形和表面粗糙度的圆柱滚子轴承热弹流润滑分析[J]. 机械工程学报, 2018, 54(13): 159-169.
[10]	李敏, 袁巨龙, 吕冰海, 赵萍, 钟美鹏. Si₃N₄陶瓷的剪切增稠抛光^*[J]. 机械工程学报, 2017, 53(9): 193-200.
[11]	胡松涛, 黄伟峰, 刘向锋, 王玉明. 螺旋槽干气密封稳态特性分析模型的对比研究[J]. 机械工程学报, 2017, 53(23): 7-13.
[12]	张翔宇, 隋翯, 张德远, 吴瑞彪. 超声振动改善深孔镗削加工质量[J]. 机械工程学报, 2017, 53(19): 143-148.
[13]	杨光, 皮钧, 刘中生. 超声振动和切削液联合作用下的刀刃非物理锐化[J]. 机械工程学报, 2017, 53(19): 100-106.
[14]	马廉洁, 巩亚东, 顾立晨, 王华, 田俊超, 李亮. 可加工微晶玻璃陶瓷磨削表面成形机制[J]. 机械工程学报, 2017, 53(15): 201-207.
[15]	刘璨, 吴敬权, 刘焕牢, 谭光宇. 平底立铣刀的切削力尺寸效应研究及其系数估算[J]. 机械工程学报, 2017, 53(13): 199-208.

硬质合金立铣刀螺旋槽磨削表面粗糙度模型研究

Roughness Model for Helical Flute of Cemented Carbide End Mill under Grinding

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价